JGINYUE X99-8D4/2.5G

Contents

JGINYUE X99 Dual CPU Motherboard Set User Manual

Model: X99-8D4/2.5G

Brand: JGINYUE

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JGINYUE X99 Dual CPU Motherboard Set. This high-performance system is designed for demanding server and workstation applications, featuring dual Intel Xeon E5 2680V4 CPUs and 64GB (4x16GB) of DDR4 2400Mhz RAM, along with dual 2.5G network cards and NVMe support.

JGINYUE X99 Dual CPU Motherboard with two E5 2680V4 CPUs and 4x16GB DDR4 2400Mhz RAM modules installed.

Figure 1: JGINYUE X99 Dual CPU Motherboard Set

2. Safety Information

Please read and follow these safety guidelines to prevent damage to the product and ensure personal safety:

  • Always disconnect the power supply before installing or removing any components.
  • Wear an anti-static wrist strap or frequently touch a grounded metal object to discharge static electricity when handling components.
  • Handle the motherboard by its edges to avoid touching sensitive components.
  • Ensure proper ventilation in your system to prevent overheating.
  • Do not expose the product to moisture or extreme temperatures.
  • The motherboard battery (CR2032) may be removed before shipment for safety reasons. Please install a new CR2032 battery if needed.

3. Package Contents

The JGINYUE X99 Dual CPU Motherboard Set includes the following components:

  • 1x JGINYUE X99-8D4/2.5G Dual CPU Motherboard
  • 2x Intel Xeon E5 2680V4 Processors
  • 4x 16GB DDR4 2400Mhz RAM Modules (Total 64GB)
Image showing the bundle options for the motherboard, CPU, and RAM.

Figure 2: Product Bundle Options (This set includes Motherboard + CPU + RAM)

4. Specifications

The JGINYUE X99-8D4/2.5G motherboard features advanced designs for stability and performance:

Diagram illustrating ten upgraded design features of the X99 motherboard, including X99 original dual chip, DDR4x8 memory, 2x M.2 NVMe, 10-layer PCB, 16-phase power, one-key start/restart, metal armor protection slot, Intel 2.5G network card, SATA3.0x10, and code run diagnostics.

Figure 3: Ten Upgraded Designs

Table detailing the JGINYUE X99-8D4/2.5G motherboard parameters, including model, CPU socket, memory slots, frequency, capacity, size, M.2, fan, chipset, SATA, PCIe, USB, power, NIC, power supply, and PS/2 interfaces.

Figure 4: Motherboard Parameters

JGINYUE X99-8D4/2.5G Motherboard Specifications
Feature Specification
ModelX99-8D4/2.5G
CPU SocketLGA2011-3 (Supports E5 V3 series processors; E5 V4 not supported by Chicken Blood BIOS)
Memory SlotsDDR4 * 8 (Supports desktop ECC server memory)
Memory Frequency2133/2400/2666MHz
Max Memory Capacity256G (32G*8)
Form FactorE-ATX 330x300mm
M.2 Interface2 * M.2 NVME protocol
Fan Interface4 pins x 2, 3 pins x 4
ChipsetX99 original chipset
SATA InterfaceSATA3.0 * 10
PCIe Slots3 * PCI-E x16, 2 * PCI-E x1
USB Interface (Rear)4 * USB 3.0, 4 * USB 2.0
USB Interface (Front)1 * USB 3.0, 2 * USB 2.0
Power Supply Interface24Pin + 8Pin + 8Pin
NIC Interface2 * Intel 2.5G network card
Power Design8+8 phase power supply
PCB Thickness10-layer PCB
PS/2 Interface1 * PS/2 keyboard, 1 * PS/2 mouse

5. Setup Guide

This section outlines the steps for installing the motherboard and its components into your system. Refer to Figure 5 for the motherboard layout and connector locations.

Detailed layout diagram of the motherboard showing the location of various ports and connectors, including CPU power, 24-pin power, boot/reboot, PS/2, USB, 2.5G network, audio, PCI-E slots, SATA3.0, and 3-pin connectors.

Figure 5: Motherboard Layout and Connectors

5.1. Motherboard Installation

  1. Ensure your PC case is compatible with E-ATX motherboards (330x300mm).
  2. Install the I/O shield into the rear opening of your PC case.
  3. Carefully align the motherboard with the standoffs in your PC case.
  4. Secure the motherboard with screws, ensuring it is firmly seated.

5.2. CPU Installation (Intel Xeon E5 2680V4)

The motherboard comes with two E5 2680V4 CPUs pre-installed. If you need to re-install or replace them:

  1. Open the CPU socket retention mechanism (lever).
  2. Carefully place the CPU into the socket, aligning the golden triangle on the CPU with the mark on the socket. Do not force it.
  3. Close the retention mechanism to secure the CPU.
  4. Apply a thin, even layer of thermal paste to the CPU heat spreader.
  5. Install the CPU cooler(s) according to the cooler manufacturer's instructions.

Note: The provided BIOS supports E5 V3 series processors. E5 V4 processors are not officially supported by the 'Chicken Blood' BIOS, but are included in this bundle. Ensure compatibility if using different CPUs.

5.3. RAM Installation (DDR4 2400Mhz)

The motherboard supports 8 DDR4 memory slots. The set includes 4x 16GB DDR4 2400Mhz modules.

  1. Open the clips at both ends of the memory slot.
  2. Align the notch on the DDR4 memory module with the key in the memory slot.
  3. Press down firmly on both ends of the memory module until the clips snap into place.
  4. For optimal performance, install memory modules in the recommended dual-channel configuration (refer to your motherboard's specific manual for slot pairing, typically alternating slots).

5.4. Storage Device Installation

5.4.1. M.2 NVMe SSDs

The motherboard has 2 M.2 NVMe slots.

  1. Locate the M.2 slots (refer to Figure 5).
  2. Remove the M.2 standoff screw.
  3. Insert the M.2 SSD into the slot at a 30-degree angle.
  4. Push the SSD down and secure it with the standoff screw.

5.4.2. SATA Drives

The motherboard provides 10 SATA3.0 interfaces.

  1. Connect one end of a SATA data cable to a SATA port on the motherboard.
  2. Connect the other end of the SATA data cable to your SATA HDD/SSD.
  3. Connect a SATA power cable from your power supply to the SATA HDD/SSD.

5.5. PCI-E Card Installation

The motherboard features 3 PCI-E x16 slots and 2 PCI-E x1 slots.

  1. Remove the metal slot cover from your PC case corresponding to the desired PCI-E slot.
  2. Align your PCI-E expansion card with the slot and press down firmly until it is fully seated.
  3. Secure the card with a screw to the PC case.

5.6. Power Connections

Connect the power supply cables to the motherboard:

  • 24-Pin ATX Power Connector: Connect the main 24-pin power cable from your PSU to the 24-pin connector on the motherboard.
  • 8-Pin CPU Power Connectors: Connect two 8-pin CPU power cables (EPS12V) from your PSU to the two 8-pin CPU power connectors on the motherboard (refer to Figure 5).

5.7. Front Panel and Other Connections

Connect the front panel connectors (power button, reset button, HDD LED, power LED, front USB, front audio) to the corresponding headers on the motherboard. Refer to Figure 5 for locations.

  • USB Headers: Connect front panel USB 3.0 and USB 2.0 cables.
  • Audio Header: Connect front panel audio cable.
  • Fan Headers: Connect case fans and CPU cooler fans to the 4-pin and 3-pin fan headers.
  • PS/2 Ports: Connect PS/2 keyboard and mouse to the dedicated ports on the rear I/O.
  • Network Ports: Connect Ethernet cables to the dual Intel 2.5G network card interfaces.

6. Operating Instructions

6.1. First Boot-up

  1. After all components are installed and connected, ensure all power cables are securely plugged in.
  2. Connect your monitor, keyboard, and mouse.
  3. Press the power button on your PC case.
  4. The system should power on, and you should see the BIOS/UEFI splash screen.

6.2. BIOS/UEFI Setup

To enter the BIOS/UEFI setup utility, press the designated key (usually DEL or F2) repeatedly during the boot-up process. In the BIOS, you can configure various system settings, including:

  • Boot order
  • Date and time
  • CPU and memory settings
  • Fan speed control
  • SATA/NVMe mode (AHCI/RAID)

Save changes before exiting the BIOS.

6.3. Operating System Installation

Insert your operating system installation media (USB drive or DVD) and follow the on-screen instructions to install your preferred OS.

7. Maintenance

7.1. Cleaning

  • Regularly clean dust from inside your PC case, especially from fans and heatsinks, using compressed air.
  • Ensure the system is powered off and unplugged before cleaning.
  • Do not use liquid cleaners directly on motherboard components.

7.2. BIOS Updates

Periodically check the manufacturer's website for BIOS updates. BIOS updates can improve system stability, add support for new hardware, or fix bugs. Follow the instructions provided by the manufacturer carefully when performing a BIOS update, as an incorrect update can render the motherboard inoperable.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

Top-down view of the X99-8D4/2.5G motherboard highlighting its dual 2.5G network card and 16-phase power supply, also showing the diagnostic display.

Figure 6: Motherboard with Diagnostic Display

  • No Power: Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected. Check the power supply unit (PSU) and wall outlet.
  • No Display/POST: Check monitor connection. Reseat RAM modules and PCI-E cards. The motherboard features a diagnostic display (refer to Figure 6, item 10 in Figure 3) that shows POST codes. Consult the motherboard manual or online resources for the meaning of specific codes to diagnose boot issues.
  • System Instability/Crashes: Check CPU and RAM temperatures. Ensure all drivers are up to date. Run memory diagnostic tools to check RAM integrity.
  • Operating System Not Booting: Verify boot order in BIOS. Check if the storage drive with the OS is properly connected and detected.
  • Network Connectivity Issues: Ensure Ethernet cables are properly connected. Check network driver installation in the operating system. Verify network settings.

9. User Tips

  • Cooling is Key: With dual CPUs, effective cooling is crucial. Ensure you have adequate airflow in your case and robust CPU coolers for both processors.
  • BIOS Configuration: Take time to explore the BIOS settings. For server applications, optimizing power management and virtualization settings can enhance performance.
  • Driver Installation: Always install the latest drivers for your chipset, network cards, and any other integrated components from the manufacturer's website for optimal performance and stability.
  • CMOS Battery: If the system loses time or BIOS settings, replace the CR2032 CMOS battery.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the seller directly through the platform where the product was purchased. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.