1. Introduction
Thank you for choosing the YUER LED Beam Spot Moving Head Stage Light. This manual provides essential information regarding product use, installation, and maintenance. Please read these instructions carefully before installation and operation, and retain this manual for future reference. The product's performance is verified and packaging is complete upon leaving the factory. Adherence to all warnings and operating instructions is crucial. Damages resulting from misuse are not covered by the manufacturer's guarantee. This manual is subject to technical changes without prior notice.
2. Safety Instructions
- Always ensure the power cord is in good condition and properly connected.
- Verify that the power fuse is intact before operation.
- Ensure the switching power supply has the correct voltage output.
- Check the motherboard for proper voltage input.
- Avoid blocking the fan or fan net to prevent overheating.
- Do not operate the device if the LED light of the switching voltage output port is flashing.
- Ensure all DMX connections are secure and the DMX cannon seat is undamaged.
- Keep internal and external optical systems clean for optimal performance.
- This product is designed for IP20 indoor use only.
3. Product Characteristics and Specifications
General Characteristics:
| Feature | Description |
|---|---|
| Operating Voltage | AC100~240V, 50~60Hz |
| Consumed Power | 250W |
| Light Source | 200W white light + 21PCS SMD |
| Life of Light Source | ≥ 20,000 hours |
| Color Wheel | 7 colors + white light |
| Pattern Disk | 11 patterns + circular patterns |
| Prism | 18 prism effect |
| Rainbow | 6 colors rainbow effect |
| Aiming | Linear dimming, brightness 0 ~ 100% adjustable. |
| Stroboscopic | 1 ~ 20 Hz strobe per second, with adjustable strobe speed. |
| Level Position (Pan) | 0~540° |
| Vertical Position (Tilt) | 0~200° |
| Spin Velocity | Adjustable speed |
| Channel Mode | 13/15 international standard channels |
| Display Screen | Digital display LCD display |
| Control Model | DMX control, Master/Slave synchronous mode, Self-propelled control, Voice control, Remote control, APP control |
| Lamp Color | Black (white) |
| DMX Connection | DMX Canon Block (Network Port) |
| IP Level | IP20 indoor use |
| Is Bulbs Included | No |
| Power Source | DC |
| Luminous Flux | <60 |
| High-concerned chemical | None |
| Installation Method | Self-contained |
| Certification | CE |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
Model-Specific Parameters:
| Parameter | 200W Model | 180W Model |
|---|---|---|
| Power | 200W | 280W |
| Light Source | N/A (implied LED) | 1 x 200W white light bead + 21 SMD 5050 RGB |
| Pattern | 7 patterns + white light | 12-13 patterns |
| Color | 7 colors + white light | 8 colors |
| Rainbow Effect | N/A | 6-color rainbow effect |
| Prism | 18 prism | 6+12 prism |
| X-axis | 540° | 540° |
| Y-axis | 180° | 200° |
| Focus | Fixed focus | N/A |
| Product Size | 21.5x19x33.8cm | N/A |
| Net Weight | 4.3kg | N/A |
| Package Size | 27X27X37cm | N/A |
| Gross Weight | 5KG | N/A |
4. Setup
Before setting up, ensure the fixture is placed on a stable surface or securely mounted using appropriate rigging hardware. Connect the power cable to a compatible power outlet (AC100-240V, 50-60Hz).
DMX Connection:
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the DMX address is correctly set on each fixture (see "Display Screen Function" below).
5. Operating Instructions
Display Panel Controls:
| Button | Function |
|---|---|
| MENU | Enter the main page/menu or go to the next higher level. |
| UP | Navigate up / Increase value. |
| DOWN | Navigate down / Decrease value. |
| ENTER | Enter the selected function / Confirm selection. |
Display Screen Functions:
| Menu Item | Description |
|---|---|
| Set Up | Parameter setting |
| Manual | Manual setting |
| System | State monitoring, display |
| Senior | Advanced parameter configuration |
| Chinese-English Switching | Switch between Chinese and English display. |
| Inverted/Forward Display Switching | Forward/reverse display of display screen. |
| Reset | Device reset. |
| Operation Effect | SH0-SH5 (SH0 random effect) |
| Operational Mode | DMX, automatic, voice control |
| DMX Address | 001-512 |
| Channel Mode | Standard 13/15CH |
| Voice-activated Sensitivity | 0-100 |
| X Inversion | Off, on |
| Y Inversion | Off, on |
| XY Exchange | Off, on |
| No DMX Signal | Clear, keep |
| Constant On Time of Screen | Always on, 10S, 20S, 40S, 60S |
| Screen Intensity | 20%, 40%, 60%, 80%, 100% |
| Restore Default Settings | Confirm, cancel |
| X (Manual) | 000-255 |
| X Fine Tuning (Manual) | 000-255 |
| Y (Manual) | 000-255 |
| Y Fine Tuning (Manual) | 000-255 |
| XY Speed (Manual) | 000-255 |
| Aiming (Manual) | 000-255 |
| Stroboscopic (Manual) | 000-255 |
| Color Wheel (Manual) | 000-255 |
| Pattern Disk (Manual) | 000-255 |
| Prism, Rotating (Manual) | 000-255 |
| Rainbow (Manual) | 000-255 |
| Self-propelled/Voice Control (Manual) | 000-255 |
| Reset (Manual) | 000-255 |
| Lamp Strip (Manual) | 000-255 |
| Speed of Light Strip (Manual) | 000-255 |
| DMX Channel Detection (System) | X |
| System Error Record | Error logging |
| LED Temperature | Temperature display |
| DP / MT | Version number |
| Enter Password (Senior) | Up, down, up and down. |
| Sensor Monitoring (Senior) | X-axis hall state, Y-axis hall state, Hall state of color wheel, Hall state of pattern disk, Prism hall state, Rainbow hall state |
| Reset Calibration (Senior) | X-axis calibration 000-255, Y-axis calibration 000-255, Color wheel calibration 000-255, Pattern disk calibration 000-255, Prism calibration 000-255, Rainbow calibration 000-255 |
| Color Zero Calibration of LED (Senior) | On/off |
| Maximum Power of LED (Senior) | 000-255 (keep factory settings) |
| Maximum Temperature of LED (Senior) | 50-80 (keep factory settings) |
| Rainbow Stroke (Senior) | 000-255 (keep factory settings) |
Light Effects Demonstration:
6. DMX Channel Control (13/15-Channel Mode)
This section details the DMX512 international standard signal control for the 13/15-channel mode.
| Channel | Function | Numerical Value | Functional Description |
|---|---|---|---|
| 1 | X axis | 000-255 | The horizontal shaft runs 0-540 degrees. |
| 2 | X axis fine tuning | 000-255 | Horizontal fine-tuning fretting. |
| 3 | Y axis | 000-255 | The vertical axis runs 0-200 degrees. |
| 4 | Y axis fine tuning | 000-255 | Vertical fine-tuning fretting. |
| 5 | XY speed | 000-255 | Horizontal/vertical speed from fast to slow. |
| 6 | Total dimming | 000-255 | Linear dimming, brightness 0-100%. |
| 7 | Turn on/strobe | 000-009 | Closed light. |
| 010-249 | The strobe speed is from slow to fast, 1-20Hz. | ||
| 250-255 | Consecrate. | ||
| 8 | Color | 000-009 | White light. |
| 010-079 | Colors 1-7. | ||
| 080-139 | Half color effect 1-6. | ||
| 140-197 | The color wheel rotates forward, and the speed is fast to slow. | ||
| 198-255 | The color wheel is reversed and the speed is slow to fast. | ||
| 9 | Pattern | 000-005 | Circular white light. |
| 006-071 | Patterns 1-11. | ||
| 072-143 | Pattern 11-1 dithers, and the speed changes from slow to fast. | ||
| 144-199 | The pattern rotates forward, and the speed is from fast to slow. | ||
| 200-255 | The pattern rotates in reverse, and the speed changes from slow to fast. | ||
| 10 | Prism | 000-099 | Prism off. |
| 100-127 | 18 prism open. | ||
| 128-255 | The prism rotates 360, and the speed changes from slow to fast. | ||
| 11 | Colorful | 000-126 | Colorful closing. |
| 127-255 | Colorful open. | ||
| 12 | Self-propelled/Voice Control | 000-029 | 1-11 channels are valid. |
| 030-059 | Self-propelled mode 1. | ||
| 060-089 | Self-propelled mode 2. | ||
| 090-119 | Self-propelled mode 3. | ||
| 120-149 | Self-propelled mode 4. | ||
| 150-179 | Voice control mode 1. | ||
| 180-209 | Voice control mode 2. | ||
| 210-239 | Voice control mode 3. | ||
| 240-255 | Voice control mode 4. | ||
| 13 | Reset | 000-020 | No function. |
| 021-100 | Automatic detection of X-axis. | ||
| 101-200 | Y-axis automatic detection. | ||
| 201-249 | XY axis automatic detection. | ||
| 250-255 | Wait for 3 seconds, and the lamps will be reset. | ||
| 14 | Light Strip Scene | 000-004 | Light strip off. |
| 005-074 | Color selection of light strip. | ||
| 075-248 | Selection of light strip effect. | ||
| 249-255 | Random effect of light strip. | ||
| 15 | Scene Speed | 000-255 | Speed from fast to slow (valid at 14: 075-248). |
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your YUER Moving Head Light.
- Cleaning: Periodically clean the internal and external optical systems to prevent dust and debris buildup, which can affect light output and clarity. Use a soft, lint-free cloth and appropriate cleaning solutions for optical components.
- Fan and Ventilation: Ensure the cooling fan and ventilation grilles are free from dust and obstructions. Blocked fans can lead to overheating and potential damage.
- Cable Inspection: Regularly check all power and DMX cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical hazards and signal loss.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your device has the latest features and bug fixes.
8. Troubleshooting
If you encounter issues with your YUER Moving Head Light, refer to the following table for common problems and solutions:
| Problem | Possible Cause & Solution |
|---|---|
| Lamps can't start normally. |
|
| Lamps emit light normally, but are not controlled by DMX controller. |
|
| Lamps work intermittently. |
|
| The LED is not on. |
|
| The light is dim and the brightness drops obviously. |
|
| The shaking light is out of step. |
|
9. User Tips
- For optimal performance, ensure proper ventilation around the fixture during operation.
- When using DMX control, always verify the DMX address settings for each light to avoid conflicts.
- Experiment with different DMX channel values for patterns and colors to discover the full range of effects.
10. Warranty and Support
All YUER products come with a 1-3 year quality warranty. For any quality issues or technical support, please contact the seller directly. Our professional engineers are dedicated to providing excellent after-sales service.
For additional guides and documents, you may refer to the User Manual (PDF).