Introduction
Thank you for choosing the CYCLAMI CYC1800 Wireless Remote Bike Headlight. This high-performance headlight is designed to provide superior illumination for road and mountain biking, featuring 1800 lumens brightness, a long-lasting 4000mAh battery, and convenient wireless remote control. This manual provides essential information for the safe and effective use of your new headlight.
Package Contents
Please check the package to ensure all items are present:
- CYCLAMI CYC1800 Headlight
- Wireless Remote Control
- Type-C USB Charging Cable
- Quick Release Lifting Head Mount

Specifications
| Feature | Specification |
|---|---|
| Model | CYC1800 |
| Brightness | 500-1800 Lumens |
| Battery | 4000 mAh Lithium Battery |
| Charging Port | Type-C USB |
| Runtime | 3.5 - 12 hours (depending on mode) |
| Waterproof Rating | IPX4 |
| Body Material | Aluminum Alloy + Nylon |
| Dimensions | 68 x 53 x 43.5 mm |
| Weight | Approximately 185g |
| Lighting Modes | Low, Medium, High, Ultra, Burst Flash, SOS Flash |
| Intelligent Sensing | Yes |

Lighting Mode Details
| Mode | Lumens | Lifetime | Range |
|---|---|---|---|
| Low | 500LM | 12h | 100m |
| Medium | 800LM | 9h | 150m |
| High | 1200LM | 6h | 180m |
| Ultra | 1800LM | 3.5h | 200m |
| Burst Flash | 1800LM | - | 200m |
| SOS Flash | 1800LM | - | 200m |

Setup and Installation
1. Mounting the Headlight
- Attach the Quick Release Lifting Head Mount to your bicycle's handlebar. Ensure it is securely fastened.
- Slide the CYC1800 Headlight onto the mount until it clicks into place. The GoPro sling mount interface allows for quick attachment and detachment without tools.

2. Mounting the Remote Control
Secure the wireless remote control to a convenient location on your handlebar using its integrated strap. Ensure it is within easy reach for operation during your ride.

3. Pairing the Remote Control
- Press and hold the ON/OFF switch on the headlight for 3 seconds.
- Observe the power indicator light on the headlight blinking slowly.
- Bring the remote control close to the headlight.
- Press any key on the remote control lightly to initiate pairing. The headlight's indicator will stop blinking once successfully paired.

Charging
The CYC1800 Headlight is equipped with a 4000mAh Lithium Battery and a Type-C charging port for fast charging.
- Connect the provided Type-C USB charging cable to the headlight's charging port.
- Connect the other end of the cable to a standard USB power adapter (not included) or a power bank.
- The battery indicator will show charging status.
- A full charge typically takes several hours.
Note: The charging head/adapter is not included in the package and needs to be purchased separately.

Operation
1. Power On/Off
- Press and hold the power button on the headlight unit or the ON/OFF button on the remote control to turn the light on or off.
2. Changing Modes
- Short press the power button on the headlight unit or the MODE button on the remote control to cycle through the different lighting modes (Low, Medium, High, Ultra, Burst Flash, SOS Flash).
3. Memory Function
The CYC1800 Headlight features a memory function that automatically retains the last used light pattern (mode and brightness) when it was turned off. When you power it on again, it will resume the previous setting.

Maintenance
1. Waterproofing
The headlight has an IPX4 waterproof rating, making it resistant to splashes from any direction. For optimal waterproof performance, ensure the silicone plug for the charging port is completely sealed after charging.

2. Cleaning
Wipe the headlight and remote control with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components.
3. Storage
When not in use for extended periods, store the headlight in a cool, dry place. It is recommended to charge the battery to about 50% before long-term storage and recharge it every 3-6 months to maintain battery health.
Troubleshooting
- Light not turning on: Ensure the battery is charged. If using the remote, ensure it is paired correctly.
- Remote control not working: Re-pair the remote control following the instructions in the 'Setup and Installation' section. Check if the remote's battery needs replacement (if applicable).
- Reduced brightness or short runtime: The battery may be low or nearing the end of its lifespan. Ensure the headlight is fully charged before use.
- Water ingress: Ensure the Type-C charging port's silicone cover is fully sealed after charging to maintain IPX4 water resistance.
User Tips
- Use while charging: The headlight can be operated while connected to a power bank for extended runtime, making it suitable for very long rides.
- Manual operation: The headlight can be fully operated using the button on the unit itself, even without the remote control.
- Extension Bracket: Consider purchasing an optional multi-function extension bracket for more mounting options, including compatibility with GoPro adapters for action cameras or other accessories.

Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.
Additional Resources
A detailed user manual in PDF format may be available for download. Please check the product page or contact customer support for access to the User Manual (PDF).