1. Introduction
Thank you for choosing the CONOPU 12L/Day Dehumidifier. This appliance is designed to efficiently remove excess moisture from your indoor environment, helping to prevent mold, mildew, and other humidity-related issues, thereby improving air quality and comfort. Key features include a powerful 12L/day dehumidification capacity, automatic humidity control, a quiet sleep mode, and a convenient 24-hour timer. Please read this manual thoroughly before operation to ensure safe and optimal performance.

Figure 1: Efficient Dehumidification - 12L of moisture per day, covering up to 120m³ (~20m²).
2. Safety Information
Please observe the following safety precautions to reduce the risk of electric shock, injury, or fire:
- Always plug the dehumidifier into a grounded electrical outlet with the correct voltage.
- Do not operate the unit with wet hands or in excessively wet environments.
- Keep the appliance away from water sources and flammable materials.
- Ensure the air inlet and outlet are not blocked to maintain proper airflow.
- Do not allow children or pets to play with or near the dehumidifier.
- Unplug the unit from the power outlet before cleaning, maintenance, or when not in use.
- Do not attempt to repair or modify the appliance yourself. Contact qualified service personnel for assistance.
- Place the unit on a stable, level surface to prevent tipping.
3. Product Overview
3.1 Components
- Control Panel: Located on the top of the unit, with buttons and a digital display.
- Air Inlet: Located on the back/sides, where humid air enters.
- Air Outlet: Located on the front/top, where dry air exits.
- Water Tank: Removable tank for collecting condensed water.
- Drainage Port: Located on the back for continuous drainage hose connection.
- Wheels: For easy portability.

Figure 2: Portable Design with 360° Wheels.
3.2 Control Panel (Typical Layout)
The control panel typically includes:
- Power Button: To turn the unit on or off.
- Mode Button: To cycle through operating modes (e.g., Auto, Sleep, Continuous).
- Humidity Setting Buttons (+/-): To adjust the desired humidity level.
- Timer Button: To set the 24-hour timer for automatic on/off.
- Fan Speed Button: To select between high and low fan speeds.
- Digital Display: Shows current humidity, set humidity, or timer settings.
- Water Full Indicator: Lights up when the water tank is full.
4. Setup Instructions
- Unpacking: Carefully remove the dehumidifier from its packaging. Retain packaging materials for future storage or transport.
- Placement: Place the unit upright on a firm, level surface. Ensure there is at least 20 cm (8 inches) of clear space around the air inlet and outlet for optimal airflow. Avoid placing it against walls or furniture that could obstruct ventilation.
- Power Connection: Plug the power cord into a suitable, grounded electrical outlet.
- Drainage Options:
- Manual Drainage (Default): Ensure the water tank is correctly inserted into the unit. The dehumidifier will collect water in the tank and automatically pause operation when the tank is full.
- Continuous Drainage: For extended operation without needing to empty the tank, connect a drainage hose (not always included, check product contents) to the drainage port on the back of the unit. Ensure the hose is sloped downwards to allow gravity to drain the water into a floor drain or suitable container.

Figure 3: Continuous and Manual Drainage Options. The unit features a 2.5L water tank and supports continuous drainage via a hose.
5. Operating Instructions
5.1 Power On/Off
Press the Power button once to turn the dehumidifier on. Press it again to turn the unit off.
5.2 Setting Desired Humidity
In Auto mode, use the '+' and '-' buttons to set your desired humidity level. The adjustable range is typically between 40% and 80% relative humidity. The unit will operate until the ambient humidity reaches your set level.

Figure 4: Automatic Humidity Control - Adjusts humidity from 40% to 80%.
5.3 Operating Modes
- Automatic Dehumidification: The unit will automatically turn on when the environmental humidity is 55% or higher and turn off when it drops to 45% or lower, or maintains a 5% difference from your set humidity.
- Sleep Mode: Press the Mode button to activate Sleep Mode. The fan speed will be reduced for quieter operation, and the display lights will dim to minimize disturbance.
- Continuous Mode: In this mode, the dehumidifier will run continuously regardless of the humidity level, ideal for very damp conditions or drying clothes.
5.4 24-Hour Timer
Press the Timer button to set a desired operating time (in hours) for the unit to automatically turn on or off. You can program it to start or stop at your preferred time within a 24-hour cycle.

Figure 5: 24-Hour Timer Function.
5.5 Fan Speed
Use the Fan Speed button to switch between two available fan speeds (High/Low) to adjust the dehumidification rate and noise level.
6. Maintenance
Regular maintenance ensures the longevity and efficiency of your dehumidifier.
- Emptying the Water Tank: When the water tank is full, the 'Water Full' indicator will illuminate, and the unit will automatically pause operation. Carefully remove the tank, empty the collected water, and reinsert it securely.
- Cleaning the Air Filter: The air filter should be cleaned regularly, approximately every two weeks, or more often depending on air quality. Remove the filter (usually located at the back or side), wash it with mild soap and warm water, rinse thoroughly, and let it air dry completely before reinserting.
- Cleaning the Exterior: Wipe the exterior of the dehumidifier with a soft, damp cloth. Do not use harsh chemicals, abrasives, or solvents, as these can damage the surface.
- Storage: If storing the unit for an extended period, ensure the water tank is empty and clean, and the air filter is clean and dry. Unplug the unit and store it in an upright position in a cool, dry place.
7. Troubleshooting
Before contacting customer support, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dehumidifier does not turn on. | No power; power button not pressed; water tank full or incorrectly inserted. | Check power cord connection; press power button; empty and reinsert water tank correctly. |
| No water collected or low dehumidification. | Humidity level too low; air filter clogged; room temperature too low; doors/windows open. | Increase desired humidity setting; clean air filter; ensure room temperature is within operating range; close doors and windows. |
| Unit is noisy. | Unit not on a level surface; obstructions near fan; air filter clogged. | Place on a flat, stable surface; remove any obstructions; clean air filter. |
| Water Full indicator is on, but tank is not full. | Water tank sensor malfunction or obstruction. | Remove and reinsert the water tank; check for any debris around the sensor. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | CSD08-12L |
| Dehumidification Capacity | 12 Liters/Day |
| Water Tank Capacity | 2.5 Liters |
| Coverage Area | Up to 120 m³ (~20 m²) |
| Operating Power | As low as 150W (at 5°C) |
| Humidity Setting Range | 40% - 80% RH |
| Timer | 24-Hour Programmable |
| Fan Speeds | 2 Modes (High/Low) |
| Dimensions (L x W x H) | 20 x 27 x 41 cm |
| Weight | 10 kg |

Figure 6: Energy-Efficient Operation, as low as 150W.
9. User Tips
- For best results, operate the dehumidifier in an enclosed space. Keep windows and doors closed to prevent humid air from entering.
- Place the dehumidifier in the area with the highest humidity. If dehumidifying a large area, consider central placement.
- Regularly check and clean the air filter to maintain optimal performance and air quality. A dirty filter can reduce efficiency.
- Utilize the continuous drainage option for long-term use in basements or other consistently damp areas to avoid frequent tank emptying.
- The unit can also assist in drying clothes by blowing warm air at high speed during the dehumidification process, offering an energy-saving lifestyle option.

Figure 7: Use for Drying Clothes.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly through your purchase platform. Please have your model number and purchase date available when contacting support.