1. Introduction
The MICTUNING RL100 Keyless RV Door Lock provides advanced security and convenience for your RV, camper, 5th wheel, or bumper-pull trailer. This intelligent electric RV lock offers multiple unlocking methods and is constructed with durable materials to withstand various conditions. This manual will guide you through the installation, operation, and maintenance of your new RV door lock.
2. Key Features
- Multiple Unlocking Methods: Unlock your RV door using a mechanical key, NFC key, key fob, or a personalized password.
- Enhanced Security: Constructed with heavy-duty steel and zinc alloy, featuring IK10 Impact Protection, IP65 Waterproof rating, and V2 Flame Retardancy.
- Strong Password Combinations: A 10-digit keypad allows for more complex and secure password settings.
- Sleep Mode: Activate a silent mode by long-pressing the '0' button to prevent button or unlocking noises.
- Intuitive Indicators: 3-color LED indicators (Green, Yellow, Red) provide clear status updates for unlocking, low battery, and incorrect password entry.
- Long Standby Time: Approximately 300 days of standby time ensures extended battery life.

3. Package Contents
Please check the package to ensure all items are present:
- Door Lock x1
- Key Fob x1
- NFC Key Card x1
- NFC Key Sticker x2
- Mechanical Key x4
- AA Battery x4
- Set of Mounting Hardware (Jamb Plate x1, Striker Plate x1, Screwdriver x1, Needle x1, Screws x6)
- User Manual x1

4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | MICTUNING |
| Model | RL100 |
| Opening Size (Cutout) | 3.75" x 2.75" x 1.5" |
| Waterproof Rating | IP65 |
| Material | Heavy-duty steel & zinc alloy |
| Impact Protection | IK10 |
| Flame Retardancy | V2 |
| Keypad Digits | 10 |
| Key Fob Sensing Range | Up to 50ft (under ideal conditions) |
| Standby Time | Approx. 300 days |
| Power Source | 4x AA Batteries |
| Exterior Dimensions (W x H) | 6.29" x 4.64" |
| Interior Dimensions (W x H) | 5.82" x 2.2" |
| Latch Dimensions (W x L x H x T) | 1.18" x 2.55" x 1.37" x 0.74" |

5. Setup and Installation
5.1 Compatibility Check
Before installation, ensure your RV door meets the following requirements:
- Opening Size: Must be 3.75" x 2.75" x 1.5".
- Hinge Side: Only fits doors with hinges on the RIGHT SIDE.
5.2 Battery Installation
- Remove the battery cover on the interior door handle.
- Insert 4 AA batteries, ensuring correct polarity.
- Replace the battery cover and secure it with the provided screws.
5.3 Initial Programming
Refer to the included User Manual for detailed instructions on setting your initial password, programming NFC cards/stickers, and pairing the key fob. This typically involves using the 'code reset' and 'fob learn' buttons located on the interior unit.
5.4 Installation Steps
The installation process involves replacing your existing RV door lock with the MICTUNING RL100. Use the provided mounting hardware and screwdriver. Ensure the exterior and interior door handles are correctly aligned and secured, and that the upper and lower deadbolt latches operate smoothly.
6. Operating Instructions
6.1 Unlocking Methods
- Password: Enter your programmed 10-digit password on the keypad.
- NFC Key Card: Swipe the NFC Key Card over the sensing area on the lock.
- NFC Stickers: Attach the NFC stickers to your phone, wallet, or other accessories and approach the sensing area to unlock.
- Mechanical Key: Use one of the four provided mechanical keys in the keyhole. Keep these keys safe as replacements cannot be provided.
- Key Fob: Press the unlock button on the key fob. The key fob has a sensing range of up to 50ft under ideal conditions.



6.2 Sleep Mode
To activate Sleep Mode and silence button/unlocking noises, long-press the '0' button on the keypad. To deactivate Sleep Mode and restore normal operation, long-press the '0' button again.

6.3 Indicator Lights
- Green Light: Confirms successful unlocking or correct password entry.
- Yellow Light: Indicates low battery power.
- Red Light: Alerts you to an incorrect password entry.

7. Maintenance
7.1 Battery Replacement
When the yellow indicator light flashes, it's time to replace the batteries. Use 4 new AA batteries. Follow the battery installation steps in Section 5.2.
7.2 General Care
Clean the lock's exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components. Ensure the keypad and sensing areas are kept clear of debris.
8. Troubleshooting
- Lock not responding: Check battery level (yellow indicator). Replace batteries if low.
- Incorrect password (red light): Re-enter the password carefully. Ensure no buttons are stuck.
- Key fob not working: Ensure you are within the 50ft range. Check the key fob's battery. Re-pair the key fob if necessary (refer to the full user manual for pairing instructions).
- NFC not working: Ensure the NFC card/sticker is correctly placed over the sensing area. Check for any interference.
- Mechanical key not working: Ensure the key is fully inserted and turned correctly. Do not force the key.
9. User Tips
- Always keep at least one mechanical key in a secure, accessible location outside your RV in case of battery failure or electronic malfunction.
- Regularly check the battery status, especially before long trips, to avoid being locked out.
- When programming new passwords or key fobs, perform a test unlock/lock cycle to confirm functionality.
- Utilize the NFC stickers by attaching them to frequently used items like your phone or wallet for quick and convenient access.
10. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the contact details provided with your purchase or visit the official MICTUNING website. Keep your purchase receipt as proof of purchase for warranty claims.