Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your HSmartcam Tuya 7-Inch Touch Monitor Video WiFi Intercom System. This system is designed for 2, 3, or 4 family apartments, offering secure and convenient communication with visitors, remote access control, and smart home integration via the Tuya or SmartLife app.
NOTE: When testing the doorbell, avoid testing the indoor unit and outdoor unit in the same space. This can cause harsh noise or a whistling sound due to microphone and speaker feedback.
Video: Overview of the HSmartcam Tuya Video Intercom System features.
Kit Contents
Please verify that all components are present in your package:

Image: Detailed product drawing with dimensions and a list of kit contents.
- Intercom panels (for 2, 3, or 4 families, depending on model)
- Family Nameplate & Pen
- Screws Kits
- RFID badges (5 per family)
- Wire Connectors
- Family Monitor(s)
- Family Bracket(s)
- 24V 1A power supply
- Power cable
- Family Test wire
- 3*2P wire

Image: All components of the HSmartcam intercom system laid out.
Setup and Installation
1. Component Overview

Image: Intercom panel and monitor component diagram with labels.
2. Physical Installation
The intercom panel should be installed at a height of 1.4 to 1.7 meters, avoiding direct sunlight and rain. Use the provided screws or tape to fix the intercom panel to the wall or door.
- Use drill bits to drill three holes or utilize existing doorbell holes.
- Separate the rain cover from the intercom panel.
- Write your name on the nameplate and insert it into the intercom panel.
- Fasten the rain cover to the wall.
- Align the intercom panel with the top of the rain cover.
- Fix the bottom case.
- Fix the wall bracket for the monitor to the wall with two screws.
- Connect the monitor to a 24V 1A plug-in adapter.
- Hang the monitor on the wall bracket.

Image: Step-by-step installation diagram for the intercom panel and monitor.
3. Wiring Instructions
Warning: To avoid interference and malfunction, do not pass the video doorphone wire through the same sheath as electrical wires. Do not double wires to increase wire size.
a. Connecting the Videophone (Monitor and Intercom Panel)
- Use 2 x 0.75 mm² wires for lengths up to 100 m, or 2 x 1.5 mm² wires for lengths up to 120 m.
- Wires must be in one continuous piece without terminal strips or similar connections to avoid signal alteration.
- Ensure wires are properly connected according to the wiring diagrams.
- Connect the 'Last' port of the monitor to the intercom panel.
- For multiple monitors, connect the 'Next' port of one monitor to the 'Last' port of the subsequent monitor.
b. Connecting an Electric Strike Plate or Lock
Important: The output of the intercom panel is designed to control a fail-secure electric strike plate or lock. The current controlling the electric strike plate or lock must not exceed 1.1 A. Connect the electric lock or strike plate directly to the Lock+ and Lock- terminals.

Image: Access Control Power Connection Diagram for locks and multiple monitors.
c. Connecting a Gate Motor Drive
- The intercom provides a dry contact (without power) to be connected to the push button control of the automatic opener.
- The type of command (complete opening, partial opening for a pedestrian) cannot be selected from the monitor; it depends on the input on the motor drive electronic card.
- The gate output does not provide feedback on whether the motor drive has executed the command correctly.

Image: Wiring diagram for connecting an electric strike plate or lock.

Image: 2-Wire Digital Video Intercom Kit connection diagram for multi-family homes.
4. Power Supply
The system includes a DC12V 3A power supply control box (Model K80) for uninterrupted power. This power supply is compatible with E/M locks, access controllers, exit push buttons, and RFID readers.

Image: DC12V 3A Power Supply Control Box (K80).
5. WiFi and App Connection
The monitor supports WiFi (2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac) for connection to your router. The indoor monitor and doorbell are connected via wires. The main monitor connects to the "Tuya" or "SmartLife" App.
- Download the "Tuya" or "SmartLife" app from your app store (Google Play or Apple App Store).
- Scan the QR code displayed on the monitor's menu to connect the app.
- Up to 20 app users can connect to the system, allowing remote communication, monitoring, and unlocking.

Image: Multiple users connected to the Tuya App for remote interaction.
Operating Instructions
1. Monitor Interface

Image: Monitor menu interface with status bar and function icons.
The 7-inch IPS touch screen provides a clear view and easy navigation. The main menu includes:
- Status bar: Displays WiFi connection, TF card status, human detection status, Do Not Disturb, and ringtone volume.
- Family Intercom: Call other monitors within the system.
- Live View: View the live feed from the outdoor doorbell.
- Playback: Review recorded videos or photos.
- Camera: Access connected ONVIF cameras.
- Settings: Configure various system parameters.
2. Answering Visitors and Unlocking
When a visitor presses the doorbell, your phone will receive a Tuya Smart APP notification. You can then see, hear, and communicate with the visitor. You can also remotely unlock the door or gate via your smartphone.

Image: Welcoming visitors via monitor and smartphone app.
3. Unlocking Methods
The system offers multiple unlocking methods:
- Monitor: Press the unlock button on the indoor monitor.
- RFID Card: Use the provided 13.56MHz RFID badges (up to 100 badges can be programmed).
- Mobile App: Remotely unlock via the Tuya or SmartLife app.

Image: Multiple unlocking methods available.
4. Intercom Between Monitors
Monitors within the same system can communicate with each other, allowing for internal calls between family members or apartments.

Image: Monitors intercom function, allowing communication between units.
5. Monitoring and Recording
- One-click Monitoring: Press the "Monitor" button on the indoor unit to view the outdoor doorbell camera feed at any time.
- Human Detection: The intercom panel features human detection. When triggered, it can automatically record videos or take snapshot pictures and save them to the monitor's micro SD card (TF Card not included).
- Motion Detection: The doorbell camera has smart motion detection, sending real-time alerts to your phone when someone approaches.
- Automatic Recording: When visitors press the doorbell or motion detection is triggered, the system automatically records videos or snapshots.

Image: Smart motion detection and automatic recording in action.
6. Language Settings
The monitor supports multiple languages, including English, Russian, French, Spanish, German, and Arabic. You can select your preferred language from the settings menu.

Image: Language selection screen on the monitor.
Maintenance
1. General Care
- The intercom panel features a weatherproof design, ensuring stable operation in various weather conditions (-30°C to +70°C). However, avoid direct exposure to harsh elements if possible.
- Regularly clean the camera lens and monitor screen with a soft, dry cloth to ensure clear visibility.

Image: Weatherproof design of the intercom panel.
2. Screen Saver and Display
The monitor features a screen saver that can display the time and weather. If the monitor is not operated for 1 minute, the time display may turn off to protect the screen and extend its lifespan.
3. Micro SD Card Management
The monitor supports a Micro SD card (Class 10, up to 512GB) for storing recordings. Ensure the SD card is properly inserted. You can manage the SD card (check remaining capacity, format) through the monitor's settings.
Troubleshooting
- Harsh Noise/Whistling Sound: This typically occurs when the indoor unit and outdoor unit are tested in the same space. Separate the units during testing to prevent microphone and speaker feedback.
- No Signal/Poor Video Quality: Ensure all wires are properly connected and are of the correct gauge (2 x 0.75 mm² up to 100m, 2 x 1.5 mm² up to 120m). Avoid running video wires in the same sheath as electrical wires and do not double wires.
- Monitor Not Displaying Time/Weather: The screen saver may turn off the display after 1 minute of inactivity to preserve screen life. Touch the screen to reactivate.
- Cannot Connect to WiFi: Ensure your router supports 2.4 GHz and 5 GHz bands. The monitor connects to both. Verify correct WiFi password entry.
- Cannot Connect ONVIF Camera: Ensure the ONVIF camera is on the same LAN as the monitor. The camera's resolution will be adjusted to 720P H.264 when connected. Access this setting via 'Setting' -> 'Camera' on the monitor.

Image: Camera settings for ONVIF camera search.
Specifications
Monitor Specifications
| Feature | Specification |
|---|---|
| Display Screen Size | 7 inches |
| Display Screen Type | Color Touch Screen, IPS |
| Resolution | 1024 x 600px |
| WiFi | 2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac |
| Micro SD Card Support | Class 10, up to 512GB (not included) |
| Current Consumption | 150mA |
| Power Consumption | 3.5W |
| Dimensions (H x W x D) | 118 x 186 x 18.5 mm |
| Answering Mode | Hands-free |
| Monitoring Time | Up to 30 minutes |
Intercom Panel Specifications
| Feature | Specification |
|---|---|
| Camera Sensor Type | CMOS Colour Sensor, 2 Mega pixels |
| Viewing Angle | Horizontal ~130° / Diagonal ~165° |
| Current Consumption | 220mA |
| Power Consumption | 5.5W |
| Infrared | IR CUT (4 IR LEDs) for night vision |
| Camera Features | Wide dynamic range, distortion correction |
| Human Detection | Yes, with motion zone setting |
| RFID | 13.56MHz, max 100 badges |
| Operating Temperature | -30°C to +70°C |
| Dimensions (H x W x D) | 149 x 60 x 36 mm |
| Waterproof | Yes |
Power Supply (K80) Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 110-240V (Worldwide voltage) |
| Input Frequency | 50-60Hz |
| Output Voltage | DC 12V/3A |
| Power | 36W |
| Adjustable Locking Delay | 0-15 seconds |
| Operating Temperature | -20°C to 65°C |
| Dimensions (L x W x H) | 120 x 95 x 38 mm |
User Tips
- Clear Installation: Pay close attention to the wiring diagrams and instructions for both the intercom panel and monitors. Ensure all connections are secure and correct to avoid issues.
- Remote Access: Utilize the Tuya or SmartLife app for convenient remote monitoring and unlocking, especially when away from home.
- RFID for Convenience: Program RFID cards for family members who may not use smartphones, such as children or the elderly, for easy access.
- Avoid Interference: Always route video doorphone wires separately from electrical wires to prevent signal interference.
Warranty and Support
For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact HSmartcam Official Store customer support. Keep your purchase records handy for faster service.