1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CoolMoon 240 All-in-One (AIO) CPU Water Cooling Kit. Please read this manual thoroughly before installation and keep it for future reference. This AIO liquid cooling system is designed to efficiently dissipate heat from your CPU, ensuring stable performance and a visually appealing setup with its Addressable RGB (ARGB) lighting.
2. Warning & Safety Information
- Do not disassemble or install while powered on. Ensure your computer system is completely powered off and unplugged from the power source before beginning any installation or maintenance.
- Avoid contact between the liquid cooling components and any circuit boards. Liquid spills can cause severe damage to electronic components.
- Operation or modification by non-professionals is prohibited. Improper handling can lead to product damage or personal injury.
3. Product Overview
3.1 Components
The CoolMoon 240 AIO CPU Water Cooling Kit includes the following main components:
- Integrated 240mm Radiator with two 120mm ARGB Fans
- CPU Water Block with integrated pump and ARGB lighting
- Flexible, braided water cooling tubes (380mm length)
- Mounting hardware for various Intel and AMD CPU sockets
- Thermal paste
- IC start line (for initial setup if needed)


3.2 Key Features
- High-Efficiency Cooling: Rapidly reduces CPU temperature for optimal performance.
- Silent Operation: Low-noise design with PWM temperature-controlled fans (800-1900RPM).
- Broad Compatibility: Supports a wide range of Intel (LGA 771, 1150, 1155, 1156, 1356, 1170, 1700, 20XX) and AMD (FM1, FM2/FM2+, AM2+, AM3, AM4, AM5, Strx4) CPU sockets.
- Vibrant ARGB Lighting: Features 5V 3-pin ARGB synchronization for motherboard control (ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock RGB LED) or external controller.
- Durable Construction: Includes a pure copper base for efficient heat transfer, high-density E-shaped fins for enhanced heat dissipation, and a robust water cooling pipe with four-layer protection (black braided net, outer rubber layer, white fiber mesh, internal rubber layer, EPDM + IIR high density polyethylene blend).
- Advanced Pump Design: Equipped with a ceramic bearing/shaft core system, 12 RGB lamp beads, and an 8-stage stator winding motor for efficient and stable performance.
- Pre-filled System: Comes with antifreeze, non-conductive water cooling liquid, vacuum-filled for 99% water storage.



4. Specifications
| Component | Parameter | Value |
|---|---|---|
| General | Type | CPU All In One Liquid Cooling System |
| Model Number | ICEDIAMAND AR240 | |
| Certification | CE | |
| Radiator | Radiator Type | 240 MM |
| Size | 277 x 120 x 27 mm | |
| Main Materials | Aluminum / Copper | |
| Fan (x2) | Size | 120 x 120 x 25 mm |
| Speed | 800-1900 RPM ±10% | |
| Air Volume | 30-65 CFM | |
| Type | PWM ARGB LED Fan | |
| Connector | 4Pin (PWM) + 3pin (ARGB) | |
| Noise Value | ≤ 28.8 dBa | |
| Bearing Type | Hydraulic bearing | |
| Water Cooled Head | Size | 80.3 x 71 x 47 mm |
| Speed | 2500 RPM ±10% | |
| Input Voltage | DC 12V | |
| Noise Value | 30 dBA (max) | |
| Coolant Flow Rate | ≥ 1300 ml/min | |
| Compatibility | Supported CPU Sockets | Intel: LGA 771, 1150, 1155, 1156, 1356, 1170, 1700, 20XX (2011, 2066) AMD: FM1, FM2/FM2+, AM2+, AM3, AM4, AM5, Strx4 |
| RGB Support | A-RGB (5V 3-pin) |


5. Installation Guide
Follow these steps to install your CoolMoon 240 AIO CPU Water Cooling Kit:
- Prepare Your System: Power off your computer completely and unplug it from the power source. Open your computer case to access the motherboard and CPU socket.
- Mount the Radiator: Install the 240mm radiator and fans into an available 240mm fan mount location in your computer case (e.g., top, front, or rear). Ensure proper airflow direction.
- Prepare CPU Socket: Select the appropriate mounting brackets for your CPU socket (Intel or AMD) from the provided hardware. Attach them to the water block.
- Apply Thermal Paste: Clean the surface of your CPU and apply a small amount of thermal paste to the center of the CPU's integrated heat spreader (IHS).
- Mount the Cold Plate: Carefully place the water block (cold plate) onto the CPU, aligning it with the mounting holes. Secure it with the appropriate screws and backplate (if required by your socket type). Tighten screws evenly in a cross pattern until snug.
- Connect Tubing: Ensure the coolant tubing is connected securely to the water block and radiator. The system is pre-filled, so no additional liquid handling is required.
- Connect Power and ARGB Cables:
- Connect the 4-pin PWM fan cables to your motherboard's CPU_FAN or AIO_PUMP headers.
- Connect the 5V 3-pin ARGB cables from the fans and water block to your motherboard's 5V ARGB header for software control.
- If your motherboard does not support 5V ARGB synchronization, use the provided external controller to manage the lighting effects.
- Cable Management: Route all cables neatly to avoid interference with other components and to improve airflow.
- Initial Startup: Close your computer case, reconnect the power, and power on the system. Verify normal operation upon startup, checking for fan spin, pump activity, and lighting.


6. Operation
6.1 Fan and Pump Control
The fans are PWM (Pulse Width Modulation) controlled, allowing your motherboard to dynamically adjust their speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise. The pump also operates continuously to circulate coolant.

6.2 ARGB Lighting Control
The ARGB lighting on the fans and water block can be controlled in two ways:
- Motherboard Synchronization: If your motherboard has a 5V 3-pin ARGB header, connect the cooler's ARGB cables to it. You can then use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock RGB LED) to customize lighting effects and synchronize them with other components.
- External Controller: If your motherboard lacks a 5V 3-pin ARGB header, use the provided external controller. This controller allows you to manually adjust various lighting modes, colors, and speeds.

7. Maintenance
To ensure the longevity and optimal performance of your AIO cooler, consider the following maintenance tips:
- Environmental Conditions: Avoid operating the system in high-temperature or high-humidity environments.
- Physical Handling: Avoid severe vibration or impact to the cooler or computer case.
- Regular Inspection: Periodically inspect the coolant tubing for any signs of leaks, kinks, or damage. Ensure all connections are secure.
- Dust Cleaning: Regularly clean dust from the radiator fins and fans using compressed air or a soft brush to maintain efficient heat dissipation.
8. Troubleshooting (FAQs)
- Q: What should I do if the liquid cooling system fails to operate?
- A: First, ensure the computer is powered off and unplugged. Then, check all power connections to the fans and pump. Verify that the pump and fans are receiving power and that the coolant is circulating. Listen for pump noise and observe fan rotation. If issues persist, consult the warranty section for support.
- Q: How should I handle a coolant leak?
- A: Immediately power off the system and unplug it from the power source to prevent further damage. Do not attempt to repair the leak yourself. Contact after-sales service for repair or replacement. Refer to the Warranty and Support section for contact information.
9. User Tips
No specific user tips were available from provided reviews or Q&A. However, general tips for AIO coolers include:
- Ensure your PC case has adequate space for a 240mm radiator and two 120mm fans before purchase.
- When installing the radiator, consider mounting it as high as possible in your case to keep the pump below the highest point of the radiator, which helps prevent air bubbles from accumulating in the pump.
- Utilize your motherboard's fan control software to create a custom fan curve that balances cooling performance and noise levels according to your preference.
10. Warranty and Support
The CoolMoon 240 AIO CPU Water Cooling Kit comes with a 3-year warranty for liquid leakage. For warranty claims, technical support, or after-sales service, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty validation.
For additional information and documents, you may refer to the official user manual PDF: CoolMoon 240 AIO User Manual (PDF).