HWATEL 3D-FB RG58 LMR200

Contents

HWATEL Original 3D-FB RG58 LMR200 50ohms Coaxial Cable User Manual

For 2G, 3G, 4G, 5G, 6G Wifi Feeder for Cellular Booster Repeater Antenna

1. Introduction

The HWATEL Original 3D-FB RG58 LMR200 50ohms Coaxial Cable is a high-quality, low-loss cable designed for efficient signal transmission across a wide frequency range. It is ideal for connecting cellular boosters, repeaters, and antennas in various applications, supporting 2G, 3G, 4G, 5G, 6G, and WiFi networks. This manual provides essential information for the proper installation, operation, and maintenance of your coaxial cable.

HWATEL Original Coaxial Cable for 2G/3G/4G/5G/6G/Wifi, 600-6000MHz, 3D-FB RG-58, various lengths.
Figure 1: HWATEL Original Coaxial Cable Overview

2. Key Features

  • Wide Frequency Support: Operates efficiently across 600MHz to 6000MHz, compatible with 2G, 3G, 4G, 5G, 6G, and WiFi signals.
  • Low Loss Design: Engineered for minimal signal attenuation, ensuring strong and stable connections.
  • Double Shielding: Provides superior interference protection, enhancing signal integrity.
  • Durable Construction: Features a Copper Core, Phisically Foamed PE, Double High Density Shielding, and Dualable PVC for long-lasting performance.
  • N Male Connectors: Equipped with N Male to N Male connectors for secure and reliable connections.
  • Variety of Lengths: Available in 3, 10, 15, 20, and 30-meter lengths to suit diverse installation needs.
  • Bridge Connector Option: A 0-meter bridge connector (N Male-N Male) is available for direct connection with 0dB insert loss.
Internal structure diagram of HWATEL RG-58 3D-FB Low Loss Cable, showing Copper Core, Phisically Foamed PE, Double High Density Shielding, and Dualable PVC.
Figure 2: Coaxial Cable Internal Structure

3. Technical Specifications

AttributeSpecification
TypeCable Adapter
ModelRG-58 3D-FB (LMR200 equivalent)
Impedance50 ohms
Frequency Range600MHz - 6000MHz
ConnectorsN Male to N Male
ShieldingDouble Shield (Double High Density Shielding)
Core MaterialCopper Core
DielectricPhisically Foamed PE
Jacket MaterialDualable PVC
CertificationsCE, FCC, RoHS
OriginMainland China

Available Lengths:

  • 0 Meter (Bridge Connector)
  • 3 Meter
  • 10 Meter
  • 15 Meter
  • 20 Meter
  • 30 Meter

4. Package Contents

Depending on your selection, your package will contain one HWATEL Original 3D-FB RG58 LMR200 50ohms Coaxial Cable of the specified length, or a 0-meter bridge connector.

0 Meter Cable - No Loss Bridge Connector
0 Meter Bridge Connector
3 Meter HWATEL Coaxial Cable
3 Meter Cable
10 Meter HWATEL Coaxial Cable
10 Meter Cable
15 Meter HWATEL Coaxial Cable
15 Meter Cable
20 Meter HWATEL Coaxial Cable
20 Meter Cable
30 Meter HWATEL Coaxial Cable
30 Meter Cable

5. Setup and Installation

This coaxial cable is designed for straightforward connection between compatible devices. Ensure all devices are powered off before making connections.

5.1 Connecting to a Cellular Booster/Repeater System

  1. Identify Ports: Locate the N-type female ports on your cellular booster/repeater and the external/internal antennas.
  2. Connect External Antenna: Attach one end of the HWATEL coaxial cable to the N-type female port of your external antenna. Hand-tighten the connector, then use a wrench to gently secure it, ensuring a snug fit without over-tightening.
  3. Route Cable: Carefully route the cable to your cellular booster/repeater, avoiding sharp bends, kinks, or areas where it might be pinched or damaged.
  4. Connect to Booster: Attach the other end of the coaxial cable to the designated "Outdoor Antenna" or "BTS" N-type female port on your cellular booster/repeater. Secure it as described in step 2.
  5. Connect Internal Antenna (if applicable): If using a separate internal antenna, use another HWATEL coaxial cable to connect it to the "Indoor Antenna" or "Mobile" N-type female port on your booster/repeater.
  6. Power On: Once all connections are secure, power on your cellular booster/repeater system according to its specific instructions.

5.2 Using the 0 Meter Bridge Connector

The 0-meter bridge connector (N Male-N Male) is used to directly connect two N-type female ports, effectively extending or adapting connections with minimal signal loss.

  1. Identify Connection Points: Ensure both devices or cables you wish to connect have N-type female ports.
  2. Attach Connector: Screw one end of the bridge connector onto the first N-type female port.
  3. Complete Connection: Screw the other end of the bridge connector onto the second N-type female port. Ensure both connections are hand-tightened and then gently secured with a wrench.
Comparison of HWATEL RG-58 Low Loss Coaxial Cable with HUAWEI Original, highlighting same raw manufacture.
Figure 3: Example of Coaxial Cable Connection (with antenna)

6. Operation

Once properly installed, the HWATEL coaxial cable operates passively to transmit radio frequency (RF) signals between your connected devices. Its low-loss design ensures that the signal strength is maintained over the cable's length, contributing to optimal performance of your cellular booster, repeater, or antenna system.

  • Ensure all connections are tight to prevent signal leakage or ingress.
  • Avoid bending the cable sharply, as this can damage the internal structure and degrade performance.
  • Verify that the cable length chosen is appropriate for your setup to minimize unnecessary signal loss.

7. Maintenance

The HWATEL coaxial cable requires minimal maintenance to ensure long-term performance.

  • Regular Inspection: Periodically check the cable for any signs of physical damage, such as cuts, kinks, or frayed connectors.
  • Clean Connectors: If connectors appear dirty, gently clean them with a dry, lint-free cloth. Avoid using liquids or abrasive materials.
  • Secure Connections: Ensure all N-type connectors remain tightly secured to prevent signal degradation.
  • Environmental Protection: If installed outdoors, ensure the cable and connectors are protected from extreme weather conditions, moisture, and UV exposure where possible. Use weatherproofing tape around outdoor connections for added protection.

8. Troubleshooting

If you experience issues with your signal, consider the following troubleshooting steps:

  • Check Connections: Ensure all N-type connectors are securely tightened at both ends of the cable. Loose connections are a common cause of signal loss.
  • Inspect Cable for Damage: Look for any visible damage to the cable jacket, such as cuts, crimps, or severe bends. Damaged cables should be replaced.
  • Verify Cable Type: Confirm that you are using a 50-ohm coaxial cable (like the RG58 3D-FB) for 50-ohm systems (e.g., cellular, WiFi). Using a 75-ohm cable (e.g., for TV) with a 50-ohm system will result in significant signal loss.
  • Minimize Cable Length: Use the shortest possible cable length required for your installation to reduce signal attenuation.
  • Test Components Individually: If possible, test other components of your system (antenna, booster) independently to isolate the source of the problem.

9. User Tips

  • For outdoor installations, consider using weather-resistant N-type connectors or weatherproofing tape to protect connections from moisture.
  • When routing cables, use cable ties or clips to keep them neat and prevent accidental damage or tripping hazards.
  • Always choose the appropriate cable length. While longer cables offer flexibility, they also introduce more signal loss.
  • Ensure compatibility: This cable is designed for 50-ohm systems. Do not mix with 75-ohm components unless specifically designed to do so with impedance matching.

10. Warranty and Support

For any questions, technical assistance, or support regarding your HWATEL coaxial cable, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty terms and contact information.

© 2024 HWATEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.