JIKONG JK-BD6A8S10P

Contents

JIKONG Smart BMS BD6A8S10P User Manual

Battery Active Balancing Protection Board

1. Introduction

The JIKONG Smart BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates advanced features such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote functionality. This BMS is compatible with LiFePO4, Li-ion, and LTO battery types.

Utilizing energy transfer active balancing technology, the BMS achieves a continuous balance current of up to 1A, ensuring battery consistency, extending battery range, and delaying battery aging. It supports mobile APP control for Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. Its compact size and comprehensive functionality make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

JIKONG Smart BMS BD6A8S10P main product image
JIKONG Smart BMS BD6A8S10P
Application scenarios for JIKONG BMS
Wide range of application scenarios including E-bike, Electric Tricycle, Forklift, Industrial Drone, RV Energy Storage, and Power Bank.

2. Specifications

2.1. General Specifications

FeatureDescription
Brand NameJIKONG
TypeLIFEPO4/Li-ion/LTO Battery BMS
Usage ScenarioPower BMS
Handware or SmartSMART BMS
Balance FunctionActive Balanced BMS
Charge and Discharge PortCommon Port BMS
CertificationCE, FCC, RoHS
FunctionsOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection

2.2. Basic Parameters (Model JK-BD6A8S10P)

ParameterValueUnit
Supply Voltage7.5-36V
Operating Power Consumption<900mW
Operating Temperature-30 to 70°C
Max. Number of Collection Strings8String
Max. Balancing Current1A
Max. Charging Current100A
Max. Discharge Current100A
Max. Instantaneous Current200A
Max. Internal Loop Resistance0.8mΩ
Protective Plate Size153.9 × 107 × 17.6mm
Finished Weight411g

2.3. Default Protection Parameters (Example for Li-ion)

ParameterLi-ion DefaultUnit
Balancing Initial Voltage3V
Unit Overcharge Voltage4.2V
Unit Undervoltage Protection2.82V
Charge Overcurrent Protection Delay30S
Discharge Overcurrent Protection Delay300S
Short-circuit Protection Delay1500uS
Charging Overtemperature Protection70°C
Charging Low Temperature Protection-20°C
MOS Overtemperature Protection100°C

For detailed default parameters for LiFePO4 and LTO batteries, please refer to the full PDF manual.

JIKONG BMS product dimensions diagram
Product dimensions for the JIKONG BMS.

3. Setup

3.1. Package Contents

Before installation, please verify that all components are present:

  • BMS Unit (x1)
  • NTC Temperature Sensor (400mm) (x1)
  • Balance Wires (750mm) (x1)
  • Switch (500mm) (x1)
  • M6 Screws (x2)
  • Packing Box (x1)
JIKONG BMS packing list
Contents of the JIKONG BMS package.

3.2. Wiring Diagram and Installation

The JIKONG BMS is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure correct connections to prevent damage.

  1. Pre-installation Check: Before powering on the protection board, ensure that the balance cables are properly connected to each cell and that the P- (load/charger negative) and B- (battery negative) terminals are correctly wired. Verify that the protection board is securely fixed to the battery core. Incorrect connections can lead to abnormal operation or damage.
  2. Connect Balance Wires: Connect the balance wires to the corresponding battery cells (B1, B2, B3... B8) and to the BMS unit.
  3. Connect Main Power Wires: Connect the main negative terminal of the battery pack to the B- terminal on the BMS. Connect the main positive terminal of the battery pack to the B+ terminal (usually via the charger/load).
  4. Connect Load/Charger: Connect your load and charger to the P- terminal of the BMS.
  5. Optional Connections: If using, connect the NTC temperature sensor, switch, GPS module, or display interface to their respective ports on the BMS as defined in the interface definition section of the full manual.
JIKONG BMS wiring diagram
Typical wiring diagram for the JIKONG BMS. Ensure all connections are made correctly.

3.3. Device Activation

The BMS does not have a physical power-on switch. It is designed for charging activation. After the battery assembly is complete, connect a charger (with a voltage 2V higher than the battery voltage) to activate the protection board. Alternatively, if you have an optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.

3.4. APP Installation

The mobile APP for the JIKONG Smart BMS supports Android (version 7 minimum) and iOS operating systems. You can download the APP by scanning the QR code below:

JIKONG BMS APP QR code
Scan this QR code to download the JIKONG BMS mobile APP.

4. Operating Instructions

The JIKONG Smart BMS offers a range of functions accessible via the mobile APP and its various interfaces.

JIKONG BMS APP communication interface
JIKONG BMS APP interface showing various settings and monitoring options.

4.1. Active Equalization

The active balancing function ensures that all cells in the battery pack maintain consistent voltage levels. You can configure the balance trigger pressure difference (in mV) within the APP's parameter settings. When the voltage difference between any two cells exceeds this set value, balancing automatically begins. It stops when the difference falls below the set value. The default balance current is 1A, but it can be adjusted based on your battery's capacity (recommended not to exceed 0.2C). If not needed, the balancing function can be turned off in the APP.

4.2. Protection Functions

The BMS provides comprehensive protection features to safeguard your battery pack:

  • Overcharge Protection: Prevents cells from being overcharged by shutting off charging when a cell's voltage exceeds the set overcharge protection voltage. Charging resumes when all cell voltages drop below the recovery voltage.
  • Undervoltage Protection: Protects cells from over-discharge by cutting off discharge when a cell's voltage falls below the set undervoltage protection voltage. Discharge resumes when all cell voltages rise above the recovery voltage. The BMS will automatically shut down if any cell voltage drops below the automatic shutdown voltage.
  • Overcurrent Protection (Charge/Discharge): Monitors charging and discharging currents. If the current exceeds the set continuous current for a specified delay, the BMS will trigger protection and cut off the current. It will resume after the overcurrent release time. (Note: Max continuous discharge current should not exceed 100A).
  • Overtemperature Protection (Charge/Discharge): Shuts off charging or discharging if the battery temperature exceeds the set overtemperature limit. Operation resumes when the temperature falls below the recovery threshold.
  • Low Temperature Protection (Charge): Prevents charging at dangerously low temperatures by cutting off charging if the battery temperature drops below the set low temperature limit. Charging resumes when the temperature rises above the recovery threshold.
  • Short Circuit Protection: Automatically detects and protects against short circuits. The delay and recovery time for short circuit protection can be configured in the APP.

4.3. Optional Features and Interfaces

The BMS supports several optional features and interfaces:

  • GPS Interface: Allows connection of a GPS device for battery location tracking.
  • Display Interface: Supports an external display screen for convenient monitoring of battery information.
  • Heating Function: An optional feature (4A heating current) that uses a resistance heater or heating film to warm the battery at low temperatures, preventing performance degradation. This can be controlled via the APP.
  • Alarm Function: Provides external alerts when security risks like overtemperature, overcharge, or over-discharge are detected.
  • Battery Parallel Function: Supports parallel connection of battery packs, requiring synchronous use with parallel modules and disabling the 'charging current limiting' function in the APP.
  • Discharge Precharge Function: An optional feature with a default precharge time of 5 seconds, configurable via the APP.
  • Intelligent Sleep: A standard function that puts the BMS into a low-power standby mode if charging/discharging current is less than 1A for 26 consecutive hours, reducing self-consumption. It can be reactivated by pressing a button or connecting a charger.
  • Communication Functions (CAN/RS485): Optional interfaces for advanced communication protocols. Address and protocol settings can be configured via the APP.
JIKONG BMS rich interface icons
Icons representing various communication modes and functions: CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer.
JIKONG BMS functional characteristics
Key functional characteristics including LED Bluetooth status, APP remote operation, voltage/current acquisition, and various protection features.

4.4. Emergency Switch

The BMS includes a standard emergency switch function. If issues such as over-temperature, over-discharge, over-charge, or cell imbalance occur during normal use, activating the emergency switch in the APP's BMS control page will enable both charging and discharging for 30 minutes. This provides an emergency operational period, even if a single cell reaches its automatic shutdown voltage, to prevent critical situations like being stranded.

5. Maintenance

The JIKONG Smart BMS is designed for reliable operation with minimal maintenance. Keep the unit clean and free from dust and moisture. Regularly check wiring connections for any signs of wear or corrosion. Ensure the mobile APP is updated to the latest version for optimal performance and access to new features.

6. Troubleshooting

Most operational issues are related to protection triggers. The BMS will automatically activate protection functions (e.g., overcharge, undervoltage, overcurrent, overtemperature, short circuit) if parameters exceed safe limits. When a protection is triggered, the BMS will cease the corresponding operation (charging or discharging) until conditions return to normal or the issue is resolved.

  • BMS Not Activating: Ensure all balance cables and main power connections (P- and B-) are correct and secure. Activate the BMS by connecting a charger with a voltage 2V higher than the battery pack, or by using an optional display button.
  • Frequent Protection Triggers: Check your battery parameters in the APP. Adjust protection thresholds if necessary, ensuring they are within safe operating limits for your specific battery chemistry and application. Verify that your charger and load are compatible with the BMS's current ratings.
  • Balancing Issues: Ensure the active balancing function is enabled in the APP and that the trigger voltage difference is set appropriately.
  • APP Connectivity Problems: Ensure Bluetooth is enabled on your mobile device and the BMS. Try restarting both the APP and your device.

For detailed parameter settings and advanced troubleshooting, refer to the comprehensive PDF manual.

7. User Tips

  • Battery Compatibility: Always verify that the BMS model (e.g., 4S-8S) is compatible with the number of series cells in your battery pack (e.g., 5S for 18.5V lithium-ion). The JIKONG BMS supports 4S-8S configurations for LiFePO4, Li-ion, and LTO batteries.
  • Parameter Customization: Take advantage of the mobile APP to fine-tune protection parameters (e.g., overvoltage, undervoltage, current limits) to perfectly match your specific battery pack and application requirements.
  • Cold Weather Operation: If operating in cold environments, consider utilizing the optional heating function to maintain optimal battery performance and prevent low-temperature charging issues.

8. Warranty and Support

For detailed warranty information, technical support, and further documentation, please refer to the official JIKONG BMS website or the full user manual PDF available at: JIKONG BMS User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.