JIKONG JK-B2A24S20PHCR

Contents

JIKONG JK-B2A24S20PHCR Active BMS User Manual

Model: JK-B2A24S20PHCR

Brand: JIKONG

1. Introduction

The JIKONG JK-B2A24S20PHCR is an advanced Active Battery Management System (BMS) designed for a wide range of battery configurations, specifically supporting 8S to 24S series LiFePO4, Li-ion, and LTO batteries. This BMS features an Inverter Protocol Version, enabling seamless communication with various inverter brands. It integrates essential functions such as active balancing, comprehensive protection mechanisms, and multiple communication interfaces including CAN and RS485, alongside Bluetooth connectivity for mobile app monitoring. Its robust design, featuring a fully enclosed aluminum alloy shell, ensures high efficiency, durability, and superior heat dissipation.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x JIKONG JK-B2A24S20PHCR BMS Unit
  • 1 x Communication Board
  • 1 x Switch Key
  • 1 x Sampling Cable (long 70cm)
  • 1 x NTC (Negative Temperature Coefficient) Sensor (long 40cm)
JIKONG JK-B2A24S20PHCR BMS Package Contents
Figure 2.1: Package Contents - BMS unit, switch key, NTC sensor, sampling cables, and communication board.

3. Specifications

The JIKONG JK-B2A24S20PHCR BMS offers the following technical specifications:

Feature Specification
Model JK-B2A24S20PHCR
Number of Battery Strings 8S-24S (Li-ion, LiFePO4, LTO)
Continuous Discharge Current 200A
Continuous Charge Current 200A
Maximum Discharge Current (MAX 2min) 350A
Over Charge Protection Current (J) 10-200A
Over Discharge Protection Current (ADJ) 10-200A
Balance Current 2A (Active Balance)
Communication Interfaces RS485, CANBUS, Bluetooth
Other Interfaces HEAT, GPS, Display/Switch
Overcharge Protection Yes
Over Discharge Protection Yes
Overcurrent Protection Yes
Short Circuit Protection Yes
Temperature Detection 3 NTC sensors
Dimensions (L x W x H) 162mm x 102mm x 16.6mm (approx.)
Certifications CE, FCC, RoHS
JIKONG Product Specifications Table
Figure 3.1: Detailed JIKONG Product Specifications.
JIKONG BMS Product Dimensions
Figure 3.2: Product dimensions with a tolerance range of ±2mm.

4. Setup & Installation

Proper installation and wiring are crucial for the safe and efficient operation of your BMS. Please follow these steps carefully:

  1. Connect all cables: Ensure all necessary cables, including sampling lines, NTC sensors, and communication cables, are prepared.
  2. Insert the cable into the BMS: Carefully connect the sampling cables to the designated ports on the BMS.
  3. Connect the B-line and P-line to the battery: Connect the main negative (B-) and positive (P-) lines from the BMS to your battery pack.

4.1. BMS Interface Overview

The BMS unit features various interfaces for comprehensive battery management and communication:

JIKONG BMS Rich Interface Diagram
Figure 4.1: Rich interface diagram showing CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer ports.
  • CAN/RS485: For inverter communication and external devices.
  • NTC: Temperature sensor input.
  • GPS: Optional GPS module connection.
  • Display/Switch: For external display or soft switch.
  • Hot: Heating function output.
  • Sampling Port A/B: For connecting cell voltage sampling lines.

4.2. Wiring Diagrams

Refer to the following diagrams for correct wiring of your battery cells to the BMS:

Wiring Diagram for 24-String Cells
Figure 4.2: Wiring method for a 24-string cell configuration. Connect all balance wires from B1 to B24, the main negative (B-) and positive (P+) terminals, and the NTC sensor.
Wiring Diagram for 16-String Cells
Figure 4.3: Wiring method for a 16-string cell configuration. Connect all balance wires from B1 to B16, the main negative (B-) and positive (P+) terminals, and the NTC sensor.

Important: Always ensure correct polarity and sequence when connecting balance wires and main power cables to avoid damage to the BMS or battery pack. Consult a qualified professional if you are unsure about any wiring steps.

5. Operating Instructions

The JIKONG BMS can be monitored and configured via a mobile application or PC software.

5.1. Mobile App Connectivity

The BMS supports iOS, Android, and HarmonyOS systems. Download the "JIKONG SMART BMS" app from your device's app store. Once installed, connect to the BMS via Bluetooth to monitor real-time data and adjust settings.

JIKONG BMS Mobile App Interface
Figure 5.1: Mobile app interface for monitoring battery parameters and adjusting settings.

The app provides a clear overview of:

  • Voltage (Total and individual cell voltages)
  • Current (Charge/Discharge)
  • Temperature (NTC sensor readings)
  • State of Charge (SOC)
  • Alarms and Protection Status
  • Cycle Count

You can freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings through the app. Always read the internal parameters of the protection board before making changes.

5.2. PC Software and Inverter Protocol

The BMS also supports PC software for detailed monitoring and configuration, including setting up inverter communication protocols.

JIKONG BMS PC Software Interface
Figure 5.2: PC software interface for real-time data, settings, logging, and fault diagnosis.

The inverter communication protocol can be set via the host computer. The BMS is compatible with mainstream inverter communication protocols in the market.

Brand Protocol Name
JIKONG NIU, China tower
Growatt Voltronic, WOW
Other Pylon, Deye, Victron Energy, Sofar, Invt, SMA, SRNE (check app for specific protocol versions)
Supported CAN Protocols Table
Figure 5.3: Table of supported CAN protocols for various inverter brands.

6. Maintenance

The JIKONG JK-B2A24S20PHCR BMS is designed for durability and high performance with minimal maintenance. Its fully enclosed aluminum alloy shell provides excellent dustproof, waterproof, anti-voltage, and anti-vibration properties, reducing the risk of damage to internal electronic components.

JIKONG BMS Dustproof and Waterproof
Figure 6.1: Illustration of the BMS's dustproof and waterproof capabilities.
  • Cleaning: Keep the exterior of the BMS clean and free from dust and debris. Use a dry, soft cloth for cleaning. Avoid using liquids or abrasive cleaners.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
  • Environment: While the BMS is robust, avoid exposing it to extreme temperatures, direct sunlight for prolonged periods, or highly corrosive environments.
  • Firmware Updates: Check the official JIKONG website or app for any available firmware updates to ensure optimal performance and access to new features.

7. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following common troubleshooting steps:

  • No Power/No Display:
    • Check all main power connections (B- and P+) to ensure they are correctly and securely attached.
    • Verify the battery pack voltage is within the operational range of the BMS.
    • Ensure the switch key is in the 'ON' position if an external switch is used.
  • App Connection Issues:
    • Ensure Bluetooth is enabled on your mobile device.
    • Make sure the BMS is powered on and within Bluetooth range.
    • Restart the mobile app and try reconnecting.
    • Check if the app is updated to the latest version.
  • Inaccurate Readings (Voltage/Current):
    • Verify that all cell voltage sampling lines are correctly connected and in the right sequence.
    • Ensure the NTC temperature sensors are properly installed and making good contact with the battery cells.
  • BMS Entering Protection Mode:
    • Check the app or PC software for specific fault codes or protection triggers (e.g., overcharge, overdischarge, overcurrent, high/low temperature).
    • Address the underlying cause (e.g., reduce load, adjust charging parameters, ensure proper ventilation).

If the problem persists after attempting these steps, please contact JIKONG customer support for further assistance.

8. User Tips

  • Initial Setup: Double-check all wiring, especially the balance leads, before applying power to prevent damage. Incorrect wiring is a common cause of initial setup issues.
  • App Monitoring: Regularly use the mobile app to monitor your battery's health, cell voltages, and temperature. This helps in early detection of potential issues.
  • Parameter Adjustment: When adjusting protection parameters via the app or PC software, make small, incremental changes and observe the system's behavior. Always understand the implications of each setting.
  • Inverter Compatibility: Ensure your inverter's communication protocol is supported by the BMS. Refer to the supported protocols list in the operating instructions and the app's settings.

9. Warranty & Support

For any technical support, warranty claims, or inquiries regarding your JIKONG JK-B2A24S20PHCR BMS, please contact the JIKONG Official Store or your authorized dealer. Provide your product model and a detailed description of the issue to facilitate efficient support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.