1. Introduction
This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of the JCW-CS03 Automatic Copper Wire Stripper Cutter Insulation Removal Machine. This machine is designed for precise cutting and stripping of various wire types, enhancing productivity in wire processing applications.
2. Safety Instructions
- Always wear appropriate personal protective equipment (PPE), including safety glasses, when operating the machine.
- Ensure the machine is properly grounded before connecting to a power source.
- Keep hands and loose clothing away from moving parts, especially the cutting blades and rollers.
- Do not operate the machine if any safety guards are removed or damaged.
- Disconnect power before performing any maintenance, adjustments, or cleaning.
- Ensure adequate ventilation in the work area.
- In case of emergency, immediately press the EM-STOP button.
3. Product Overview
The JCW-CS03 is an automatic wire processing machine featuring a user-friendly interface and robust construction for reliable performance.
3.1. Main Components

This diagram highlights key components including the 4.3" Color Touch Screen for precise and easy programming, START/STOP/EM-STOP Buttons for operation control, a Meter for measurement, a Straightener for wire alignment, a Wire Sensor that automatically stops and alarms when wire runs out, and Safety Guards with sensors to protect the operator.

The wire sensor ensures continuous operation by detecting wire presence, while the safety guard provides essential operator protection.

The tuning knob allows for fine adjustment of roller gap and pressure, and the left rollers can be quickly lifted for easy wire loading. The wire straightener is constructed from steel and aluminum for robust design.
4. Specifications
| Feature | Specification |
|---|---|
| Function | Wire measuring, Cut into length, Full stripping, Partial stripping, Middle strip, Length correction, Data library |
| Raw Material / Wire Type | PVC, Teflon, Silicone, Low halogen, Fiberglass, PUR, Rubber, Tefzel, Kapton, etc. |
| Conductor Cross-sections (Wire Range) | 0.03 - 6.0 mm² [ AWG30 - AWG 10 ] |
| Cutting Length (L) | 27 - 999999 mm |
| Cutting Length Accuracy | 0.002 x L |
| Stripping Length | Front (right) side: max 40 mm, Rear (left) side: max 30 mm |
| Production Rate | 4600 pcs/h (by 50mm wire length) |
| Display | 4.3" color touchscreen, English / Chinese (Other languages on request) |
| Compatible Peripherals | Wire prefeeder, robot arm, conveyor belt |
| Power Supply | AC 110 - 220 V ± 10%, 50 / 60 Hz |
| Air Supply | 0.4 - 0.7 MPa (clean and dry air) |
| Dimensions (Machine) | L 460 x W 470 x H 350 mm |
| Dimensions (Straightener) | 300 mm |
| Weight | 35 KG |
| Origin | Mainland China, Shandong, China |
| High-concerned chemical | None |
| Advantage | Automatic cut length calibration, Wire lack sensor |
5. Setup
- Unpacking: Carefully remove the machine from its packaging. Inspect for any damage during transit.
- Placement: Place the machine on a stable, level surface in a well-ventilated area. Ensure sufficient space around the machine for operation and maintenance.
- Power Connection: Connect the machine to a grounded AC 110 - 220 V ± 10%, 50 / 60 Hz power supply.
- Air Supply Connection: Connect a clean and dry air supply to the machine, ensuring the pressure is between 0.4 - 0.7 MPa.
- Wire Straightener Installation: Attach the wire straightener to the designated input side of the machine.
- Safety Guard Installation: Ensure all safety guards are correctly installed and secured.
6. Operation
6.1. Basic Operation Steps
- Power On: Turn on the main power switch. The 4.3" color touchscreen will illuminate.
- Language Selection: If necessary, select your preferred language (English/Chinese) from the touchscreen interface.
- Program Settings:
- Use the touchscreen to input desired cutting length (27 - 999999 mm).
- Set the front (right) stripping length (max 40 mm) and rear (left) stripping length (max 30 mm).
- Select the desired function: Full stripping, Partial stripping, or Middle strip.
- Adjust roller gap and pressure using the tuning knob (Figure 3) to match the wire diameter. Ensure the rollers are tight enough to grip the wire without deforming it.
- Wire Loading: Carefully feed the wire through the straightener and into the machine's feeding mechanism. The wire sensor will detect the presence of the wire.
- Start Operation: Press the green START button to begin the automatic cutting and stripping process.
- Monitoring: Observe the machine's operation. The wire sensor will automatically stop the machine and trigger an alarm if the wire runs out.
- Stop Operation: To pause or stop the operation, press the red STOP button. For emergency stops, press the EM-STOP button.
6.2. Visual Demonstration
This video illustrates the machine's operation, showing how different types of wires are fed, cut, and stripped with precision.

Examples of various wires after being processed, demonstrating the machine's versatility and precision.
7. Maintenance
- Daily Cleaning: Clean the machine daily to remove wire debris and dust. Use a soft cloth and avoid abrasive cleaners.
- Blade Inspection: Regularly inspect the cutting blades for wear or damage. Replace dull or chipped blades to maintain cutting accuracy.
- Roller Inspection: Check the feeding rollers for wear and ensure they are clean and free of residue. Clean with a suitable solvent if necessary.
- Lubrication: Apply appropriate lubricant to moving parts as indicated in the machine's internal maintenance guide (refer to manufacturer for specific points and frequency).
- Air Filter: Regularly check and clean or replace the air filter for the pneumatic system to ensure a clean air supply.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates for the touchscreen interface.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply, loose connection, tripped breaker | Check power cable, ensure power outlet is functional, reset circuit breaker. |
| Wire not feeding properly | Incorrect roller pressure, worn rollers, wire tangled, wire sensor blocked | Adjust roller pressure, clean/replace rollers, untangle wire, clear wire sensor. |
| Inaccurate cutting/stripping length | Incorrect program settings, dull blades, wire slippage | Verify program settings on touchscreen, replace blades, adjust roller pressure. |
| Machine stops unexpectedly | Wire ran out (wire sensor activated), safety guard open, emergency stop pressed | Reload wire, close safety guard, reset emergency stop. |
| Air pressure low/unstable | Air supply issue, clogged air filter | Check air compressor, clean/replace air filter. |
9. User Tips
- For optimal performance, always use high-quality wires within the specified diameter range.
- Regularly back up your custom program settings if the machine supports data export.
- When processing very fine wires, ensure the roller pressure is set precisely to avoid damage to the conductor.
- Keep the touchscreen clean to ensure responsiveness and visibility.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your authorized JCW dealer or the manufacturer directly. Ensure you have your machine's model number (JCW-CS03) and serial number ready when contacting support.