1. Introduction
Thank you for choosing the LEHX Universal Android Car Radio Multimedia Player. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
The LEHX car radio features a 10.1-inch QLED screen, 8-core processor, Android 14 operating system, built-in DSP, and supports Carplay and Android Auto. It is designed to enhance your driving experience with advanced multimedia and navigation capabilities.
Figure 1: LEHX 10.1-inch Universal Android Car Radio Multimedia Player
2. Safety Information
Before proceeding with installation or operation, please observe the following safety guidelines:
- Ensure the vehicle's ignition is off and the battery is disconnected before any wiring work.
- Incorrect wiring can cause damage to the unit, vehicle, or lead to fire.
- Do not operate the device in a way that distracts you from driving.
- Professional installation is highly recommended to avoid damage and ensure proper functionality.
- Keep the unit away from water and moisture.
3. Setup and Installation
3.1. Before Installation
Upon receiving the product, do not install it directly into the car. Due to the long journey, the product may be affected. Please test the unit before installation. If you have any questions about compatibility (frame or cable), contact customer service before ordering.
3.2. Rear Interface Description
Familiarize yourself with the rear connections of the car radio. The following diagram illustrates the various ports and their functions.
Figure 2: Rear Interface and Accessories for LQ/L6X/L6 Plus and L5 Pro/L6 Pro Series
Power Plug Connections:
- Yellow (BATTERY B+): Constant 12V power supply. Keeps power on and retains memory.
- Red (ACC): Ignition switch 12V power supply.
- Black (GND): Ground wire.
- Orange (ILLUMINATION): Illuminates backlight.
- Pink (REVERSE): Reversing camera control line.
- Brown (KEY2) & Orange/Black (KEY1): Steering Wheel Control lines.
- Blue (ANT): Auto Antenna Power.
- Speaker Cables: 8 speaker cables (Front Left/Right, Rear Left/Right). Each cable must not be grounded, shared, or touch other lines to prevent sound distortion or unit damage.
Other Connections:
- F-CAM (VIDEO-IN-2): Video Input 2 (Front Camera Input).
- AUX R IN / AUX L IN: Right/Left Audio Input.
- VIDEO-IN-1: Video Input 1.
- VIDEO OUT: Video Output.
- FR OUT / FL OUT: Front Right/Left Audio Output.
- SUB WOOF: Subwoofer Output.
- MIC: Microphone Input.
- AMP CONT: Amplifier Control.
- BT Antenna: Bluetooth Antenna.
- WiFi Antenna: Wi-Fi Antenna.
- USB1/2: USB Ports.
- Protocol Box: Use only when needed (e.g., for CANBUS).
3.3. CANBUS Connection
The CANBUS system allows the car radio to communicate with your vehicle's electronic systems. There are different connection methods for high-end and low-end models.
Figure 3: CANBUS Connection for High-End and Low-End Models
For High-End Models: Disconnect the CANBUS box and then connect the CANBUS wires.
For Low-End Models: Connect the CANBUS box and then disconnect the CANBUS wires.
Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.
3.4. Reversing Camera Installation
A reversing camera provides a clear view of the area behind your vehicle, aiding in parking and maneuvering. The following steps detail the wiring for a reversing camera.
Figure 4: Reversing Camera Wiring Diagram
- Yellow cable (1): Connect to the navigation reversing video input socket.
- Red cable (2): Connect to the reverse detection line of the navigation adapter (BACK or REVERSE).
- Connect (3) and (4) together: Then connect to the positive pole of the reverse light power supply.
- Black cable (5): Connect to the body screw (ground) or the negative pole of the reverse light power supply.
The camera itself (part A in the diagram) connects to the positive and negative power of the reversing light. The navigation reversing image or reversing display (part B in the diagram) is shown on the head unit.
Important: If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave it unconnected. Otherwise, the unit may not display properly or may automatically enter reverse mode, causing malfunction. If this occurs, disconnect the REVERSE/BACK line as soon as possible.
4. Operating Instructions
4.1. Steering Wheel Control Learning
To use your vehicle's steering wheel controls with the LEHX car radio, you need to program them:
- Press and hold a button on the original car's steering wheel.
- On the car radio screen, find the corresponding button icon for the function you want to assign.
- Click the icon to change its color. Successful learning is indicated by the color change.
Figure 5: Steering Wheel Control Learning Interface
If your order includes a CANBUS, ensure the CANBUS type is correctly set for the buttons to function. Contact customer service for assistance if needed.
4.2. Apple CarPlay and Android Auto
The LEHX car radio supports both Apple CarPlay and Android Auto for seamless smartphone integration.
Figure 6: Apple CarPlay and Android Auto Interfaces
Apple CarPlay (Some models support):
- Wired Connection: Connect your iPhone using a USB data cable. The CarPlay interface will launch automatically.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your iPhone, then connect to the car radio's Bluetooth. CarPlay will launch automatically. The signal is transmitted via Wi-Fi. If Wi-Fi is off, CarPlay will disconnect.
Android Auto (Some models support):
This feature may not be supported in all countries, and Google Play services must be available locally.
- Download and install the "Android Auto" app from Google Play.
- Use an Android 6.0 or higher phone with a valid data cable connection.
- Wired Connection: Connect your Android phone using a USB data cable. The Android Auto interface will launch automatically.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your Android phone, then connect to the car radio's Bluetooth. Android Auto will launch automatically. The signal is transmitted via Wi-Fi. If Wi-Fi is off, Android Auto will disconnect.
4.3. Multimedia and Navigation Features
The unit offers a variety of features for entertainment and navigation:
- FM/AM Radio: Tune into your favorite radio stations.
- DSP (Digital Sound Processor): High-quality DSP for enhanced audio experience, offering advanced sound settings and surround sound options.
- GPS Navigation: Built-in offline maps with free updates. Supports online navigation apps like Waze, Navitel, Yandex, and IGO. After the first successful satellite signal search, time and date will update.
- Voice Control: Use voice commands for navigation, radio, Bluetooth, music, and volume adjustments.
- Bluetooth 5.1: For hands-free calling and wireless music streaming.
- 4G Internet Support: Stay connected on the go.
- Split Screen Display: Run two applications simultaneously on the screen.
- QLED Screen: 1280*720 or 1280*800 resolution for better color accuracy, brightness, and contrast.
- Button Light: Customizable multi-color button backlighting.
- Full RCA Video Output: Allows connection to external monitors (requires purchase of accessories).
- DAB+ Tuner Ready: Enjoy high-quality digital audio broadcasting (requires optional DAB+ radio receiver stick).
- OBD2 Support: Connect an optional Vgate Icar2 Bluetooth OBD2 scanner to monitor vehicle data (supports most OBDII protocols).
- TPMS Support: Display tire pressure information with optional LEHX USB TPMS sensors.
- DVR Support: Connect an optional LEHX USB ADAS X8 DVR for driving recording (L6 Pro Version Only).
- Dual SIM Socket: For 4G connectivity.
- UI Interface Display: Professional and customizable user interface.
4.4. Changing Boot Logo
You can customize the boot logo of your device:
- Go to Configuration > Car Information > General > Boot Logo.
- Enter the password: L6/L6Plus models use 8888, L6Pro models use 3368.
- Select your desired logo.
5. Troubleshooting
This section addresses common issues and provides solutions. If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact customer service.
5.1. Cannot Boot Normally
- Wiring Check: Ensure the Yellow (B+), Red (ACC), and Black (GND) wires are correctly connected. Yellow to positive, Red to key control, Black to negative. Incorrect or insufficient connections will prevent booting.
- Original Car Wiring: Do not connect the unit's wiring directly to the original car's wiring by color, as car wiring colors are not standard. This can cause damage or prevent the unit from turning on.
- Original Car Plug: The original car plug cannot be directly plugged into the new unit. Even if it fits, it may not work or could burn out.
- Fuse Check: If the 3 wires are connected correctly but it doesn't boot, check the fuse on the yellow line. If the fuse is fine, twist the yellow and red wires together, turn the key, and press the power button.
- Repeated Fuse Blowing: If the fuse blows repeatedly, it indicates a short circuit in the unit's protection circuit. The unit may be faulty.
- Final Check: If all checks fail, connect the yellow and red wires to a 12V battery's positive terminal and the black wire to the negative terminal. If it boots, the issue is with your car's wiring. If it doesn't boot, the unit is faulty.
5.2. Automatic Shut-down
- Cable Error: If the blue (automatic antenna power supply) cable is connected to the unit's power cable, it will automatically shut down. Follow correct wiring.
- Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down, the unit is faulty. If it works fine, replace your car's power supply.
5.3. Audio Issues
- Noise: If there is noise at high volumes, the original speaker power might be too low. Reduce volume or replace speakers.
- Speaker Cable Grounded: If speaker cables are grounded, connect them directly to the unit's speaker output.
- No Sound After Installation: Check if speaker cables are short-circuited or connected incorrectly. Reconnect if necessary. If only 2 speaker cables are available, your car's wiring may not match the unit; you may need to re-route the car's wiring to provide 4 speaker cables (2 per speaker).
- No Sound After a While: Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple tail lines. If there's sound, your car's speaker line is short-circuited or the speaker is damaged. If there's no sound, the unit is broken.
5.4. Remote Control Cannot Be Used
Test the remote control by pointing it at a mobile phone camera and pressing a button. If the remote's light flashes on the camera screen, it has power. If not, replace the battery.
5.5. Settings Not Saved (No Memory)
- Ensure the yellow (B+) and red (ACC) wires are connected separately to their respective positive and key control sources.
- Check if the yellow and red wires are reversed; swap them if necessary.
5.6. Bluetooth Not Working
Turn on the unit, search for its Bluetooth name on your mobile phone, and click Connect. After connecting, you should be able to make calls and play music via Bluetooth.
5.7. Product Emits Smoke
Replace the FUSE. If the problem persists, the internal circuit is burned. After-sales service is required.
5.8. Reversing Camera Does Not Display
- Wrong or Missing Wiring: Ensure the camera is correctly wired as per the installation method (Section 3.4).
- Faulty Camera: If the camera's light does not illuminate when properly wired, the camera is broken and needs replacement.
5.9. USB Devices Cannot Be Played
Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.
5.10. FM Does Not Receive Radio Stations
- Ensure the antenna plug is fully inserted and the antenna line is not disconnected.
- Perform an automatic station search (press AS) or manually search using the before/after buttons.
- If the above steps don't work, unplug the antenna plug and insert a screwdriver or metal strip into the antenna port as a temporary antenna.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | LEHX |
| Operating System | Android |
| RAM | 6GB (Optional: 2G, 4G) |
| ROM | 128GB (Optional: 16G, 32G, 64G) |
| CPU | MTK 8227 - 4core (8-core for L6 Pro) |
| Display Size | 10.1" |
| Resolution | QLED 1280*800 (4G version: QLED 1280*720) |
| Out Power | 50x4 |
| Voltage | 12 V |
| Item Weight | 1.45kg |
| Item Size | 240*146mm |
| Max External Memory | 128G |
| Special Features | Wifi function, Support steering wheel control, Support 4G Network, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Simplified Chinese, Traditional Chinese, English, Russian, Spanish, French, etc.) |
| Din | Double Din |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| TF/Micro SD Slot | 0 |
| AV-OUT | WiFi version support, 4G version not support |
| Interface | 2*USB RCA Bluetooth (OPTIONAL) |
| Microphone | Built-in |
| GPS Navigation map | Built-in offline map free update (support navitel/Igo) |
| Bluetooth phone book | Support |
| Bluetooth music | Support |
| Carplay | Support |
| Android auto | Support |
| Certification | CE |
Figure 7: LEHX Product Qualification Certificates
7. Warranty and Support
7.1. Warranty Information
The LEHX Universal Android Car Radio Multimedia Player comes with a 1-year warranty. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
7.2. Technical Support
LEHX provides a professional technical team to offer free technical services. If you encounter any questions or issues after purchasing, please contact customer service for prompt assistance. We are a professional and responsible factory dedicated to providing the best shopping experience.
For additional guidance, you can refer to the official user manual PDF: View User Manual (PDF).
You can also find more help by scanning the QR codes below to contact customer service via WhatsApp or other platforms.
Figure 8: LEHX Factory and Customer Service Contact Information (QR codes for WhatsApp, TikTok, Instagram)
8. User Tips
- Compatibility Check: Before ordering, always confirm with customer service if the frame or cables are suitable for your specific car model to ensure proper fit and functionality.
- Professional Installation: It is highly recommended to have the unit installed by professionals to prevent damage to your car's dashboard or the device itself.
- CANBUS Configuration: If your vehicle uses CANBUS, ensure the correct CANBUS type is set in the unit's settings for steering wheel controls and other integrated features to work properly. Contact customer service for guidance on CANBUS settings.
- GPS Time Sync: After the first successful search for satellite signals, the device's time and date will automatically update.
- Memory Usage: Be aware that the operating system and pre-installed applications will consume a portion of the internal memory. Navigation maps, especially for larger regions like Europe, can require significant storage (e.g., Europe map ~6.8GB).