ECHTPower EP01

Contents

ECHTPower Wireless Game Controller User Manual

Model: EP01

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your ECHTPower Wireless Game Controller (Model EP01). Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

The ECHTPower EP01 is a versatile wireless gamepad featuring Hall Effect joysticks, a 1000Hz polling rate, and multi-platform compatibility for PC, Nintendo Switch, iOS, and Android devices. It includes customizable RGB lighting, adjustable turbo functions, and vibration feedback for an enhanced gaming experience.

Package Contents

Ensure all items are present in the package:

  • Wireless Controller x 1
  • Charging Cable x 1
  • Receiver x 1
  • Instruction Manual x 1

A visual representation of the package contents:

ECHTPower Wireless Gamepad and accessories including USB receiver and charging cable

Image: ECHTPower Wireless Gamepad, USB receiver, and charging cable.

Specifications

FeatureSpecification
Battery Capacity800mAh
Charging Voltage/Current5V/0.75A
Battery Charging Time2-3 hours
Usage Time15 hours
Receiver/Wired Report Rate1000Hz
Bluetooth/NS Report Rate125Hz
Trigger Button TypeLinear
Compatible PlatformsPC, Android, iOS, Nintendo Switch, Steam Deck, Tesla
Joystick Sensor ModuleK-SLIVER Hall Effect

Controller Layout

Familiarize yourself with the buttons and ports on your controller:

Diagram of the ECHTPower Wireless Gamepad showing all buttons and ports

Image: Front view of the controller with labels for Left Joystick/L3, D-pad, Back Button, Home Button, Start Button, Share Button, A/B/X/Y Buttons, M Button, Right Joystick/R3.

Diagram of the ECHTPower Wireless Gamepad showing shoulder buttons, triggers, and charging port

Image: Top view of the controller with labels for RB Button, LB Button, RT Button, LT Button, and Type-C Charging port.

Diagram of the ECHTPower Wireless Gamepad showing the back with mode switch and reset button

Image: Back view of the controller with labels for Reset Button and Mode Switch (F/BT/NS).

Setup and Connection

Wireless Receiver Connection (PC)

  1. Plug the USB receiver into an available USB port on your computer.
  2. Set the back mode switch on the controller to the 'F' position (2.4G wireless mode).
  3. Press the HOME button on the controller. The controller will automatically connect, and the HOME button light will turn green.
  4. For subsequent use, simply press the HOME button to reconnect the controller.
Diagram showing wireless receiver connection to PC

Image: Steps for connecting the controller to a PC using the wireless USB receiver.

Wired Connection (PC)

  • Set the back mode switch to 'F' or 'BT' or 'NS'.
  • Connect the controller to your PC using the provided USB-C cable.
  • If the HOME button light is green, the connection is successful.

Bluetooth Connection (PC)

  1. Set the back mode switch to the 'BT' position (Bluetooth mode).
  2. Press and hold the HOME button for 3 seconds until the green light flashes quickly.
  3. On your computer, enable Bluetooth and connect to "Xbox Wireless Controller".
  4. After successful connection, the green indicator light on the controller will turn on.
  5. For subsequent use, simply press the HOME button to reconnect the controller.

*Note: After connecting to PC via Bluetooth, you can press and hold the 'Back' and 'Start' buttons simultaneously to switch to Dinput mode for retro emulator games. The yellow light will blink in Dinput mode. You may need to reconnect for the first time Dinput connection.

Connect to Nintendo Switch

  1. On the Switch home page, navigate to "Controllers" then "Change Grip/Order".
  2. Set the back mode switch on the controller to the 'NS' position (Nintendo Switch mode).
  3. Press and hold the HOME button until the white indicator light blinks quickly.
  4. Follow the on-screen prompts on the Switch interface to connect. The white indicator light will remain on after successful connection.
  5. For subsequent use, simply press the HOME button to reconnect and wake up your Switch.

In Switch mode, the key mapping is as follows: Y=X, X=Y, B=A, A=B. The Screenshot button functions as the screenshot button, and the Home button functions as the Home button.

Connect to iOS Devices

  1. Set the back mode switch to the 'BT' position (Bluetooth mode).
  2. Press and hold the HOME button for 3 seconds. The green light will blink quickly. (If the yellow light blinks, press and hold 'Back' + 'Start' until the green light blinks).
  3. On your iOS device, open Bluetooth settings and connect to "Xbox Wireless Controller".
  4. After successful connection, the green indicator light on the controller will turn on.
  5. For subsequent use, simply press the HOME button to reconnect the controller.

Connect to Android Devices

  1. Set the back mode switch to the 'BT' position (Bluetooth mode).
  2. Press and hold the HOME button for 3 seconds. The green light will blink quickly. Then press and hold 'Back' + 'Start' until the yellow light blinks quickly.
  3. On your Android device, open Bluetooth settings and connect to "ECHTPower EP01".
  4. After successful connection, the yellow indicator light on the controller will turn on.
  5. For subsequent use, simply press the HOME button to reconnect the controller.

Operating Instructions

Basic Functions

  • Power On: Press the HOME button.
  • Power Off: Switch the back mode switch, or the controller will shut down automatically after 30 minutes of inactivity.
  • Low Battery Indicator: The HOME button indicator will blink red slowly.
  • Charging Indicator: The HOME button indicator will blink slowly while charging.
  • Reset: Insert a sim-card tool (or similar thin object) into the reset hole on the back of the controller to reset.

TURBO Function

The Turbo function allows for rapid, repeated input of a button press.

  • Supported Buttons: A, B, X, Y, D-pad, LB, RB, LT, RT.
  • Manual Turbo: Press the M button and the desired button simultaneously to activate manual turbo. The controller will vibrate once to confirm.
  • Auto Turbo: With manual turbo already set, press the M button and the same button again to activate auto turbo. The controller will vibrate once to confirm.
  • Disable Turbo: With auto turbo already set, press the M button and the same button again to disable the turbo function. The controller will vibrate once to confirm.
  • Turbo Speed Adjustment: Press and hold the M button, then push the left joystick left or right to adjust the turbo speed (Fast/Medium/Slow). The HOME button light will blink according to the set turbo speed.

Vibration Adjustment

Adjust the intensity of the vibration feedback:

  • Press and hold the M button, then push the left joystick up or down to adjust the vibration level (Strong/Medium/Weak/Off). There are 4 levels.

Brightness Adjustment (RGB Ring)

Adjust the brightness of the RGB lighting rings around the joysticks:

  • Press and hold the M button, then push the right joystick up or down to increase or decrease the RGB ring brightness (Strong/Medium/Weak/Off). There are 4 levels.

Light Mode Adjustment (RGB Ring)

Change the lighting effects and colors of the RGB rings:

  1. Press and hold the M button, then press the R3 button (right joystick press) to cycle through RGB modes:
    • Trigger-Tracing Mode: RGB brightness changes with trigger input.
    • Solid Mode: Constant light.
    • Breathing Mode: Pulsating light.
    • Flowing Mode: Dynamic color flow (color cannot be changed in this mode).
  2. In any mode (except Flowing Mode), press and hold the M button, then push the right joystick left to change the color of the RGB ring. Colors cycle through: Colorful, Red, Orange, Yellow, Green, Cyan, Blue, Purple, Off.

Video: Demonstrates the RGB lighting effects, turbo function, and vibration adjustment of the controller.

Troubleshooting

  • Controller not connecting:
    • Ensure the mode switch on the back of the controller is set to the correct position (F for 2.4G, BT for Bluetooth, NS for Switch).
    • For wireless connections, ensure the receiver is properly plugged into the device.
    • For Bluetooth, ensure Bluetooth is enabled on your device and the controller is in pairing mode (flashing light).
    • Try resetting the controller by inserting a thin object into the reset hole.
    • Ensure the controller is charged.
  • Input lag or dropped connections:
    • Ensure the controller is within range of the receiver or Bluetooth device.
    • Minimize interference from other wireless devices.
    • For PC, try using a wired connection if wireless performance is inconsistent.
  • Joysticks drifting:
    • The controller uses Hall Effect joysticks, which are designed to prevent drift. If you experience drift, try resetting the controller.
    • Ensure the controller's firmware is up to date (check manufacturer's website for updates).
  • Buttons not responding:
    • Ensure the controller is properly connected.
    • Test buttons in different games or system menus to isolate the issue.
    • Try resetting the controller.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
  • Avoid Drops: Handle the controller with care to prevent damage from drops or impacts.

Safety Warnings

  • This product contains small detachable parts. Keep it away from children under 3 years old to prevent choking hazards.
  • Do not use this product near fire or high heat sources.
  • Do not disassemble or modify the product. Unauthorized modifications may void the warranty and pose safety risks.
  • Do not place this product in a humid or foggy environment.
  • Do not use this product for purposes other than its intended design.
  • Dispose of the product and its parts according to local environmental laws and guidelines. Do not dispose of it as household waste.

For more detailed safety and compliance information, please refer to the full user manual available as a PDF: User Manual (PDF).

Contact and Support

For technical support, warranty information, or other inquiries, please contact:

  • Telephone: 0755-21010839
  • Email: service@echtpower.com
  • Website: www.echtpower.com
  • Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
  • Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A88F-ES01.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.