DayPlus 1500W Steam Mop

Contents

DayPlus 1500W Steam Mop & Detachable Steam Cleaner Instruction Manual

Model: 1500W Steam Mop

1. Introduction

Thank you for choosing the DayPlus 1500W Steam Mop & Detachable Steam Cleaner. This powerful and versatile appliance is designed to provide efficient, chemical-free cleaning and sanitization for a variety of surfaces in your home. Please read this manual thoroughly before first use to ensure safe and optimal operation.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

  • Read all instructions carefully before use.
  • Do not immerse the appliance in water or other liquids.
  • Do not leave the steam mop unattended while powered on.
  • Keep the appliance out of reach of children and pets.
  • Use only clean tap water in the water tank. Do not add cleaning solutions, perfumes, or other chemicals, as this can damage the appliance and void the warranty.
  • Do not use the steam mop on unsealed hardwood floors or any other surfaces that are sensitive to heat or moisture.
  • Always ensure the mop pad is properly attached before operating.
  • Unplug the appliance from the power outlet when not in use and before performing any maintenance.
  • Allow the appliance to cool completely before storing.

3. Package Contents

Please check the box for the following items:

  • 1 x DayPlus Steam Mop (Main Unit)
  • 1 x Handle Assembly
  • 2 x Microfiber Mop Cloths
  • 1 x Carpet Glider
  • 1 x Measuring Cup
  • 1 x Instruction Manual
DayPlus Steam Mop components including main unit, handle, mop pads, measuring cup, and carpet glider.
Figure 1: Included components of the DayPlus Steam Mop.

4. Specifications

FeatureSpecification
Brand NameDayPlus
Power (W)>1400W (typically 1500W)
Water Tank Capacity400ml
Power TypeElectric
Power SourceElectric
Hign-concerned ChemicalNone (chemical-free cleaning)
OriginMainland China
Power Cord Length4.8 meters (16 FT)
Steam Volume>28g/min
Steam Port Temperature>100℃ (90-110°C)
Heat-up TimeApprox. 20 seconds
Metal Rod MaterialAluminum tube
Handle MaterialABS
Product dimensions showing height of 115.5cm/45 inches, base width of 31.5cm/12 inches, and power cord length of 4.8m/189 inches.
Figure 2: Product Dimensions.

5. Setup

Follow these steps to assemble your DayPlus Steam Mop:

  1. Attach the Handle: Insert the handle into the main unit until it clicks securely into place.
  2. Manage Power Cord: The power cord can be wrapped around the hook on the handle for neat storage.
  3. Attach Mop Cloth: Securely attach one of the microfiber mop cloths to the bottom of the mop head. The mop cloths are designed to enhance absorbency and effectively clean dirt and grime.
  4. Attach Carpet Glider (for carpets): If cleaning carpets, place the mop head with the attached mop cloth into the carpet glider. This helps the steam mop move smoothly over carpeted surfaces.
  5. Fill Water Tank: Open the water tank cap on the main unit. Using the provided measuring cup, add appropriate amount of clean tap water to the 400ml water tank. Do not overfill. Close the water tank cap securely.
Video 1: Assembly and Water Filling Guide. This video demonstrates how to assemble the handle, attach the mop cloth, use the carpet glider, and fill the water tank.
A hand filling the 400ml water tank of the steam mop with a measuring cup.
Figure 3: Filling the 400ml water tank. Ensure not to overfill.

6. Operating Instructions

  1. Power On: Plug the steam mop into a suitable electrical outlet. Press the power switch (red button) located on the main unit. The LED indicator light at the front of the main body will turn green.
  2. Preheating: Allow the appliance to preheat for approximately 20 seconds. Once preheated, the steam mop will begin to emit steam.
  3. Cleaning: Move the steam mop slowly and steadily over the surface you wish to clean. The high-temperature steam (90-110°C) effectively cleans and sanitizes without the need for harsh chemicals.
  4. Suitable Surfaces: The steam mop is suitable for various sealed floor surfaces including marble, ceramic tile, stone, linoleum, sealed hardwood flooring, and parquet. When cleaning carpets, use the carpet glider.
  5. Continuous Use: The 400ml water tank provides approximately 10-15 minutes of continuous steam. You can refill the tank and continue cleaning without interruption.
  6. Power Off: When finished cleaning, press the power switch to turn off the appliance and unplug it from the electrical outlet.
Diagram showing various floor types suitable for the steam mop: Marble, Ceramic Tile, Stone, Carpet, and Sealed Hardwood Flooring.
Figure 4: The steam mop is suitable for various flooring types.
Graphic illustrating efficient sterilization with steam, showing steam reaching 90-110°C to eliminate germs.
Figure 5: Efficient sterilization with high-temperature steam.
A woman using the steam mop on a floor with a child playing nearby, highlighting deep cleaning at 212°F and 99.9% removal of stubborn stains.
Figure 6: Environmentally friendly steam cleaning for deep cleaning and stubborn stains.

7. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your steam mop.

  • Cleaning Mop Cloths: After each use, remove the microfiber mop cloth and wash it. They are typically machine washable.
  • Emptying Water Tank: After use, always empty any remaining water from the tank.
  • Descaling: If you live in an area with hard water, mineral deposits may build up over time. Periodically descale the appliance by running a solution of equal parts white vinegar and water through it, then rinse thoroughly with clean water. Refer to the full manual for detailed descaling instructions.
  • Storage: Store the steam mop in a cool, dry place. Wrap the power cord neatly around the handle hooks.

8. Troubleshooting

ProblemPossible CauseSolution
No steam producedWater tank empty; Appliance not plugged in; Power switch off; Clogged nozzle.Fill water tank; Ensure power cord is securely plugged in; Turn on power switch; Refer to descaling instructions.
Mop not heating upPower issue; Faulty heating element.Check power connection and outlet; Contact customer support if issue persists.
Water leakageWater tank cap not secured; Overfilled water tank; Damaged seal.Ensure water tank cap is tightly closed; Do not overfill; Contact customer support.
Mop not moving smoothly on carpetCarpet glider not attached.Attach the carpet glider as described in the Setup section.

9. User Tips

  • Corded Operation: This steam mop is an electric appliance and requires continuous connection to a power outlet during operation.
  • Replacement Mop Pads: If you need additional or replacement blue microfiber mop pads, please contact the seller or check their product listings for compatible accessories.
  • Pre-sweep Floors: For best results, sweep or vacuum your floors before using the steam mop to remove loose dirt and debris.
  • Spot Cleaning: For stubborn spots, hold the steam mop over the area for a few extra seconds to allow the steam to penetrate and loosen the grime.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller directly through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.