Acasis M001

Contents

Acasis USB-C Docking Station for Mac Mini M4/M4 Pro User Manual

Model: M001

Product Overview

The Acasis USB-C Docking Station is designed to expand the capabilities of your Mac Mini M4 or M4 Pro, offering additional storage, versatile connectivity, and multi-display support. It features a dual-bay M.2 NVMe SSD enclosure, high-speed USB-A ports, SD/TF card slots, and DisplayPort outputs.

Acasis USB-C Docking Station for Mac Mini M4/M4 Pro

Figure 1: Acasis USB-C Docking Station with Mac Mini M4/M4 Pro

Product Video Overview

Video 1: Official product overview showcasing features and connectivity.

Setup Instructions

Package Contents

The complete package includes:

  • Dock unit
  • 40Gbps cable
  • Power adapter
  • PD cable
  • Screwdrivers
  • SSD snap
  • Thermal pad
  • User manual (PDF available at Acasis User Manual PDF)

Physical Connection

  1. Align and Place Mac Mini: Carefully align your Mac Mini M4/M4 Pro with the docking station and place it on top, ensuring the computer's switch position is correctly aligned with the docking station's switch.
  2. Connect Cables: Connect the provided 40Gbps cable from the docking station to your Mac Mini. Ensure all necessary display cables (HDMI, DisplayPort) and peripherals are connected to the docking station.
  3. Power Supply: Connect the PD cable to the docking station and then to the power adapter. Plug the power adapter into a wall outlet.
  4. Activate Docking Station: Activate the docking station switch to complete the wiring section.
Diagram of Acasis Docking Station ports and connections

Figure 2: Detailed diagram of the docking station's ports and connections.

M.2 NVMe SSD Installation

Note: The device does not include SSDs. Do not plug or unplug SSDs while the device is powered on.

  1. Remove Bottom Cover: Use a screwdriver to unscrew the bottom cover screws of the docking station.
  2. Insert SSD: Plug in the M.2 NVMe hard disk(s) into the designated slots. Use the provided rubber plug to secure the SSD(s) in place.
  3. Apply Heat Sink: Apply the thermal pad (heat sink sticker) onto the SSD(s) for optimal heat dissipation.
  4. Reinstall Bottom Cover: Install and screw in the bottom cover securely.
Diagram showing SSD installation and compatible sizes

Figure 3: SSD installation process and compatible M.2 NVMe SSD sizes (2230, 2242, 2260, 2280).

Operating Instructions

RAID Mode Operation Guide (MacOS)

The docking station supports software RAID configurations. Please back up your data before setting or changing the RAID array, as this will erase data. The factory default is PM mode.

  1. Access Disk Utility: On your Mac, open 'Disk Utility'.
  2. Select RAID Assistant: In Disk Utility, go to 'File' → 'RAID Assistant'.
  3. Choose RAID Type: Select the desired RAID type (Striped RAID 0, Mirrored RAID 1, or Concatenated JBOD).
  4. Select Disks: Add the hard disks you wish to include in the RAID configuration. Only disks meeting the requirements for the selected RAID type will be displayed.
  5. Set Properties: Configure the name, filesystem format (e.g., Mac OS Extended (Journaled)), and chunk size for the RAID volume.
  6. Confirm Creation: Confirm the creation of the RAID set. This action will permanently erase all data on the selected disks.
  7. Delete RAID Group: To delete a RAID group, select the RAID drives in Disk Utility and choose the option to delete the RAID group.

Note: Group RAID mode is specific to the operating system. MacOS RAID groups are not universally compatible with Windows systems.

Diagram explaining PM, RAID 0, RAID 1, and JBOD modes

Figure 4: Explanation of different RAID array modes and their characteristics.

Multi-Display Setup

The docking station supports dual or triple display configurations, enhancing your multitasking capabilities.

  • Single Display (DP*1): Up to 4K/144Hz
  • Dual Display (DP*2): Up to 4K/60Hz
  • Triple Display (DP*2 + HDMI): Up to 4K/144Hz + 5K/60Hz + 4K/60Hz
Diagram showing triple display setup with Mac Mini and docking station

Figure 5: Example of a triple display setup using the docking station.

Data Transfer

The docking station provides high-speed data transfer for various tasks:

  • USB-A 3.1 Ports: Three USB-A 3.1 ports deliver 10Gbps data transmission speeds for peripherals. A 10GB file transfers in about 12 seconds.
  • SD/TF 4.0 Slots: Professional-grade SD/TF 4.0 slots transfer content at up to 312MB/s for seamless creative workflows.
Image illustrating 40Gbps data transfer speed

Figure 6: High-speed data transfer capability of the docking station.

Maintenance

Efficient Cooling System

The docking station is crafted from aluminum alloy with side vents for optimal heat dissipation. It features two silent cooling fans (approximately 52dB) that activate automatically, maintaining a safe operating temperature of 60°C even during extended use.

Internal view of the docking station showing cooling fans and aluminum construction

Figure 7: Internal design highlighting the cooling system and aluminum alloy material.

Preventing Hard Drive Disconnection After Sleep Mode (MacOS)

To prevent hard drive disconnection after your Mac Mini enters sleep mode, follow these steps:

  1. Click the menu > System Settings.
  2. Go to Lock Screen or Battery/Power Adapter.
  3. Set "Turn display off when inactive" to "Never".
  4. Enable "Prevent automatic sleeping on power adapter when display is off" under Battery → Options or Displays → Advanced. Click "Done".
Screenshot of Mac OS settings to prevent hard drive disconnection after sleep

Figure 8: Mac OS settings to ensure continuous hard drive connection.

Troubleshooting

General Troubleshooting Tips

  • If the monitor doesn’t display or the SSD disconnects, please disconnect other USB devices, use a 65W or higher power adapter, and try replacing the DP cable.
  • You can also unplug and reconnect the PD port and computer-marked port to ensure proper contact.

USB 3.1 Interference with Wi-Fi/Bluetooth

USB 3.1 ports may interfere with 2.4GHz Wi-Fi/Bluetooth signals. To mitigate this:

  1. The device includes a conductive coating on the top surface for better shielding against USB 3.1 interference.
  2. If you notice weak signals or slow speeds, switch your Wi-Fi to the 5GHz band.
  3. Avoid connecting 4x 10Gbps hard drives to 4x USB-A ports simultaneously.
  4. Consider using the RJ45 Ethernet port for wired networking if wireless interference persists.
Diagram showing internal shielding for USB 3.1 interference

Figure 9: Internal shielding design to reduce USB 3.1 interference.

Specifications

FeatureSpecification
Model NumberM001PRO / M001
Compatible PC DevicesMac Mini M4, Mac Mini M4 Pro
Compatible SystemsMacOS
SSD/HDD SlotDual M.2 NVMe (up to 16TB total)
Max SSD Capacity16TB (2x 8TB)
Interface TypeUSB-C HUB
Ports8 (3x USB-A 10Gbps, 2x DisplayPort 4K/60Hz, 1x HDMI 4K/144Hz, 1x SD 4.0, 1x TF 4.0, 1x USB-C 40Gbps Host, 1x PD 30W)
USB-A StandardUSB 3.0 (10Gbps)
Display OutputDual DisplayPort (4K@60Hz), HDMI (4K@144Hz)
Power Delivery (PD)30W (for docking station power)
MaterialAluminum alloy
CoolingDual silent fans, side vents

Drive Read/Write Performance (with Mac Mini M4)

Table of SSD read/write performance in different RAID modes

Figure 10: Test results for read/write speeds of various SSD configurations in different RAID modes.

User Tips

  • For optimal performance and stability, ensure you use a 65W or higher power adapter for the docking station.
  • If you experience display issues, try disconnecting and reconnecting the PD port and the computer-marked port.
  • To prevent data loss, always back up your data before configuring or reconfiguring RAID modes.
  • If using 2.4GHz Wi-Fi/Bluetooth and experiencing interference, consider switching to 5GHz Wi-Fi or using a wired Ethernet connection.

Warranty and Support

The Acasis USB-C Docking Station is covered by a warranty for repair or replacement in case of non-user-related quality defects. For support or warranty claims, please contact the seller or manufacturer directly.

Frequently Asked Questions (FAQ)

1. Why can't the hard drive appear on the computer?

  1. Please check if the hard drive is M.2 NVMe M Key/B+M Key and properly inserted into the slot.
  2. Please check if your hard drive is displayed in "Disk Utility". For Mac OS, type "Disk Utility" in the desktop search bar and press enter.
  3. If the hard drive is brand new, it needs to be formatted and initialized.
    • For Mac OS: After connecting it to the enclosure, a prompt will appear. Right-click "Initialize" to start. Right-click "Erase", and a pop-up window will appear. Right-click "Erase" in the pop-up window to complete SSD initialization.
    • For Windows OS: Right-click on "This PC", go to Manage -> Disk Management -> Initialize Disk. Right-click on the unallocated space, then click "New Simple Volume". Follow the prompts to select "Next" multiple times, then click "Finish".
  4. If the hard disk indicator is not lit, please replace the hard drive (preferably a known good one) to ensure the hard drive is not faulty.

2. Why can't I cast the screen to the monitor?

  1. Check whether the product power indicator is on.
  2. Please ensure that the line connection is stable, and the monitor signal source is set to the corresponding interface.

Cautions

  • Please avoid using the device in high temperature, low temperature, humidity, dusty, and long-term exposure to sunlight.
  • Keep the product out of the reach of children and do not allow children to use the product unsupervised.
  • Do not disassemble or repair the product and accessories without authorization.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.