ANDELI TIG-205PRO

Contents

ANDELI TIG-205 Pro AC/DC MultiProcess Welding Machine User Manual

1. Introduction

Welcome to the ANDELI TIG-205 Pro AC/DC MultiProcess Welding Machine user manual. This advanced inverter welder is designed for a wide range of welding applications, offering versatility and precision for both professional and hobbyist use. It combines multiple welding functions including AC+DC TIG, Stick (MMA), DC TIG, DC PULSE TIG, AC TIG, AC PULSE TIG, Lift TIG, AC Cold welding, DC Cold welding, and Spot Welding. This manual provides essential information for safe operation, setup, and maintenance of your welding machine.

2. Safety Information

Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death.

General Safety Precautions:

  • Always wear appropriate Personal Protective Equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation in your work area to avoid inhaling welding fumes.
  • Keep a fire extinguisher nearby and be aware of fire hazards.
  • Avoid electrical shock by ensuring all connections are secure and the machine is properly grounded. Do not operate in wet conditions.
  • Read and understand all instructions before operating the machine.

Built-in Safety Features:

The ANDELI TIG-205 Pro is equipped with multiple protection mechanisms to ensure safe operation:

  • Overvoltage Protection: Safeguards against excessive input voltage.
  • Overheat Protection: Prevents damage from prolonged high-temperature operation.
  • Overload Protection: Protects the machine from drawing too much current.
  • Overcurrent Protection: Shuts down the machine if current exceeds safe limits.
Safety and Reliability features of the ANDELI TIG-205 Pro welder, showing internal components and protection icons for overvoltage, overheat, overload, and overcurrent.
Figure 2.1: Safety and Reliability features, including internal cooling and protection circuits.

3. Package Contents

Upon unpacking your ANDELI TIG-205 Pro, please verify that all the following items are included:

Diagram showing all items included in the ANDELI TIG-205 Pro package.
Figure 3.1: Package Contents Overview.
  1. TIG-205 PRO ACDC Welding Machine
  2. 2-Pin Control Pedal
  3. 5-Pin Foot Pedal
  4. WP-26 Ceramic Nozzles
  5. WP-9 Ceramic Nozzles
  6. Collet
  7. TIG Electrodes
  8. Adapter plug
  9. WP-9 TIG Torch
  10. WP-26 TIG Torch
  11. Ground Clamp
  12. Air Hose

Note: The foot pedal is included with no extra cost. Cold welding helmet is sold separately.

Welder operating the ANDELI TIG-205 Pro with a foot pedal, highlighting triple hands-free welding controls.
Figure 3.2: Triple Hands-Free Welding Controls, including the foot pedal.

4. Specifications

The following table details the technical specifications of the ANDELI TIG-205 Pro AC/DC MultiProcess Welding Machine:

Detailed table of technical parameters for the TIG-205PRO ACDC welding machine.
Figure 4.1: Technical Parameters Table.
ParameterValue (TIG-205PRO ACDC)
Input Power1*220V±10%, 50Hz
Rated Input Current (TIG)37 A
Rated Input Current (MMA)45 A (TIG), 48 A (MMA)
Rated Input Power (TIG)8.2 KW
Rated Input Power (MMA)10 KW (TIG), 5.3 KW (MMA)
Power Factor0.73
Max No-Load Voltage (V)68 V
Adjustment Range of Start Current (A)10 - 200 A (TIG/LIFT/MMA)
Adjustment Range of Welding Current (A)10 - 200 A (TIG/LIFT/MMA)
Adjustment Range of Downslope Time (S)0 - 5 S
Pre-Gas Time (S)0 - 1 S
Adjustment Range of Post-Gas Time (S)0.1 - 10 S
Clearance Effect (%)20 - 80 % (AC/DC)
Duty Cycle (AC/DC)30% 200A, 40% 145A/120A, 60% 115A/118A, 100% 89A/92A
Insulation ClassH
Protection ClassIP21S
Dimensions (L*W*H)485mm x 210mm x 340mm
Weight12.5 kg

5. Setup

Before operating the welding machine, ensure proper setup for safety and optimal performance.

5.1 Power Connection

  • Connect the welding machine to a stable 1*220V±10%, 50Hz power supply. Ensure the power outlet is properly grounded and can handle the machine's rated input current.

5.2 Gas Connection

  • For TIG and Cold welding, connect the air hose to a pure argon gas cylinder. Ensure all gas connections are tight to prevent leaks.

5.3 Torch and Ground Clamp Connection

  • Connect the TIG torch (WP-9 or WP-26) to the appropriate port on the front panel.
  • Connect the ground clamp to the workpiece, ensuring a clean, secure electrical contact.

5.4 Control Device Connection

  • Connect either the 2-Pin Control Pedal or the 5-Pin Foot Pedal to the corresponding port on the machine, depending on your preferred control method.

5.5 Initial Power On

  • Once all connections are secure, turn on the main power switch. The digital display will show "System Loading..." as the machine initializes.
ANDELI TIG-205 Pro welding machine with all accessories laid out, including torches, ground clamp, and foot pedal.
Figure 5.1: Welding Machine and Accessories.

6. Operating Modes and Controls

The ANDELI TIG-205 Pro features a user-friendly 4.3-inch LCD display and intuitive controls for selecting and adjusting welding parameters.

Comparison of the 4.3-inch larger LCD display of the TIG-205 Pro with a smaller, less informative display.
Figure 6.1: 4.3-inch Larger LCD Display for accurate welding results.
Close-up of the digital display screen showing welding parameters like voltage, amperage, and waveform settings.
Figure 6.2: Digital Display Screen with graphical interface.

6.1 Mode Selection

Rotate and press the control knobs on the front panel to navigate through the menu and select your desired welding mode. The machine supports:

  • HF TIG AC: High-Frequency AC TIG welding, ideal for aluminum.
  • HF TIG DC: High-Frequency DC TIG welding, suitable for stainless steel, carbon steel, and titanium.
  • Cold Weld AC: AC Cold welding mode.
  • MMA DC: DC Stick (MMA) welding mode.
  • DC Lift TIG: DC TIG welding with lift arc ignition.
  • AC Lift TIG: AC TIG welding with lift arc ignition.
  • AC Pulse TIG: AC TIG with pulse function.
  • DC Pulse TIG: DC TIG with pulse function.
  • Spot Welding: For precise spot welds.
Image displaying the 10-in-1 AC DC Aluminum TIG Welder modes, including AC Pulse TIG, DC Pulse TIG, AC TIG, DC TIG, AC Cold, DC Cold, Lift TIG, AC+DC, Spot, and Stick.
Figure 6.3: Overview of 10-in-1 Welding Modes.

6.2 TIG Welding (AC/DC)

The TIG-205 Pro offers both AC and DC TIG welding capabilities for various materials.

  • AC TIG for Aluminum: Suitable for welding aluminum with thicknesses ranging from 0.8mm to 6mm.
  • DC TIG for Steel: Ideal for welding stainless steel, carbon steel, titanium, copper, and magnesium alloy with thicknesses from 0.8mm to 8mm.
Examples of excellent welding effects for DC Pulse TIG, AC Pulse TIG, AC Cold, DC Cold, and MMA welding.
Figure 6.4: Examples of Excellent Welding Effects.

6.3 Pulse TIG

The Pulse TIG function allows for precise heat control, reducing distortion and preventing burn-through on thin materials. It also improves weld pool fluidity control.

  • Pulse ON: Activates the pulse function for precise heat control.
  • Pulse OFF: Provides simpler operation and faster travel speeds for thicker materials or when maximum arc force is needed.
Explanation of Pulse TIG function, showing benefits of Pulse ON for precise heat control and Pulse OFF for faster travel speeds.
Figure 6.5: Pulse TIG Functionality.

6.4 Cold Welding

Cold welding mode is designed to reduce deformation and discoloration, resulting in silver-white welds on materials like aluminum and stainless steel. Pure argon gas is required for optimal results in this mode.

Description of Cold Welding Machine capabilities, highlighting reduced deformation and discoloration for aluminum and stainless steel.
Figure 6.6: Cold Welding Machine benefits.

6.5 MMA (Stick) Welding

The machine supports MMA (Stick) welding, capable of handling 3.2mm welding rods for extended periods.

6.6 2T/4T Settings

Select between 2T (Manual) and 4T (Automatic) modes based on your welding task:

  • 2T (Manual): Perfect for household welding tasks and hobby welders. Press the torch trigger to weld and release to stop.
  • 4T (Automatic): Suitable for long runs and seasoned welders. Press and release the torch trigger to start, then press and release again to stop.
Explanation of 2T and 4T welding settings, detailing their use cases for manual and automatic operation.
Figure 6.7: 2T/4T Settings.

6.7 Parameter Settings

The digital display allows for precise adjustment of various welding parameters:

  • Pre-Gas: Time gas flows before arc ignition.
  • Start Current: Initial current for arc ignition.
  • Upslope: Time taken for current to rise from start to peak.
  • Peak Current: Maximum welding current.
  • AC Frequency: Frequency of the AC waveform (for AC TIG).
  • Balance: Controls the cleaning action and penetration in AC TIG.
  • Downslope: Time taken for current to fall from peak to stop.
  • Stop Current: Final current before arc extinction.
  • Post-Gas: Time gas flows after arc extinction to protect the weld pool.
Professional Parameter Settings on the LCD, showing adjustments for duty cycle, amperage, and pulse frequency.
Figure 6.8: Professional Parameter Settings Interface.
Specific parameter settings for Cold Welding (Stainless Steel 1mm) and TIG AC (Aluminum 5mm).
Figure 6.9: Example Parameter Settings for Cold Welding and Aluminum Welding.

6.8 AC Waveforms

The machine offers several AC waveform types to optimize welding for different materials and applications:

  • Trapezoidal Wave: Ideal for welding thin plates, providing low heat output and rapid prototyping.
  • Square Wave: Offers a stable dynamic arc, forming a stable molten pool for high stability welding operations.
  • Sine Wave: Suitable for various traditional applications with lower noise decibels.
Diagram illustrating different AC waveform types: Trapezoidal, Square, and Sine, with their respective applications.
Figure 6.10: Several Types of AC Waveforms.

6.9 Memory Function

The powerful memory function allows you to save up to 10 presets, ensuring welding consistency across repetitive tasks or different materials.

Powerful Memory Function interface on the welder's display, showing options to save and recall up to 10 job presets.
Figure 6.11: Powerful Memory Function.

6.10 Weldable Materials

The ANDELI TIG-205 Pro is compatible with a wide range of materials:

  • Aluminum
  • Magnesium Alloy
  • Titanium
  • Square Tube
  • Copper
  • Carbon Steel
  • Stainless Steel
Image showing various weldable materials compatibility: Aluminum, Magnesium Alloy, Titanium, Square Tube, Copper, Carbon Steel, Stainless Steel.
Figure 6.12: Widely Weldable Materials Compatibility.

6.11 Product Video

Video 6.1: Product demonstration showcasing various welding modes, display features, internal components, and welding results for aluminum, hot TIG, and MMA.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior and ensure the air vents are free from dust and debris. Use compressed air to gently clear internal components if accessible and safe to do so.
  • Connections: Regularly inspect all cables, torches, and ground clamps for signs of wear, damage, or loose connections. Replace any damaged components immediately.
  • Storage: Store the welding machine in a dry, dust-free environment when not in use. Protect it from extreme temperatures and humidity.

8. Troubleshooting

If you encounter issues with your welding machine, refer to the following common problems and solutions:

  • No Power: Check the power cable connection, ensure the main power switch is on, and verify that the circuit breaker has not tripped.
  • Poor Weld Quality:
    • Inconsistent Arc: Check gas flow, ensure the tungsten electrode is properly sharpened and free from contamination. Adjust welding parameters (current, pulse settings, AC balance).
    • Porosity: Verify gas shield coverage, check for gas leaks, ensure proper gas flow rate, and clean the workpiece thoroughly.
    • Excessive Spatter (MMA): Adjust welding current, ensure correct electrode type and size for the material.
  • Machine Overheating: The machine's overheat protection will activate. Allow the machine to cool down. Ensure adequate ventilation and that the duty cycle is not exceeded.
  • Display Errors: If the display shows unusual readings or error codes, power off the machine, wait a few minutes, and restart. If the issue persists, contact customer support.

9. User Tips

Enhance your welding experience with these helpful tips:

  • Cold Welding Argon: For achieving the desired silver-white welds on aluminum and stainless steel in cold welding mode, always use pure argon gas.
  • Beginner-Friendly Synergy: The machine's synergy support simplifies parameter setup, making it suitable for beginners to achieve good welding results.
  • Utilize Memory Presets: Save frequently used welding parameters for different materials or projects using the memory function. This saves time and ensures consistent weld quality.
  • Waveform Selection: Experiment with different AC waveforms (Trapezoidal, Square, Sine) to find the best fit for your specific material and desired weld characteristics. Trapezoidal is good for thin plates, Square for stability, and Sine for traditional applications.

10. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact ANDELI customer support. Refer to your purchase documentation for specific warranty terms and contact information.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.