1. Introduction
Thank you for choosing the ANDELI Plasma Cutting Machine CUT-50D LED. This DC Inverter Plasma Cutter features HF Pilot Arc non-touch cutting technology, designed for efficient and precise metal cutting. Please read this manual thoroughly before operation to ensure safe and effective use of the machine.

Figure 1: ANDELI Plasma Cutting Machine CUT-50D LED
Key Features:
- HF Pilot Arc Non-Touch Cutting: Provides clean cuts and extends consumable life.
- DC Inverter Technology: Ensures stable and efficient cutting performance.
- Max Cutting Thickness: Up to 16mm (3/4 inch) at 60 PSI.
- Dual Voltage Capability: Supports 110V/220V input (220V plug provided).
- 2T/4T Function: Offers continuous cutting button-activated operation.
- ECO Energy Saving Mode: Optimized for continuous thin plate cutting.
- Large LED Display: Clear display of air pressure, voltage, and current.
- Integrated Protections: Includes Under-voltage, Overcurrent, and Overheat protection.
- Physical Protection: Transparent protective shield for dust and rain splash proofing.
- Built-in Air Pressure Regulator: Simplifies setup and adjustment.
2. Setup Instructions
Before operating the plasma cutter, ensure all connections are secure and safety precautions are followed.
2.1 Unpacking and Inspection
- Carefully remove the plasma cutter and all accessories from the packaging.
- Inspect the machine for any signs of damage during transit. Do not operate if damaged.
- Verify that all accessories listed in the packing list are present.

Figure 2: Included Accessories
2.2 Component Identification
Familiarize yourself with the machine's front and rear panels:

Figure 3: Front and Rear Panel Overview
- Gas-electric Connector
- Pilot Arc Indicator
- Torch Switch
- Earth Clamp Connector
- Air Compressor Filter
- Power Cable
- Power Switch
- Rating Plate
- Cooling Fan
- Air Pressure Adjustment Button
2.3 Torch Assembly
Assemble the plasma torch components as shown:

Figure 4: Plasma Torch Head Assembly
- Attach the Torch Head.
- Insert the Electrode.
- Place the Nozzle.
- Secure the Nozzle Cup.
- Attach the Carriage (if required for specific cuts).
2.4 Power Connection
- Connect the provided 220V power plug to a suitable power outlet. The machine supports dual voltage (110V/220V), but the supplied plug is 220V. Ensure your power source matches the plug.
2.5 Air Supply Connection
This plasma cutter requires an external air compressor. The machine features a built-in air pressure regulator for easy adjustment.

Figure 5: Rear Panel with Air Regulator
- Connect your external air compressor to the Air Compressor Filter inlet (5) on the rear panel.
- Adjust the air pressure using the Air Pressure Adjustment Button (10) to the recommended range (45-60 PSI) for optimal cutting.
2.6 Ground Clamp Connection
- Connect the Earth Clamp to the Earth Clamp Connector (4) on the front panel.
- Securely attach the ground clamp to the workpiece or a clean, bare metal section of your work table to ensure a proper electrical ground.
3. Operating Instructions
3.1 Power On and Initial Settings
- Ensure all connections are correct and secure.
- Turn on the Power Switch (7) located on the rear panel.
- The Large LED Display will illuminate, showing current settings and status.

Figure 6: Large LED Display
3.2 Adjusting Cutting Parameters
- Air Pressure: Use the Air Pressure Adjustment Button (10) to set the air pressure. The display shows the pressure in MPa and PSI.
- Current: Use the Control Knob (8) to adjust the cutting current (Amps) according to the material thickness and type.
- Post-flow Time: The machine features an adjustable post-flow time (2-10 seconds) to cool the torch and extend consumable life.
3.3 2T/4T Function
The 2T/4T function allows for different torch trigger operations:

Figure 7: 2T/4T Function
- 2T (Two-Touch): Press and hold the torch trigger to start cutting; release to stop. Ideal for short cuts.
- 4T (Four-Touch): Press and release the torch trigger to start cutting; press and release again to stop. Ideal for long, continuous cuts, reducing hand fatigue.
3.4 Non-Touch Pilot Arc Cutting
The HF Pilot Arc allows for non-touch cutting, meaning the torch nozzle does not need to contact the workpiece to initiate the arc. This provides a cleaner cut and prolongs consumable life.

Figure 8: Non-Touch Pilot Arc in action
3.5 ECO Energy Saving Mode
Activate the ECO mode for energy-efficient cutting, especially suitable for continuous thin plate cutting. This mode optimizes power consumption without compromising cut quality.
3.6 Cutting Various Materials
The CUT-50D LED is capable of cutting a wide range of conductive materials:

Figure 9: Versatile Material Cutting
- Carbon Steel
- Aluminum Plate
- Stainless Steel Plate
- Rebar
- Copper Plate
- Painted Panel
- Galvanized Square Tube

Figure 10: Cutting Thickness Examples
The machine can achieve clean cuts up to 12mm and a maximum cutting thickness of 16mm.
Video 1: Product demonstration showcasing features and cutting various materials.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your plasma cutter.
- Cleaning: Keep the machine clean and free from dust and debris. The transparent protective shield helps, but regular wiping is recommended.
- Air Filter: Periodically check and clean the air compressor filter (5) to ensure a clean air supply, which is crucial for cut quality and consumable life.
- Consumables: Regularly inspect the torch electrode and nozzle. Replace them when worn to maintain optimal cutting performance and prevent damage to the torch. The non-touch pilot arc feature helps in saving on cutting nozzles/tips.
- Cooling Fan: Ensure the cooling fan (9) is unobstructed to prevent overheating.
5. Troubleshooting
The LED display provides indicators for common issues:
- Under-voltage Protection: If the input voltage drops below 190V (for 220V input), this indicator will light up. Check your power supply.
- Overcurrent Protection: Indicates potential damage to internal components due to excessive current. Discontinue use and consult support if persistent.
- Overheat Protection: Lights up if the machine becomes too hot. Allow the machine to cool down. Ensure proper ventilation and that the cooling fan is not obstructed.
- Low Pressure Protection: If the air pressure is too low, the machine may not operate correctly. Check your air compressor and adjust the air pressure regulator.
For issues not covered here, please contact ANDELI customer support.
6. Specifications

Figure 11: Key Features and Technologies
| Parameter | Value |
|---|---|
| Model Number | CUT-50D LED |
| Brand Name | ANDELI |
| Dimensions | 425*300*155mm (16.73" x 11.81" x 6.1") |
| Weight | Approximately 14.33 lbs |
| Rated Input Power Supply | Single-phase AC220V 50Hz (Dual Voltage 110V/220V capable) |
| Rated Input Capacity (KVA) | 6.5 |
| Power Factor | 0.7 |
| Rated Output (AV) | 50/100 |
| Rated Duty Cycle (%) | 60 |
| No-load Voltage (V) | 300 |
| Output Current Range (A) | 50 |
| Arc Ignition Mode | HF (High Frequency) |
| Post-flow Time (S) | 2-10 |
| Gas Pressure Range (Psi) | 45-60 |
| Insulation Grade | F |
| Cooling Mode | Air Cooling |
| Enclosure Ingress Protection | IP21S |
| Efficiency (%) | 85 |
| Certification | CE |
7. User Tips
- External Air Compressor: While the machine has a built-in air pressure regulator, an external air compressor is required to supply the necessary air for plasma cutting. Ensure your compressor can provide sufficient airflow and pressure.
- Optimal Air Pressure: Maintaining the recommended air pressure (45-60 PSI) is crucial for achieving clean cuts and maximizing consumable life. Too low pressure can result in poor cut quality, while too high pressure can waste air and wear out consumables faster.
- ECO Mode for Thin Materials: Utilize the ECO energy-saving mode when cutting thinner materials continuously to reduce power consumption and extend the machine's operational time.
- Consumable Management: Keep a supply of spare electrodes and nozzles. The non-touch pilot arc helps, but consumables will eventually wear out. Replacing them promptly ensures consistent cut quality.
- Safety First: Always wear appropriate personal protective equipment (PPE), including a welding helmet with a suitable shade, gloves, and protective clothing, when operating the plasma cutter.
8. Warranty and Support
For warranty information, service, or technical support, please contact the ANDELI Official Store or your authorized dealer. Keep your purchase receipt and product serial number handy when contacting support.
The product is CE certified, indicating compliance with European health, safety, and environmental protection standards.