Lishui Controller LSW06-90B1AFSB-U

Contents

Electric Bike Brushless Motor Controller

Model: LSW06-90B1AFSB-U

User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Lishui LSW06-90B1AFSB-U Brushless Motor Controller. This controller is designed for electric bikes and scooters, offering reliable performance for your e-mobility needs. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Lishui EPAC Drive System Brushless Motor Controller with all connected wires
Figure 1: Lishui EPAC Drive System Brushless Motor Controller

2. Product Specifications

FeatureSpecification
ModelLSW06-90B1AFSB-U
TypeController (Brushless Motor Controller)
Voltage (Rated)36V
Current (Max)14A
Vcutoff31.5V
MaterialAluminum Alloy
Dimensions (L*W*H)94mm * 49mm * 29mm
OriginMainland China
Close-up of the controller's label showing model LSW06-90B1AFSB-U, Vrated 36V, Irated 7A, Vcutoff 31.5V, Imax 14A.
Figure 2: Controller Label with Key Specifications
Dimensions of the controller: 94mm length, 49mm width, 29mm height.
Figure 3: Controller Dimensions

3. Installation and Setup

Proper installation is crucial for the safe and efficient operation of your electric bike. Ensure all connections are secure and waterproof where necessary.

3.1 Connector Identification

The LSW06-90B1AFSB-U controller features several connectors for various components of your e-bike system. Refer to the diagram below for identification:

Detailed wiring diagram for the controller, labeling connectors for Motor & Speed Signal, Battery Negative, Battery Positive, Sensor Signals, Communication Signal, Brake, and Light.
Figure 4: Controller Wiring Diagram
  1. Motor & Speed Signal: Connects to the electric motor and provides speed feedback.
  2. Battery Negative: Connects to the negative terminal of your 36V battery.
  3. Battery Positive: Connects to the positive terminal of your 36V battery.
  4. Sensor Signals: Connects to various sensors (e.g., pedal assist sensor, throttle sensor).
  5. Communication Signal: For connecting to a display unit (e.g., 5S Meter) or other communication devices.
  6. Brake: Connects to the brake levers, typically to cut motor power when brakes are applied.
  7. Light (7 & 8): Connects to the e-bike's lighting system.

3.2 Installation Steps

  1. Mounting: Securely mount the controller in a protected area on your bike, away from direct water exposure and excessive vibration. The aluminum alloy casing provides durability.
  2. Battery Connection: Connect the Battery Positive (red wire) and Battery Negative (black wire) to your 36V battery. Ensure correct polarity to prevent damage.
  3. Motor Connection: Connect the Motor & Speed Signal wires to your brushless motor.
  4. Sensor Connections: Connect all necessary sensors (throttle, PAS, etc.) to the Sensor Signals port.
  5. Communication/Display: Connect your 5S Meter or other compatible display unit to the Communication Signal port.
  6. Brake Connections: Connect the brake cut-off wires to your brake levers.
  7. Light Connections: Connect your e-bike lights to the designated light connectors.
  8. Cable Management: Organize and secure all cables to prevent snagging or damage during riding.

4. Operating Instructions

The LSW06-90B1AFSB-U controller utilizes advanced Hall-Sensorless Motor Technology, offering a smooth and efficient ride.

4.1 Powering On/Off

Typically, the controller is activated when the e-bike's battery is connected and the main power switch (if present) or display unit is turned on. To power off, turn off the display/main switch and disconnect the battery if storing for extended periods.

4.2 Riding Modes and Features

  • Zero Start: The Hall-Sensorless technology enables a smooth 'zero start' even under heavy load, providing immediate power from a standstill.
  • Throttle Control: Use the throttle to control motor speed directly.
  • Pedal Assist System (PAS): If connected, the PAS sensor will provide motor assistance based on your pedaling input. The level of assistance can usually be adjusted via your display unit (e.g., 5S Meter).
  • Brake Cut-off: The controller is designed to cut motor power immediately when the brake levers are engaged, enhancing safety.
  • OTA Functions Compatibility: The controller is compatible with various IoT devices and can support Over-The-Air (OTA) functions for potential firmware updates or advanced diagnostics when paired with a compatible IoT module and app.
  • Longer Driving Distance: With precise adjustments and a certain amount of regeneration brake, the controller can contribute to longer riding mileages and protect itself from overheating.

4.3 Display Unit (e.g., 5S Meter)

Your 5S Meter or other compatible display unit will provide real-time information such as speed, battery capacity, and potentially allow adjustment of PAS levels and other settings. Refer to your display unit's manual for specific operating instructions.

5. Maintenance

The LSW06-90B1AFSB-U controller is designed for low maintenance, thanks to its Hall-Sensorless technology which reduces common failure points associated with hall sensors.

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
  • Cleanliness: Keep the controller clean and free from dirt, dust, and moisture. Use a dry cloth for cleaning.
  • Environmental Protection: While the controller is robust, avoid prolonged exposure to extreme temperatures or direct water immersion.
  • Firmware Updates: If using an IoT module, check for available firmware updates via the associated app to ensure optimal performance and access to new features.

6. Troubleshooting

If you encounter issues with your controller, follow these basic troubleshooting steps:

  • No Power: Check battery connections, ensure the battery is charged, and verify the main power switch/display is on.
  • Motor Not Responding: Inspect motor connections, throttle/PAS sensor connections, and brake cut-off wires. Ensure no wires are pinched or damaged.
  • Intermittent Operation: Check for loose connections or signs of corrosion on any connectors.
  • Error Codes on Display: If your display unit shows an error code, consult its manual for the meaning and recommended actions.

For persistent issues, please contact Lishui Controller's after-sales support. The company prides itself on a quick response after-sales team and a low failure rate for its products.

7. User Tips

  • Waterproofing: While the controller is designed to be robust, consider adding extra protection to exposed connections, especially in wet environments, to prolong its lifespan.
  • Cable Management: Use zip ties or cable wraps to keep wires tidy and prevent them from interfering with moving parts or getting damaged.
  • Battery Compatibility: Always use a 36V battery that is compatible with the controller's current rating (14A max) to avoid overloading.
  • Regular Checks: Before each ride, quickly check that all components are securely attached and no wires are visibly damaged.

8. Warranty and Support

Lishui Controller products are manufactured under strict quality control standards, including ISO 9001, RoHS, EN 15194:2017, EN ISO 13849-1:2015, UL 2849, and UL 2272 certifications. For warranty claims or technical support, please contact the seller or Lishui Controller directly.

8.1 Contact Information

For detailed contact information, including addresses, telephone numbers, and email for Lishui Controller's main office, EU R&D Center, and Taiwan Office, please refer to the official Lishui Controller Brochure (PDF) available at Lishui Controller Brochure.

9. Frequently Asked Questions (FAQ)

Q: Is this controller compatible with all 36V batteries?
A: Yes, it is compatible with standard 36V Lithium-Ion batteries. Ensure your battery can supply the required current (up to 14A) for optimal performance.
Q: Can I use this controller with a geared motor?
A: This is a brushless motor controller. It is designed for brushless DC (BLDC) motors, which can be geared or direct drive. Ensure your motor is a BLDC type.
Q: What is the purpose of the 'Communication Signal' port?
A: This port is used to connect to a display unit (like a 5S Meter) or other smart accessories that communicate with the controller to show riding data and allow setting adjustments.
Q: How do I know if my controller is working correctly?
A: A properly functioning controller will provide smooth power to the motor, respond to throttle/PAS input, and allow your display unit to show accurate information. If you experience erratic behavior or no power, refer to the troubleshooting section.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.