1. Introduction
The Teyun X100 is a high-performance 2-channel digital power amplifier designed for various audio applications, including home theater systems, stage performances, weddings, karaoke, and small shows. It delivers 150W per channel at 8Ω and features an XLR interface for professional audio connections. This manual provides essential information for the safe and efficient operation of your Teyun X100 amplifier.

2. Product Features
- 2-Channel Output: Provides stereo sound for immersive audio experiences.
- High Power Output: Delivers 150W per channel at 8Ω.
- XLR Interface: Professional balanced input/output connections.
- Parallel Output: Supports connecting multiple speakers or amplifiers.
- Adjustable Volume Knobs: Independent volume control for each channel.
- Intelligent Protection: Built-in safeguards for reliable operation.
- Built-in Cooling: Ensures stable performance during extended use.
- Built-in Power Supply: Integrated AC power for convenience.
3. Safety Information
The Teyun X100 amplifier is equipped with intelligent protection features to ensure safe and reliable operation. Please use with confidence, adhering to all safety guidelines.

- DC Protection: Safeguards against direct current output, protecting connected speakers.
- Overload Protection: Prevents damage from excessive signal levels.
- Overheat Protection: Automatically shuts down the unit if internal temperatures become too high.
- Short Circuit Protection: Protects the amplifier and speakers from damage due to shorted connections.
Always ensure proper ventilation around the amplifier to facilitate cooling. Do not block air vents.

4. Package Contents
Upon unpacking, please verify that all items listed below are included and in good condition:
- Teyun X100 Amplifier (1 pc)
- Instruction Manual (1 pc)
- Packaging Box (1 pc)

5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TEYUN |
| Model Number | X100 |
| Channels | 2 (2.0 Stereo) |
| Interface | XLR Input, Speaker XLR Output |
| Output Power | 150W*2 (8Ω) |
| Maximum Power Per Channel | 131-200W |
| Power Supply | AC100~240V, 50-60Hz (Built-in) |
| Frequency Response | 20Hz-20kHz (±0.5dB) |
| Conversion Rate | ≥30V/us |
| Damping Coefficient | ≥800 |
| Crosstalk | >60dB/1KHz |
| Signal-to-Noise Ratio | >100dB |
| Total Harmonic Distortion (THD) | <0.01%, 8Ω, 1W@1KHz |
| Intermodulation Distortion (IMD) | <0.03%, 8Ω, @1KHz |
| Package | Yes |
| Origin | Mainland China |
6. Setup and Installation
Follow these steps to properly set up your Teyun X100 amplifier:
- Connect Speakers: Connect your passive speakers to the CH1 OUTPUT and CH2 OUTPUT XLR ports on the rear panel of the amplifier. Ensure secure connections.
- Connect Audio Source: Connect your mixing console or other audio source (e.g., CD player, DVD player) to the CH1 INPUT and CH2 INPUT XLR ports on the rear panel.
- Power Connection: The amplifier has a built-in power supply with a non-removable power cord. Connect the power cord to a suitable AC100~240V, 50-60Hz power outlet.


For connecting multiple amplifiers or speakers, utilize the CH LINK output ports to synchronize the signal across units.

7. Operation
To avoid popping noises and ensure proper function, follow the correct power-on and power-off sequence:
Power-on Steps:
- First, turn on the sound source device (e.g., mixer, CD player).
- Then, turn on the Teyun X100 amplifier using its power switch.
Power-off Steps:
- First, turn off the Teyun X100 amplifier using its power switch.
- Then, turn off the sound source device (e.g., mixer, CD player).

Failure to follow this sequence may result in a loud 'banging' sound from the speakers when turning the machine on or off.
Use the adjustable volume knobs on the front panel to control the output level for each channel independently.
8. Maintenance
- Keep the amplifier clean by wiping it with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ensure adequate ventilation around the unit. Do not place objects on top of the amplifier that could block the air vents.
- Avoid exposing the amplifier to extreme temperatures, humidity, or direct sunlight.
- Regularly check all cable connections to ensure they are secure.
9. Troubleshooting
If you encounter issues with your Teyun X100 amplifier, consider the following basic troubleshooting steps:
- No Sound: Check all power and audio connections. Ensure the amplifier is powered on and the volume levels are not set to minimum. Verify that the audio source is functioning correctly.
- Distorted Sound: Check input signal levels to ensure they are not too high, causing clipping. Inspect speaker cables for damage or loose connections.
- Unit Not Powering On: Ensure the power cord is securely plugged into a working outlet. Check for tripped circuit breakers.
- Overheating: Ensure the amplifier has sufficient ventilation and its air vents are not blocked. If the unit repeatedly overheats, contact support.
For more complex issues, please refer to the support section or contact the manufacturer.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Please note that specific warranty terms may vary by region and retailer.