Ourlife 300Mbps Wireless WiFi Repeater User Manual

1. Introduction

Thank you for choosing the Ourlife 300Mbps Wireless WiFi Repeater. This device is designed to extend the coverage of your existing 2.4Ghz wireless network, eliminating Wi-Fi dead zones and providing a stable internet connection throughout your home or office. With a wireless transmission rate of up to 300Mbps, it's ideal for home use, supporting various activities like online learning, browsing, working, and gaming across multiple devices.

Ourlife 300Mbps Wireless WiFi Repeater highlighting 300Mbps speed, 2.4Ghz frequency, network port, and strong wall penetration capabilities.

2. Safety Information

• Do not expose the device to water or moisture.
• Do not attempt to disassemble or repair the device yourself.
• Use only the power adapter provided or recommended by the manufacturer.
• Keep the device away from heat sources and direct sunlight.
• Ensure proper ventilation around the device to prevent overheating.

3. Package Contents

• Ourlife 300Mbps Wireless WiFi Repeater
• User Manual
• Ethernet Cable (may vary by package)

4. Product Overview

The Ourlife WiFi Repeater features a compact design with external antennas for enhanced signal reception and transmission. It includes a network port for wired connections and status lights to indicate its operational status.

4.1 Device Layout

Back view of the Ourlife WiFi Repeater, illustrating the network port and WPS button.

4.2 Status Lights

The repeater is equipped with 4 status lights, typically indicating:

• Power Indicator: On when the device is powered.
• Wi-Fi Signal Strength: Indicates the strength of the signal received from the main router.
• WPS Status: Flashes during WPS setup, solid when connected.
• LAN/WAN Activity: Flashes when data is being transmitted through the Ethernet port.

5. Specifications

6. Setup Guide

The Ourlife WiFi Repeater offers two main setup methods: WPS Quick Setup and Manual Setup via a web browser.

6.1 WPS Quick Setup (Recommended)

This method is the fastest way to set up your repeater if your main router supports WPS (Wi-Fi Protected Setup).

1. Power On: Plug the WiFi Repeater into an electrical outlet near your main router. Wait for the power indicator light to become stable.
2. Activate Router WPS: Press the WPS button on your main router. Refer to your router's manual for the exact location and timing.
3. Activate Repeater WPS: Within 2 minutes, press the WPS button on the Ourlife WiFi Repeater.
4. Wait for Connection: The WPS indicator on the repeater will flash and then become solid, indicating a successful connection. This process usually takes 1-2 minutes.

Note: Your host router's SSID and password must be the same as the router's default settings and should not contain special characters for WPS to function correctly.

Visual guide for WPS Quick Setup.

6.2 Manual Setup (Web Browser)

If your router does not support WPS or you prefer manual configuration:

1. Power On: Plug the WiFi Repeater into an electrical outlet.
2. Connect to Repeater: On your computer or mobile device, connect to the repeater's default Wi-Fi network (e.g., 'Ourlife_Repeater' or similar, usually found on a sticker on the device). No password is required initially.
3. Access Web Interface: Open a web browser and enter the default IP address (e.g., 192.168.1.254 or 192.168.0.254) or domain name (e.g., 'repeater.net') provided in the quick start guide or on the device sticker.
4. Log In: Enter the default username and password (usually 'admin' for both).
5. Select Repeater Mode: Follow the on-screen wizard to select 'Repeater Mode'.
6. Scan for Networks: The repeater will scan for available Wi-Fi networks. Select your main router's network (SSID) from the list.
7. Enter Password: Enter the Wi-Fi password for your main router's network.
8. Configure Repeater SSID (Optional): You can choose to keep the same SSID as your main router or create a new one for the extended network (e.g., 'YourNetwork_EXT').
9. Apply Settings: Save the settings and wait for the repeater to restart.
10. Relocate Repeater: Once configured, unplug the repeater and move it to a location halfway between your router and the Wi-Fi dead zone. Ensure the signal strength indicator shows a good connection to your main router.

7. Operating Modes

The Ourlife WiFi Repeater primarily operates in Repeater Mode, extending the range of your existing Wi-Fi network. It can also function as an Access Point (AP) Mode, converting a wired internet connection into a wireless one, or potentially a Router Mode (if 'With Modem Function: Yes' implies this, though typically not for a repeater).

7.1 Repeater Mode

In Repeater Mode, the device wirelessly connects to your existing router and broadcasts an extended Wi-Fi signal. This is the most common use case for eliminating Wi-Fi dead zones.

The repeater effectively covers signal dead zones in various areas of a home.

7.2 Access Point (AP) Mode

In AP Mode, the device connects to your router via an Ethernet cable and then broadcasts a new wireless network. This is useful for adding Wi-Fi capability to a wired network.

7.3 Broad Compatibility

The repeater is broadly compatible and can connect up to 30 devices simultaneously, including phones, smart TVs, tablets, computers, and other smart devices.

Broad compatibility for connecting multiple devices.

8. Maintenance

• Placement: For optimal performance, place the repeater in an open area, away from obstructions like thick walls, metal objects, and other electronic devices that may cause interference.
• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
• Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and security.
• Reset: If the device malfunctions, you can perform a factory reset by pressing and holding the reset button (usually a small pinhole) for about 5-10 seconds while the device is powered on. This will revert all settings to factory defaults.

9. Troubleshooting

• No Internet Access: Ensure the repeater is successfully connected to your main router. Check the signal strength indicator on the repeater. If the signal is weak, try relocating the repeater closer to the main router. Verify your main router has internet access.
• Slow Speed: Ensure the repeater is placed in an optimal location, not too far from the main router. Avoid placing it near sources of interference. Check for any bandwidth-intensive activities on your network.
• Cannot Connect to Repeater's Wi-Fi: Double-check the Wi-Fi password. If you changed the repeater's SSID, ensure you are connecting to the correct network name. Try restarting both the repeater and your device.
• WPS Setup Fails: Ensure your main router supports WPS and that you are pressing the WPS buttons on both devices within the specified time frame (usually 2 minutes). Avoid special characters in your router's SSID or password during WPS setup.
• Forgot Login Password for Web Interface: Perform a factory reset on the repeater. This will restore the default login credentials.

10. User Tips

• Optimal Placement: The ideal location for your repeater is halfway between your main router and the area where you need extended Wi-Fi coverage. This ensures it receives a strong signal from the router while still being able to broadcast effectively to the desired area.
• Avoid Interference: Keep the repeater away from large metal objects, microwave ovens, cordless phones, and Bluetooth devices, as these can interfere with the Wi-Fi signal.
• Regular Reboots: Occasionally rebooting your repeater (and main router) can help clear temporary glitches and improve performance.
• Security: Always use a strong, unique password for your Wi-Fi network to protect your privacy and prevent unauthorized access.

11. Warranty and Support

Ourlife products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Ourlife support website. Please retain your proof of purchase for warranty claims.