SMAILWOLF RS7

Contents

Smailwolf RS7 Bluetooth Wireless Three-Mode Gaming Mouse

User Manual

1. Introduction

Thank you for choosing the Smailwolf RS7 E-sports Gaming Mouse. This high-performance mouse features three-mode connectivity (wired, 2.4G wireless, and Bluetooth), a flagship PAW3311 sensor, and a customizable macro driver, designed to enhance your gaming and office experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.

Smailwolf RS7 Pink Gaming Mouse with key features listed
The Smailwolf RS7 mouse in pink, highlighting its three-mode connectivity, PAW3311 chip, 20 million switches, 500mAh battery, and 1000Hz return rate.
Smailwolf RS7 Black Gaming Mouse with key features listed
The Smailwolf RS7 mouse in black, emphasizing the PAW3311 sensor, 20000 DPI, 1000Hz polling rate, and 20 million sub-micro-movements.

2. Setup and Connection

2.1 Unpacking and Initial Charge

Before first use, ensure all components are present: Smailwolf RS7 mouse, USB Type-C charging cable, and 2.4G USB receiver. It is recommended to fully charge the mouse using the provided Type-C cable before initial use.

2.2 Connection Modes

The Smailwolf RS7 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. The mode switch is located on the underside of the mouse.

Underside of Smailwolf RS7 mouse showing switches and USB receiver storage
Underside of the RS7 mouse, showing the Bluetooth switch (BT1/BT2), 2.4G wireless/On/Off/Bluetooth connection switch, and the USB receiver storage bin.
Diagram showing multi-system compatibility and connection instructions
Multi-system compatibility diagram with detailed instructions for wired, 2.4G wireless, and Bluetooth connections.

2.2.1 Wired Connection (Type-C)

  1. Connect the mouse to your computer using the included Type-C cable.
  2. Switch the power mode on the underside of the mouse to the 'Wired' position (usually 'Off' or center position, as the mouse will draw power from the cable).
  3. The mouse will be automatically recognized by your computer and ready for use.

2.2.2 2.4G Wireless Connection

  1. Take out the USB receiver from the storage bin on the underside of the mouse.
  2. Switch the power mode on the underside of the mouse to the '2.4G' position.
  3. Plug the USB receiver into an available USB port on your computer.
  4. When pairing is successful, the indicator light on the mouse will flash red and then turn off. The mouse is now ready for use.
  5. Troubleshooting Pairing (2.4G): If pairing fails, the mouse indicator light and receiver indicator light will flash red. Unplug and re-plug the USB receiver. If it still fails, press and hold the left button, middle button, and right button simultaneously for one second, then turn the mouse on. This should initiate pairing.

2.2.3 Bluetooth 5.1 Connection (BT1/BT2)

The RS7 supports dual Bluetooth devices (BT1 and BT2).

  1. Switch the power mode on the underside of the mouse to the 'BT' position (Bluetooth mode).
  2. The indicator light will flash green for BT1 or blue for BT2.
  3. Press and hold the '7' key (usually a side button or a dedicated Bluetooth pairing button) for about three seconds. The indicator light will flash quickly, indicating it has entered pairing mode.
  4. On your mobile phone, tablet, or other Bluetooth-enabled device, turn on Bluetooth, search for 'Smailwolf RS7' (or similar), and click to connect.
  5. When pairing is successful, the indicator light on the mouse will turn off, and the mouse can be used normally.
  6. Troubleshooting Pairing (Bluetooth): If pairing fails, press and hold the left button, middle button, and right button simultaneously for three seconds to re-enter pairing mode.
  7. To switch between BT1 and BT2, use the Bluetooth switch on the underside of the mouse.

3. Operation

3.1 DPI Adjustment

The Smailwolf RS7 features a six-speed DPI adjustment for precise positioning. The DPI can be cycled through preset values (e.g., 800, 1600, 2400, 3200, up to 20000 DPI) using the dedicated DPI adjustment button, typically located on the top of the mouse behind the scroll wheel.

Exploded view of Smailwolf RS7 mouse components
Exploded view showing internal components including the DPI adjustment button, micro-movement switches, 500mAh battery, and main control chip.

3.2 Buttons and Functions

The mouse is equipped with 6 programmable keys. The default functions include left click, right click, scroll wheel click, DPI adjustment, and two side buttons. These functions can be customized using the dedicated driver software.

3.3 Driver Software (RS7 Drive)

For full control over DPI adjustment, return rate, and key functions (including macro programming), download and install the exclusive RS7 Drive software. This application allows you to personalize your mouse settings to suit your preferences.

Laptop screen showing the RS7 Drive software interface
The RS7 Drive software interface, offering full control over DPI, return rate, and key functions.

3.4 Return Rate (Polling Rate)

The mouse supports a return rate of 125-1000 Hertz. This can typically be adjusted via the RS7 Drive software to match your gaming or work requirements.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the mouse surface. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the mouse. Avoid harsh chemicals.
  • Battery Care: To prolong battery life, avoid fully discharging the mouse frequently. Charge it when the battery indicator is low. If storing for an extended period, charge the mouse to about 50% and store it in a cool, dry place.
  • Storage: When not in use, especially during travel, store the USB receiver in its dedicated storage bin on the underside of the mouse to prevent loss.
  • Environmental Conditions: Avoid exposing the mouse to extreme temperatures, direct sunlight, or high humidity.

5. Troubleshooting

Mouse not responding:
  • Ensure the mouse is charged.
  • Check the connection mode switch (Wired, 2.4G, BT) is set correctly.
  • For 2.4G wireless, ensure the USB receiver is securely plugged in and try a different USB port. Re-pair if necessary (see 2.2.2).
  • For Bluetooth, ensure Bluetooth is enabled on your device and the mouse is paired (see 2.2.3). Try re-pairing.
  • If using wired mode, ensure the Type-C cable is securely connected.
Lag or intermittent connection:
  • Ensure the mouse is within the effective range (up to 10 meters for wireless/Bluetooth).
  • Reduce interference by moving away from other wireless devices or large metal objects.
  • Check battery level; low battery can affect performance.
  • Update mouse drivers or try a different USB port for the receiver.
DPI adjustment not working:
  • Ensure the mouse is powered on and connected.
  • If using custom settings, check the RS7 Drive software for any conflicts or incorrect configurations.

6. Specifications

Smailwolf RS7 Product Parameters table and dimensions
Product parameters and dimensions of the Smailwolf RS7 mouse.
Feature Specification
Model RS7
Mouse Type Wireless Three-Mode Gaming Mouse
Image Sensor Original image PAW3311 (Pixart 3311)
DPI Range 800-20000 DPI (Six-speed adjustment)
Moving Speed 650 IPS
Acceleration 50G
Return Rate (Polling Rate) 125-1000 Hertz
Number of Keys 6 keys
Connection Method Type-C Wired, 2.4G Wireless, Bluetooth 5.1
Transmission Distance 10 meters (wireless)
Battery Capacity 500mAh
Compatibility (2.4G Wireless) Windows XP/Vista, WIN7/WIN8/WIN10/WIN11
Compatibility (Bluetooth) Microsoft, MAC, Android
Dimensions 129 x 71 x 42 mm
Weight 89 ± 3 g
Operation Mode Opto-electronic
Number of Rollers 1 pcs
Power Source Battery

7. User Tips

  • Software Customization: For advanced settings like macro programming and fine-tuning DPI steps, make sure to download and install the official RS7 Drive software. This unlocks the full potential of your mouse.
  • Bluetooth Pairing: If you experience issues with Bluetooth pairing, try pressing and holding the left, middle, and right mouse buttons simultaneously for three seconds to force the mouse into pairing mode.
  • Multi-Device Use: Utilize the dual Bluetooth channels (BT1/BT2) to quickly switch between two different Bluetooth-enabled devices without re-pairing.

8. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.