TELESIN P1-MP-10

Contents

TELESIN Magnetic Phone Camera Grip User Manual

Model: P1-MP-10

Brand: TELESIN

1. Introduction

Thank you for purchasing the TELESIN Magnetic Phone Camera Grip. This manual provides important information for the safe and effective use of your product. Please read it carefully before use and retain it for future reference.

Important Notes

  • Always read this manual thoroughly before using the product.
  • Keep this manual in a safe place. If another user needs to use this product, please provide them with this manual.
  • Pay attention to all warnings and follow all instructions provided in this user manual.
  • Do not disassemble or damage the product. If the product is deformed or gets wet, stop using it immediately.
  • Keep this product out of reach of children.

2. Product Overview

The TELESIN Magnetic Phone Camera Grip is designed to enhance your smartphone photography experience with ergonomic design and versatile controls.

TELESIN Magnetic Phone Camera Grip with phone and remote

Figure 2.1: TELESIN Magnetic Phone Camera Grip

Product Components

Product list including camera grip, magnetic ring, cleaning kit, phone lanyard, battery removal tool, and instruction manual.

Figure 2.2: Product List

Part Names and Functions

Diagram of the camera grip with labels for Mode Button 1, Mode Button 2, Zoom Lever, Indicator Light, Shutter Button, and 1/4 Inch Thread Hole.

Figure 2.3: Product Introduction Diagram

  • Mode Button 1: Used to switch between shooting modes.
  • Mode Button 2: Used to switch between shooting modes.
  • Zoom Lever: Slide to zoom in or out during photo and video shooting.
  • Indicator Light: Shows device status (e.g., power on, pairing, low battery).
  • Shutter Button:
    • Long Press (2 seconds): Turn the device on/off.
    • Single Press: Start taking photos or recording videos.
    • Half Press (double tap): Switch between front and rear cameras.
    • Half Press: Focus.
  • 1/4 Inch Thread Hole: For mounting on tripods or other accessories.

3. Setup

3.1 Initial Use

For first-time use, please remove the plastic battery tab from the remote control.

Diagram showing how to remove the plastic battery tab from the remote control.

Figure 3.1: Removing Battery Tab

3.2 Attaching to Phone

Attach the product to the back of your phone. For compatible magnetic models (iPhone 12 to 16 series), the grip will attach directly. For other models or if using a phone case, you have two options:

  1. Use a strong magnetic phone case: (Not included, purchase separately)
  2. Use a magnetic sticker (magnetic ring): Choose a smooth and flat phone case, attach the metal ring to it, press gently, and then wait for 12 hours before use. Oily materials in phone cases (e.g., liquid silicone, patterned cases) can affect adhesion and are not recommended. Do not attach the metal ring directly to the back of a bare phone. Do not reapply the magnetic plate to prevent a reduction in adhesiveness.
Diagram showing how to attach the camera grip to the back of a smartphone.

Figure 3.2: Attaching the Grip to a Phone

3.3 Bluetooth Pairing

  1. Power on the grip by holding the Shutter Button for 2 seconds. The indicator light will flash, indicating it's in Bluetooth pairing mode.
  2. On your phone, go to Bluetooth settings and connect to the device named TELESIN_MG.
  3. If not connected within 2 minutes, the device will automatically shut off.

3.4 iPhone Specific Settings for Zoom

For iPhone users, Bluetooth primarily enables the shutter function. To use other functions like zoom, you need to enable the Zoom feature in your iPhone settings:

  1. Go to Settings.
  2. Navigate to Accessibility.
  3. Select Zoom.
  4. Choose Zoom Region and select FullScreen Zoom.
  5. Turn on Zoom.

Note: To restore the view after zooming, double-tap with three fingers.

Screenshots showing iPhone settings for Accessibility and Zoom, with FullScreen Zoom enabled.

Figure 3.3: iPhone Zoom Settings

4. Operating Instructions

4.1 Power On/Off

  • Power On: Press and hold the Shutter Button for 2 seconds. The indicator light will flash, and the device will enter Bluetooth pairing mode.
  • Power Off: In either on or sleep mode, press and hold the Shutter Button for 2 seconds. The indicator light will flash quickly three times and then turn off, indicating the remote control is off.

4.2 Shutter Button Functions

Diagram illustrating the functions of the Shutter Button: green light for power on, half-press for focus, single press for photo/video, double half-press to switch camera.

Figure 4.1: Shutter Button Instructions

  • Long Press (2 seconds): Power on/off.
  • Single Press: Start/stop photo capture or video recording.
  • Half Press (double tap): Switch between front and rear cameras.
  • Half Press: Focus.

4.3 Zoom Lever Functions

Diagram showing how to use the zoom lever by toggling it left and right.

Figure 4.2: Zoom Lever Instructions

  • During photo and video shooting, slide the lever to zoom in or out.

4.4 Mode Button Functions

Diagram showing how to use the mode button by pressing left or right to switch modes.

Figure 4.3: Mode Button Instructions

  • Switch between different shooting modes.
  • In landscape mode, after half-pressing to focus, the mode button can adjust the exposure.

4.5 Quick Wake-up Function

The quick wake-up function allows you to quickly activate your phone's camera.

Instructions for Quick Wake Function, listing supported and unsupported phone models and wake methods.

Figure 4.4: Quick Wake Function Instructions

Screen Status Black Screen (All States) Screen On (Unlocked Status)
iOS Long Press Mode Button 1 Click Mode Button 2
Some Android Systems Long Press Mode Button 1 Long Press Mode Button 1
Vivo Long Press Mode Button 1 - First Light Up Screen. Long Press Mode Button 1 Again Long Press Mode Button 1

Note: Quick wake-up function is currently not supported on Samsung and HarmonyOS 5.0.

4.6 Sleep Mode

  • The device will automatically enter sleep mode after 5 minutes of inactivity post-pairing.
  • If the grip is disconnected from the phone (via phone settings, distance, or Bluetooth off), it will enter sleep mode. It will automatically turn off after 30 minutes in sleep mode.
  • If not paired within 2 minutes after powering on, the device will automatically power off.

4.7 Waking from Sleep Mode

  • Press any button on the remote control to wake it up.
  • The device will automatically reconnect if the last paired phone's Bluetooth is on.
  • If the previously paired phone's Bluetooth is off and there's no pairing within 2 minutes, the device will enter sleep mode and shut down after 30 minutes.

5. Maintenance

5.1 Low Battery Reminder

When the battery is low, all indicator lights will turn red, indicating that the battery level is below 20%. Please replace the battery promptly.

5.2 Battery Replacement

To replace the battery:

  1. Remove the remote control from the grip.
  2. Use the provided tool to disassemble the battery compartment cover by turning it clockwise to loosen it.
  3. Replace the old battery with a new CR1632 button cell battery.
  4. Securely close the battery compartment.
Diagram showing how to remove the remote control and replace the CR1632 button cell battery.

Figure 5.1: Battery Replacement

6. Troubleshooting

Problem Possible Cause Solution
Device does not power on. Low battery or battery tab not removed. Replace battery or ensure plastic battery tab is removed.
Cannot connect via Bluetooth. Device not in pairing mode, or out of range. Ensure device is powered on and indicator light is flashing. Check phone's Bluetooth settings.
Zoom function not working on iPhone. iPhone Zoom accessibility feature is not enabled. Enable Zoom in iPhone Settings > Accessibility > Zoom.
Quick wake-up not working on Samsung/HarmonyOS. Feature is not supported on these OS versions. This is a known limitation. Basic camera functions should still work.
Phone grip detaches easily. Weak magnetic connection due to phone case material or improper magnetic ring application. Use a strong magnetic phone case or ensure the magnetic ring is properly adhered to a smooth, flat case and allowed to set for 12 hours.

7. Specifications

Image displaying product specifications including model, material, dimensions, weight, battery model, nominal voltage, and Bluetooth compatibility.

Figure 7.1: Product Specifications

Attribute Value
Product Model P1-MP-10
Material ABS + PC + Aluminum Alloy
Product Dimensions 124.7mm × 79.6mm × 37.7mm
Product Weight 109g
Battery Model CR1632
Battery Nominal Voltage 3.0V
Bluetooth Compatible Devices Apple, Android, HarmonyOS devices
Magnetic Compatibility iPhone 12 to 16 series. Other models require a magnetic phone case or an adhesive magnetic plate.
FCC ID 2A6I2-P5MP001

8. Safety Warnings

WARNING: INGESTION HAZARD

This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. KEEP new and used batteries OUT OF REACH of CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

  1. This product contains a button battery. For safety reasons, please dispose of used batteries properly and do not discard or burn them carelessly. Also, ensure that the batteries are kept away from children and pets to avoid accidents.
  2. Button batteries can be easily swallowed by children. To avoid potential dangers, please store them in a location out of reach of children to prevent serious consequences such as accidental ingestion, insertion into the nose or ears.
  3. This product contains a button battery. Danger, do not touch! If swallowed, the button cell may cause serious injuries such as esophageal burns. Please store it properly to prevent children from accessing it. In case of accidental ingestion, seek medical attention immediately.
  4. This product is compatible with CR1632 battery type.
  5. The nominal voltage of the battery used in this product is 3.0V.
  6. The button battery included in this product is not rechargeable.
  7. Do not force discharge, recharge, disassemble, heat above 60°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
  8. Ensure the batteries are installed correctly according to polarity (+ and -).
  9. Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
  10. If the device has not been used for a long time, please remove the battery and recycle or dispose of it immediately.
  11. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF exposure statement: The device was evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

9. User Tips

  • The controls are highly responsive with no noticeable lag between button press and photo capture.
  • The integrated LED light is bright and includes a circular mirror, making it versatile for various shooting scenarios.
  • Be mindful of the strong magnets on both the grip and any attached fill light when detaching from your phone to avoid accidental drops.
  • For iPhones, ensure a strong magnetic connection, especially if using a phone case, as some cases may reduce magnetic adhesion.
  • While the quick wake-up function may not be supported on all Android devices (e.g., Samsung, HarmonyOS), basic camera functions like shutter, zoom, and mode changes generally work well.

10. Warranty and Support

Disclaimer

Please read this statement carefully. Once you use this product, it is deemed that you fully recognize and accept this statement. Before each use, please carefully check the product. If it is damaged or deformed, do not use it. By using this product, you acknowledge and agree that you will be fully responsible for the actions and possible consequences of using this product. You promise to use this product only for legitimate and legal purposes. You understand and agree that Telesin Digital Co., Ltd. (hereinafter referred to as "Telesin") will not be liable for any abuse, adverse effects, damages, injuries, penalties or other legal consequences directly or indirectly caused by the use of this product. Users should follow the usage precautions mentioned herein and others. Within the scope of national laws and regulations, the right to interpret and modify this commitment belongs to Telesin.

Warranty Period

The TELESIN Magnetic Phone Camera Grip comes with a 6-month warranty service, starting from the day you receive the product.

Support

For further assistance or inquiries, please visit our official website: www.telesin.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.