1. Introduction
Thank you for choosing the NB ERGONOMIC Gaming Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
This heavy-duty monitor arm is designed to support flat, ultrawide, and curved monitors ranging from 32 to 60 inches, with a load capacity of 2-20 kg. It features flexible adjustments for optimal viewing angles and integrated RGB lighting for an enhanced gaming experience.
Video: Overview of the NB ERGONOMIC Gaming Monitor Arm's features, including RGB lighting, space-saving design, and quick installation.
2. Safety Information
Please observe the following safety precautions:
- Ensure all components are present and undamaged before installation.
- Do not exceed the maximum weight capacity of 20 kg.
- Always hang your monitor before making tension adjustments.
- Be careful when releasing the arm to avoid injury from the mechanical spring force.
- Ensure the desktop surface is suitable for mounting (not fragile, too narrow, or with irregular/beveled edges).
3. Package Contents
Verify that all parts are included in your package:
Image: All components included in the NB ERGONOMIC Gaming Monitor Arm package.
4. Setup and Installation
4.1 Desktop Compatibility
Before installation, ensure your desktop is suitable. The following desktop types are NOT suitable:
- Fragile desktops such as marble and glass.
- Desktops with a too narrow clamp surface due to a table bottom baffle.
- Desktops with irregular or beveled edges.
Image: Examples of unsuitable desktop types for monitor arm installation.
4.2 Mounting Methods
The monitor arm supports two mounting methods:
- Grommet Type: For desk thickness 20-90mm (0.8"-3.5") and hole diameter 10-60mm (0.4"-2.3").
- C-Clamp Type: For desk thickness 20-90mm (0.8"-3.5") and a minimum depth of 50mm (1.97") from the bottom of the desk.
Image: Two ways to mount the monitor arm: Grommet type and C-Clamp type.
4.3 Confirm VESA Hole Position
Locate the VESA mounting holes on the back of your monitor. These are typically a square pattern of four holes, either 100x100mm or 75x75mm. If your monitor has an embedded hole and the panel can be placed directly, use it. If the embedded position is small, use the heightening pads and lengthened screws provided.
Image: How to confirm VESA hole position and types of screws provided (M4x10, M4x12).
4.4 Product Installation Guide
Follow these steps for installation:
- Install the base onto your desk using either the grommet or C-clamp method.
- Press the upper arm.
- Slowly release the wrapping tape while pressing the upper arm.
- Slowly release the force until the bracket is fully unfolded.
Warning: Please be careful when releasing the arm to avoid injury from mechanical spring force.
Image: Step-by-step product installation guide.
4.5 Quick Installation of VESA Plate
The monitor arm features a quick-release VESA plate for easy attachment and detachment of your monitor.
Image: Quick installation of the VESA plate onto the monitor arm.
5. Operation
5.1 Adjusting Monitor Position
The monitor arm allows for flexible adjustment of your viewing angle:
- Tilt: Adjust the monitor vertically by ±50°.
- Swivel: Rotate the monitor horizontally 360° at the arm joint and ±90° at the VESA plate.
- Rotation: Rotate the entire monitor 360° (portrait to landscape).
- Lift: Adjust the monitor height up to 10.2 inches (260mm).
- Extension: Extend the monitor up to 24.4 inches (620mm) from the base.
Image: Adjustable angles including Tilt (±50°), Swivel (360°), and Rotation (±90° at VESA, 360° at base).
Image: Maximum extension (24.4" / 620mm) and lift (10.2" / 260mm) capabilities.
5.2 Tension Adjustment
The monitor arm features a mechanical spring for flexible adjustment. Adjust the tension to match your monitor's weight:
- If the monitor raises up: Turn the adjustment screw towards the '–' direction to reduce tension for a lighter monitor.
- If the monitor falls down: Turn the adjustment screw towards the '+' direction to increase tension for a heavier monitor.
Note: Always hang your monitor on the arm before performing tension adjustments.
Image: Tension adjustment mechanism and instructions.
5.3 RGB Lighting Control
The monitor arm includes integrated RGB lighting for an enhanced aesthetic. Control the lighting as follows:
- Turn on/Adjust Mode: Press the light control button once to turn on the light or cycle through different light modes.
- Turn off: Long press the light control button to turn off the lights.
Image: RGB light control instructions: one click for on/mode, long press for off.
6. Maintenance
To ensure the longevity and optimal performance of your monitor arm:
- Regularly check all screws and connections to ensure they are tight.
- Clean the surface of the monitor arm with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodically check the tension adjustment to ensure it is appropriate for your monitor's weight.
7. Troubleshooting
If you encounter any issues, please refer to the following:
- Monitor not holding position (sags or rises): Adjust the tension screw as described in Section 5.2. Ensure the monitor weight is within the 2-20kg capacity.
- Arm feels stiff or difficult to move: Check for any obstructions. Ensure the tension is not set too high for a lighter monitor.
- RGB lights not working: Check the power connection to the monitor arm. Ensure the light control button is functioning correctly.
For further assistance, please contact customer support.
8. Specifications
Image: Detailed product parameters table.
| Feature | Specification |
|---|---|
| Brand Name | NB ERGONOMIC |
| Model Number | L60/G70 |
| Material | Aluminum Alloy + ABS |
| Color | Black |
| TV Screen Size | 32'' - 60'' Monitor |
| Swivel Angles | ±90° |
| Tilt Angles | ±50° |
| Rotation Angles | 360° |
| Load Capacity | 2-20 kg |
| Retractable Distance | 620 mm (24.4") |
| Lift Height | 260 mm (10.2") |
| VESA Size (HxV) | 75x75 mm / 100x100 mm |
| Mounting Method | Clip type / Hole type mounting |
| Product Usage | Home, Office, Commercial Use etc. |
9. User Tips
- Cable Management: Utilize the integrated cable management system to keep your desktop tidy and free up space.
- Optimal Viewing: Experiment with the tilt, swivel, and rotation features to find the most comfortable and ergonomic viewing position for your setup.
- Gaming Immersion: Leverage the RGB lighting effects to match your gaming ambiance and enhance your overall experience.
Image: Organized cable management for a clean desktop.
10. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.
Contact Information:
- Contact Person: Verena
- Whatsapp: +86 17352886509
- Email: 3117780177@qq.com
