radtel RT-910B

Contents

Radtel RT-910B Multi-band Two-Way Radio Instruction Manual

Model: RT-910B | Brand: Radtel

1. Introduction

The Radtel RT-910B is a versatile 5W multi-band two-way radio designed for a wide range of communication needs. Featuring Bluetooth application programming, 960 programmable channels, AM/FM reception, and air band capabilities, this walkie-talkie offers robust performance and user-friendly operation. Its Type-C charging port and various advanced functions make it suitable for both professional and amateur radio enthusiasts.

Radtel RT-910B front view with key features
Figure 1: Radtel RT-910B Two-Way Radio with highlighted features.

2. Package Contents

Upon opening the package, ensure all the following items are present:

  • Radtel RT-910B Two-Way Radio Unit
  • Lithium Polymer Battery (1500mAh)
  • Antenna
  • Belt Clip
  • USB Type-C Charging Cable
  • Power Adapter (US/EU Plug Type, depending on selection)
  • User Manual (this document)
Video 1: Unboxing and initial assembly of the Radtel RT-910B, showing all included components.

3. Initial Setup

  1. Install the Battery: Align the battery with the contacts on the back of the radio and slide it into place until it clicks securely.
  2. Attach the Antenna: Screw the antenna clockwise onto the connector at the top of the radio until it is finger-tight. Do not overtighten.
  3. Charge the Battery: Before first use, fully charge the battery. Connect the Type-C charging cable to the radio and a power adapter, then plug the adapter into a power outlet. The charging indicator will show the charging status.
  4. Attach Belt Clip (Optional): Secure the belt clip to the back of the radio using the provided screws if desired.

4. Operating Instructions

4.1 Power On/Off and Volume Control

  • Power On: Rotate the power/volume knob clockwise until you hear a click and the display illuminates.
  • Power Off: Rotate the power/volume knob counter-clockwise until you hear a click.
  • Volume Adjustment: Rotate the power/volume knob to adjust the audio level.

4.2 Frequency and Channel Selection

  • VFO Mode (Frequency Mode): Allows direct frequency input. Use the keypad to enter desired frequencies.
  • MR Mode (Memory Channel Mode): Allows selection of pre-programmed channels. Use the UP/DOWN keys or the keypad to navigate through channels.
  • Switching Modes: Press the 'VFO/MR' button to toggle between VFO and MR modes.

4.3 Keypad Functions

The keypad provides direct access to various functions and frequency input:

  • Number Keys (0-9): Used for direct frequency input or selecting memory channels.
  • SCAN: Initiates frequency scanning.
  • STEP: Adjusts frequency step size in VFO mode.
  • PWR (Power): Toggles transmit power levels (High/Middle/Low).
  • SQL (Squelch): Adjusts squelch level.
  • TONE: Accesses tone settings (CTCSS/DCS).
  • FM: Activates FM radio reception (65-108MHz).
  • #: Special function key.

4.4 Special Features

  • Bluetooth APP Programming: Connect your radio to a smartphone (iOS or Android) via Bluetooth for easy programming of channels and settings. This feature is available on Bluetooth-only versions.
  • Bluetooth App Programming interface for iOS and Android
    Figure 2: Bluetooth Phone App Programming interface for convenient radio configuration.
  • Noise Reduction: Enhances audio clarity by reducing background noise.
  • NOAA Weather Alert: Provides alerts for severe weather conditions (where available).
  • Spectrum Analyzer: Allows examination of interference by scanning for strong signals occupying a frequency. Useful for compliance checks and optimizing antenna alignment.
  • Spectrum Analyzer display with interference examination and compliance checks
    Figure 3: Spectrum Analyzer display, showing frequency analysis for interference and compliance.
  • VOX Function (Voice Operated Exchange): Enables hands-free transmission, suitable for driving or operating machinery.
  • VOX Function explanation with hands-free use case
    Figure 4: VOX Function allows hands-free communication.
  • Wireless Copy Frequency: Facilitates quick search, match, and connect operations between two or more interphones.
  • One-Click Copy Frequency feature for quick radio pairing
    Figure 5: One-Click Copy Frequency for easy pairing.
  • Auto Power Save: Extends battery life by optimizing power consumption during standby.
  • Channel Grouping: Organize your 960 programmable channels into 64 independent zones with 15 independent channels each for efficient management.
  • 960 Programmable Channels with various application scenarios
    Figure 6: The RT-910B offers 960 programmable channels for diverse applications.

5. Bluetooth Application Programming

The Radtel RT-910B supports Bluetooth programming via a dedicated mobile application (available for iOS and Android). This allows for convenient management of channels, frequencies, and other radio settings directly from your smartphone.

  1. Ensure your RT-910B radio has the Bluetooth feature enabled (check radio settings or product variant).
  2. Download the official Radtel programming application from your device's app store.
  3. Turn on Bluetooth on your smartphone and the RT-910B radio.
  4. Open the application and follow the on-screen instructions to pair your radio.
  5. Once connected, you can read the radio's current configuration, modify channels, frequencies, and other parameters, and then write the new settings back to the radio.

6. Charging Instructions

The RT-910B features a convenient USB Type-C charging port. This allows for flexible charging options:

  • USB Wall Adapter: Use the provided power adapter and Type-C cable.
  • Vehicle Charging: Connect to a car charger with a Type-C port.
  • Power Bank: Charge on-the-go using a compatible power bank.
  • PC Charging: Connect to a computer's USB port.

Ensure the radio is turned off during charging for optimal battery life and safety. The charging indicator will typically show red while charging and turn green when fully charged.

USB Type-C Charging and Programming options
Figure 7: Various methods for USB Type-C charging and programming.

7. Specifications

FeatureSpecification
Brand Nameradtel
Model NumberRT-910B
Output Power (W)3W-5W (Switchable)
Battery Capacity (mAh)1500mAh
Waterproof / Water-ResistantNo
Battery IncludedYes
MaterialPlastic
Storage Channel960
Frequency Range45-59MHz FM TX/RX, 65-108MHz FM RX, 108-136MHz AM RX, 136-260MHz TX/RX, 260-299MHz RX only, 300-520MHz TX/RX
Dimensions13cm*6cm*5cm
Walkie Talkie TypePortable
DisplayYes
Maximum Range3km-5km
OriginMainland China

7.1 Sample Output Power by Frequency

Table of sample output power for various frequencies
Figure 8: Sample output power (in Watts) across different frequencies (in MHz).

8. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or abrasive cleaners.
  • Battery Care: Avoid fully discharging the battery regularly. Store the radio and battery in a cool, dry place when not in use for extended periods.
  • Antenna: Ensure the antenna is securely attached. Avoid bending or stressing the antenna, as this can affect performance.
  • Storage: When storing the radio for a long time, remove the battery.

9. Troubleshooting

  • Radio not turning on: Check if the battery is properly installed and charged.
  • No reception/Poor audio: Ensure the antenna is securely attached. Adjust the squelch level (SQL). Check if you are on the correct frequency or channel.
  • Cannot transmit: Verify the battery is charged. Ensure you are within the radio's transmit frequency range and power settings.
  • Difficulty with Bluetooth programming: Make sure Bluetooth is enabled on both the radio and your smartphone. Ensure the correct app is installed and updated.
  • Receiving on 75 MHz: The RT-910B is designed to receive FM signals in the 65-108MHz range, which includes 75 MHz. If signals are weak, check antenna connection, adjust squelch, or consider local interference.

10. User Tips

  • Optimize Squelch: Setting the squelch (SQL) too high can block weak but important signals. A middle value often provides the best balance between sensitivity and noise rejection.
  • Power Management: Utilize the 'SAVE' power-saving mode to extend battery life, especially during long periods of standby. Choose 'LOW' transmit power (TXP) when communicating over short distances to conserve power.
  • Frequency Step: When manually tuning frequencies, select a 'STEP' size that matches the common channel spacing in your area for easier navigation.
  • Bluetooth Programming: For advanced users or those who frequently change settings, using the Bluetooth app for programming can be significantly faster and more intuitive than manual keypad entry.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official Radtel website. Keep your purchase receipt as proof of purchase for warranty claims.

12. Safety Information

  • Do not operate the radio in explosive atmospheres (e.g., near flammable gas, dust particles, or metallic powders).
  • Do not modify the radio. Unauthorized modifications can void your warranty and violate regulations.
  • Keep the radio away from medical devices to avoid interference.
  • Use only approved batteries and chargers to prevent damage and ensure safety.
  • Do not expose the radio to extreme temperatures, direct sunlight, or excessive moisture.
  • Always ensure the antenna is properly connected before transmitting to prevent damage to the radio.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.