1. Introduction
The Flytec V802 Pro GPS Bait Boat is an advanced remote-controlled fishing tool designed to enhance your angling experience. It integrates GPS technology with a Beidou intelligent calibration system for precise navigation and bait delivery. This boat features multiple bait hoppers, autopilot capabilities, and a powerful motor, making it ideal for carp fishing and other lure baiting applications. This manual provides detailed instructions for the safe and effective use of your V802 Pro bait boat.
Video: Overview of the Flytec V802 Pro GPS Bait Boat, including assembly and packaging process.
2. Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- Bait Boat (V802 Pro) x 1
- Boat Battery (7.4V, capacity as ordered) x 1
- Antenna x 2
- Remote Control x 1
- Controller Battery Hatch Screw x 1
- Remote Control Hanging Rope x 1
- Remote Control Lever x 2
- USB Cable x 1
- Instruction Manual x 1
- Spare Propeller x 2

Image: Flytec V802 Pro Bait Boat with its remote control, battery, antennas, and other accessories.
3. Product Overview
3.1 Boat Components

Image: Diagram illustrating the main components of the V802 Pro bait boat, including Headlight, Indicator, Switch, Handle, Antenna, Front Dual Silos, Back Dual Silos, Rear Light, Hook, and Motor/Propeller & Waterproof Grass Cover.
3.2 Remote Control Components

Image: Diagram illustrating the main components of the V802 Pro remote control, including Antenna, Lighting Button, Battery Indicator, Left Joystick, Front Left Silo, Switch, Back Left Silo, Calibration, Cruise, Original, Delete, Fishing Ground, Right Joystick, Front Right Silo, Back Right Silo, OK, Up, Left, Right, and Down buttons.
4. Setup Guide
4.1 Battery Installation and Charging
- Boat Battery: Open the battery compartment on the bait boat. Connect the boat battery (7.4V Li-ion) to the boat's power connector. Securely place the battery(ies) in the compartment. The boat features dual battery compartments, allowing for two batteries (e.g., 12000mAh each) to be installed simultaneously for extended operation.
- Remote Control Battery: Install 4xAA batteries (not included) into the remote control's battery compartment. Secure the battery hatch with the provided screw.
- Charging: Use the provided USB cable to charge the boat battery. Connect the USB cable to a suitable USB power adapter (not included). The charging time varies by battery capacity: 5200mAh (6 hours), 12000mAh (8 hours), 18000mAh (10 hours). Ensure the battery is fully charged before first use.

Image: The dual battery compartment of the V802 Pro bait boat, capable of holding two large 12000mAh batteries for extended use.
4.2 Antenna Installation
Screw the two antennas onto their respective ports on the bait boat. Ensure they are securely fastened for optimal signal transmission and reception.
4.3 Initial Power On and Pairing
- Turn on the bait boat using the main power switch.
- Turn on the remote control. The remote and boat should automatically pair. If not, refer to the remote control section for manual pairing instructions (if available in the full manual).
5. Operating Instructions
5.1 Basic Controls
Use the joysticks on the remote control for basic movement:
- Left Joystick: Controls forward/backward movement and left/right turning.
- Right Joystick: Typically controls bait hopper release (refer to section 5.4).
5.2 Fixed Speed Cruise Mode
To activate fixed speed cruise mode:
- Before sailing, push both joysticks forward for 5 seconds.
- The boat will enter fixed speed cruise mode, maintaining a straight course at a constant speed.
- To exit fixed speed cruise mode, push both joysticks backward.

Image: Visual guide on how to activate and deactivate fixed speed cruise mode using the remote control joysticks.
5.3 GPS Navigation and Fixed-Point Baiting
The V802 Pro features a Beidou intelligent calibration system and multi-satellite hybrid engine positioning (GPS L1, Galileo E1, G1SBAS L1, GLONASS, QZSS L1, BEIDOU B1) for accurate positioning within 1 meter.
- Setting Fishing Grounds and Points: The system allows you to set up to 4 fishing grounds and 160 positioning points. Refer to the remote control diagram for specific buttons (e.g., 'FISHING GROUND' button) to manage these points.
- Automatic Navigation: The boat can navigate automatically from a starting point to a target point to make a nest.
- One-Click Return: Use the 'ORIGINAL' button on the remote control for one-click return to the starting point.

Image: Illustration of the multi-satellite hybrid engine positioning system, highlighting compatibility with various GPS systems for high accuracy.

Image: Visual explanation of fixed-point baiting and automatic return features, including 160 positioning points and various return modes.

Image: Illustration demonstrating the ability to customize fishing grounds and switch between fixed points freely.
5.4 Bait Release
The boat is equipped with four independent hoppers, allowing for precise and controlled bait delivery. The maximum bait load capacity is 3kg (6.6lbs).
- Use the dedicated buttons or joystick controls on the remote (e.g., 'FRONT LEFT SILO', 'FRONT RIGHT SILO', 'BACK LEFT SILO', 'BACK RIGHT SILO') to independently open and close each hopper.
- You can load various types of bait, including corn, bait particles, and mixed bait.

Image: The V802 Pro bait boat demonstrating the release of bait from its independent hoppers.

Image: The four independent silos of the bait boat, capable of holding up to 3kg of various baits like corn, bait particles, and mixed bait.
5.5 Automatic Return Functions
The boat is equipped with several intelligent return functions for safety:
- Low Battery Return: When the boat's battery is low, it will automatically return to its starting point.
- Out-of-Control Return: If the remote control signal is lost, the boat will automatically return.
- Over-Distance Return: If the boat exceeds the 500-meter control range, it will automatically return to prevent loss.
5.6 Night Fishing Lights
The boat features high-brightness LED lights for night navigation:
- Waterproof Headlight: Provides a broad night fishing view at the front.
- Blue & Red Rear Lights: Automatically change lights according to the signal power status of the boat, providing clear warning signals to enhance safety.
- Two lighting modes: constant on/flashing.

Image: Close-up of the boat's blue and red rear lights, indicating clear visibility and safety features for night operation.
5.7 Fish Finder Compatibility
The V802 Pro bait boat can be upgraded to include a fish finder function. It features a stern hook design that supports the use of a fish finder and a tail compartment snap design to support a hook feed line.

Image: Detail of the stern hook design, illustrating how a lanyard fish finder or a hook trap can be attached for enhanced fishing capabilities.
6. Maintenance
6.1 Cleaning
After each use, especially in saltwater, rinse the boat with fresh water to remove any salt, dirt, or debris. Ensure all compartments are dry before storage. The boat features a seamless hull and fully enclosed waterproof cabin for 5-level wind resistance.

Image: The V802 Pro bait boat demonstrating its waterproof design, featuring a seamless hull and fully enclosed cabin for enhanced durability.
6.2 Propeller Care
The boat uses 10A high current propellers with an anti-winding protective cover. Regularly check the propellers for any entangled weeds, fishing lines, or debris. Clean them carefully to ensure powerful propulsion and long-lasting stability.

Image: Close-up of the boat's powerful propellers, featuring an anti-winding protective cover to prevent entanglement with weeds and debris.
6.3 Battery Storage
Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge batteries to approximately 50% capacity.
7. Troubleshooting
- Boat not responding: Check battery levels in both the boat and remote control. Ensure they are properly installed and charged. Re-pair the remote control if necessary.
- Poor signal/range: Ensure antennas are securely attached and not obstructed. Avoid operating in areas with high electromagnetic interference.
- Boat not moving straight: The built-in gyroscope should automatically correct yaw. If issues persist, perform a calibration as per the remote control instructions (if available).
- Bait hoppers not opening/closing: Check for any obstructions in the hopper mechanism. Ensure the remote control buttons are functioning correctly.
- GPS accuracy issues: Ensure the boat has a clear view of the sky for optimal satellite reception. Avoid operating under dense foliage or near tall structures.
8. Specifications
| Feature | Specification |
|---|---|
| Boat Material | ABS Plastic & Electronic parts |
| Boat Size | 52.7*26.4*50cm (20.75*10.4*19.7inch) |
| Frequency | 2.4Ghz |
| Color | Black/Orange |
| Antenna Quantity | 2 |
| Control Range | 500m |
| Motor Type | 390 Dual Motor |
| Max Sailing Speed | 250m/mins |
| Boat Battery Capacity | 7.4V 5200mAh / 12000mAh / 18000mAh (optional) |
| Control Time | 5200mAh: 2h, 12000mAh: 4h, 18000mAh: 6h |
| Charging Time | 5200mAh: 6h, 12000mAh: 8h, 18000mAh: 10h |
| Bait Loading Capacity | 3000g (6.6lbs) |
| Hopper Quantity | 4 |
| GPS Capacity | 4 fishing grounds, 160 positioning points |
| Fish Finder Function | Can be upgraded to fish finder version |
| Origin | Mainland China |
| Certification | CE |
9. User Tips
- Always perform a range check in an open area before using the boat for the first time or in a new location.
- Familiarize yourself with the remote control layout and functions before deploying the boat with bait.
- When setting GPS points, ensure they are distinct and easily identifiable to avoid confusion during operation.
- Consider carrying spare batteries for extended fishing sessions, especially if using the boat for long periods or in cold weather, which can affect battery life.
- Regularly inspect the propellers and rudder for any damage or obstructions to maintain optimal performance and prevent motor strain.
10. Warranty and Support
For warranty information, please refer to the specific terms and conditions provided at the time of purchase. In case of any issues or technical support needs, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty claims.