NEWBOLER LIG005 Smart Bicycle Light User Manual

1. Product Overview

The NEWBOLER LIG005 is a high-performance smart bicycle light designed for various cycling environments. It features a powerful 10000 lumen output, a large 10000mAh battery, and intelligent sensing capabilities for automatic brightness adjustment. Its durable aluminum alloy body and IPX6 waterproof rating ensure reliability in diverse weather conditions. The light also doubles as a power bank for charging other devices.

Product Information & Specifications

2. Setup & Installation

The LIG005 bicycle light offers versatile mounting options to suit your preference. Ensure all components are securely fastened before riding.

Handlebar Mount Installation (Formal Dress)

1. Unscrew the screws at the back of the bracket.
2. Place the bracket on the handlebars of the bicycle.
3. Take out the screws that were just removed from the bracket.
4. Place the screws behind the bracket and tighten them.
5. Align the latch under the headlight with the bracket position.
6. Rotate the light to screw it into place.

Out-Front Mount Installation (Suspension)

1. Attach the rubber strap to the mount and secure it around the handlebar.
2. Adjust the strap for a snug fit.
3. Tighten the knob on the mount to secure it firmly.
4. Slide the light onto the mount from the front.
5. Ensure the light clicks into place.
6. Verify the light is stable and facing forward.

Video Installation Guide

3. Operating Instructions

Power On/Off & Mode Switching

• Power On/Off: Long press the power button for 1 second to turn the device on or off.
• Mode Switching: Once powered on, a single click of the power button will cycle through the 8 available lighting modes: Intelligent mode, Strong light, Low beam, High beam, Medium light, Weak light, Explosive Flash, and SOS.

Intelligent Sensing Mode

The LIG005 features a built-in light-sensitive chip and vibration sensor for intelligent operation:

• Automatic On/Off: If the light is statically placed for 45 seconds, it will automatically turn off. Upon detecting motion, it will automatically turn back on.
• Automatic Brightness Adjustment: In intelligent mode, the light automatically adjusts its brightness based on ambient light conditions. It will turn off in bright daylight, switch to weak light in the evening, and strong light at night.

Battery Level Indicator

In standby mode, click the power button to display the current battery level:

• Green Light: Above 50-100% charge
• Red Light: Between 25% and 50% charge
• Flashing Red Light: Below 1-25% power

Power Bank Function

The LIG005 can be used as a power bank to charge other devices, such as mobile phones, via its Type-C port. Simply connect your device to the light using a compatible cable.

4. Maintenance

To ensure the longevity and optimal performance of your NEWBOLER LIG005 bicycle light, follow these maintenance guidelines:

• Cleaning: Wipe the light with a soft, damp cloth to remove dirt and debris. Avoid using abrasive cleaners or solvents that could damage the aluminum alloy body or lens.
• Water Resistance: The light has an IPX6 waterproof rating, meaning it is protected against powerful water jets. It can withstand rain and splashes, but it should not be submerged in water or soaked for prolonged periods. After riding in wet conditions, ensure the charging port cover is securely closed and allow the light to air dry completely.
• Charging: Always use the provided Type-C cable or a certified equivalent for charging. Avoid overcharging or completely draining the battery to prolong its lifespan.
• Storage: When not in use for extended periods, store the light in a cool, dry place. Charge the battery periodically (e.g., every 3-6 months) to prevent deep discharge.
• Inspection: Regularly check the mounting bracket for any signs of wear or damage. Ensure all screws are tight to prevent movement during rides.

5. Troubleshooting

• Light not turning on: Ensure the battery is charged. Connect the light to a power source using the Type-C cable and check the battery indicator.
• Light flickering or dim: This may indicate a low battery. Recharge the light fully.
• Mount feels loose: The connection to the mount might not be perfectly centered, causing slight movement. Tighten the mounting screws and knob more firmly to secure the light.
• Light heats up when stationary: It is normal for the aluminum alloy body to dissipate heat, especially on higher brightness modes. If you are stopped for some time, the light may feel warm. This is part of its design for efficient heat management.
• Intelligent mode not working as expected: Ensure the light sensor is clean and unobstructed. Test the mode in different lighting conditions to observe its automatic adjustments.

6. User Tips

• Mount Stability: If you experience any movement with the light on its mount, try tightening the screws and the knob on the bracket even more. A secure fit is crucial for rough riding.
• Beam Angle: The LIG005 provides a powerful beam. When riding, especially in urban areas, be mindful of your beam angle to avoid dazzling oncoming pedestrians or cyclists. Adjust the light downwards slightly if necessary.
• Power Bank Convenience: Utilize the power bank feature for emergency charging of your smartphone or other USB-powered devices during long rides. This can significantly reduce worries about phone battery life.
• Intelligent Mode for Efficiency: Leverage the intelligent sensing mode for optimal battery life and convenience. The light will automatically adjust to ambient conditions, saving power when not needed and providing strong illumination when dark.
• Night Riding: This light is highly effective for night riding, providing satisfactory illumination at good distances across all its modes.

7. Warranty & Support

For detailed warranty information and customer support, please refer to the official NEWBOLER documentation or contact your retailer. A comprehensive user manual in PDF format is available for download from the product page or by clicking here.