1. Introduction
This manual provides detailed instructions for the ASYPDZSW PASS ACA Stereo single-Ended Class A FET+MOS power amplifier. Designed for high-fidelity audio reproduction, this amplifier delivers 5W+5W of pure Class A power. Please read this manual thoroughly before operating the device to ensure proper use and optimal performance.

2. Features
- Dual Independent Channel Structure: Optimized power supply with array-type large filtering capacitors for superior sound.
- Classic PASS Design: Features a new design style inspired by original PASS aesthetics.
- OCL Structure Output: Designed for operation without the need for a protection circuit.
- Advanced Componentry: Utilizes 2SK170 + ZTX450 FET input and MOS precision pairing IRFP240 tube output, following a classic PASS two-stage structure.
- High-Fidelity Configuration: Equipped with fever-grade components for a true HIFI audio experience.
- Modular Design: Compact and efficient MINI modular construction.
- Precision Matched Tubes: All original new tubes are used, with the end tube featuring 1A quiescent current precision pairing VGS.
- Optimized Magnification: Offers 6.5 times magnification, making it suitable for desktop speakers.
- Enhanced Low Frequency: Input uses Nichicon MUSE BP coupling capacitors for flexible low frequency response, with output coupling capacitance increased to 3300uF for improved low frequency quality.
- Balanced Sound: Incorporates ELNA RA3 school sound capacitors for a round and full audio output.
3. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 115V / 230V (Optional) |
| Output Power | 5W + 5W (Single-Ended Class A) |
| Dimensions (W*H*D) | 212mm * 75mm * 287mm |
| Gain | 6.5 times |
| Channels | 2 (2.0) |
| Maximum Power Per Channel | 6W |
| Package | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
| Certification | NONE |
| Packaging Weight | Approximately 4.6KG |
4. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- Finished ASYPDZSW PASS ACA Class A FET+MOS Power Amplifier: 1 unit
Note: Connection cables (e.g., RCA cables, speaker wires, power cable) are not included and must be purchased separately.
5. Setup and Connections
Follow these steps to set up your ASYPDZSW PASS ACA amplifier:
- Placement: Place the amplifier on a stable, flat surface with adequate ventilation. Ensure there is enough space around the unit for heat dissipation, especially around the heatsinks.
- Voltage Selection: Verify the input voltage switch on the rear panel matches your local power supply (AC 115V or AC 230V). Adjust if necessary.
- Audio Input Connection: Connect your audio source (e.g., CD player, DAC, preamplifier) to the RCA input terminals on the rear of the amplifier using high-quality RCA cables.
- Speaker Output Connection: Connect your speakers to the speaker output terminals. Ensure correct polarity (+ to + and - to -) for both channels. Use appropriate gauge speaker wire for optimal sound quality.
- Power Connection: Connect the power cable to the amplifier's AC inlet and then to a suitable wall outlet.


6. Operation
- Power On: After all connections are secure, flip the power switch on the rear panel to the 'ON' position. The front panel indicator light should illuminate.
- Volume Control: Ensure the volume on your audio source or preamplifier is set to a low level before playing audio.
- Audio Playback: Start playing audio from your source. Gradually increase the volume to your desired listening level.
- Power Off: When finished listening, turn off the amplifier using the power switch.
7. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the amplifier. Do not use liquid cleaners or abrasive materials.
- Ventilation: Ensure that the ventilation openings are not blocked. Proper airflow is crucial for preventing overheating.
- Avoid Moisture: Keep the amplifier away from water, humidity, and direct sunlight.
- Component Longevity: The amplifier uses high-quality components. Avoid frequent power cycling and extreme operating conditions to prolong component life.



8. Troubleshooting
If you encounter issues with your amplifier, refer to the following common problems and solutions:
- No Power:
- Check if the power cable is securely connected to both the amplifier and the wall outlet.
- Ensure the power switch on the rear panel is in the 'ON' position.
- Verify the wall outlet is functioning by plugging in another device.
- No Sound:
- Confirm that your audio source is playing and its volume is turned up.
- Check all RCA input and speaker output connections for proper seating and polarity.
- Ensure the correct input is selected on your preamplifier (if used).
- Verify that the speakers are functioning correctly.
- Distorted Sound:
- Reduce the volume level from your audio source or preamplifier.
- Check for loose or damaged cables.
- Ensure speakers are correctly matched to the amplifier's output capabilities.
- Overheating:
- Ensure adequate ventilation around the amplifier.
- Remove any obstructions from the heatsinks.
- Reduce listening volume if the amplifier is operating at very high levels for extended periods.
If the problem persists after trying these solutions, please contact customer support.
9. User Tips
- The PASS ACA amplifier is noted for its sound quality, often considered superior to some other Class A designs like the PASS ZEN for certain applications.
- Due to its 6.5x magnification and 5W+5W output, this amplifier is particularly well-suited for use as a headphone amplifier or a desktop amplifier integrated with small speakers (around 90dB sensitivity).
- It excels in reproducing genres such as vocals, pop music, and 'saliva songs', offering an enjoyable and characteristic sound profile.
- For genres requiring high power or dynamic range, such as large symphonies or complex string music, this amplifier's limited thrust may not be ideal.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.