KCEVE KC302DH

Contents

KCEVE KC302DH HDMI + DisplayPort KVM Switch User Manual

Model: KC302DH | Brand: KCEVE

Introduction

The KCEVE KC302DH KVM Switch allows you to control up to three computers using a single set of keyboard, mouse, and two monitors. It supports both HDMI and DisplayPort inputs for video, enabling dual monitor setups with resolutions up to 8K@60Hz (HDMI 2.1) or 8K@30Hz (DP 1.4) / 4K@144Hz. With integrated USB 3.0 ports, you can share USB peripherals like printers, scanners, and USB drives across all connected computers, streamlining your workspace and enhancing productivity.

Package Contents

Please verify that all items are present in your package:

  • 1x KCEVE KC302DH KVM Switch
  • 1x Power Adapter
  • 3x USB 3.0 Data Cables
  • 1x Wired Controller
  • 1x User Manual
KVM Switch and included accessories: power adapter, USB 3.0 cables, wired controller, and user manual.
Figure 1: KVM Switch and Package Contents

Setup Instructions

Before connecting, ensure all computers and monitors are powered off. For optimal performance, use high-quality HDMI 2.1 and DisplayPort 1.4 cables.

  1. Prepare Computers: Each computer (PC1, PC2, PC3) must have one HDMI output and one DisplayPort output available.
  2. Connect Computers to KVM:
    • For each PC, connect its HDMI output to an "INPUT B" port (HDMI) on the KVM.
    • For each PC, connect its DisplayPort output to an "INPUT A" port (DP) on the KVM.
    • For each PC, connect a USB 3.0 data cable from the PC's USB port to a corresponding "USB 3.0 INPUT" port on the KVM.
  3. Connect Monitors to KVM:
    • Connect your first monitor's HDMI input to the "OUT B" (HDMI) port on the KVM.
    • Connect your second monitor's DisplayPort input to the "OUT A" (DP) port on the KVM.
  4. Connect Peripherals: Connect your USB keyboard, mouse, and other USB 3.0 peripherals (e.g., printer, USB drive) to the "USB 3.0" ports on the front panel of the KVM switch.
  5. Connect Power: Plug the provided power adapter into the DC/12V port on the KVM switch and then into a power outlet.
  6. Connect Wired Remote (Optional): If desired, connect the wired remote control to the "Wired Remote" port on the KVM switch.
  7. Power On: Power on the KVM switch using the ON/OFF switch, then power on your monitors and computers.

Important Note:

  • No HDMI and DP cables are provided. You will need a total of 4 HDMI cables and 4 DP cables for a full 3-PC, 2-monitor setup.
  • Ensure your computer has at least one HDMI and one DisplayPort connection before purchase.
  • This KVM switch does NOT support cross output (e.g., Monitor A displaying signal from PC1 while Monitor B displays signal from PC3). Both monitors must display signals from the same selected PC.
Detailed connection diagram for the KVM switch, showing inputs for 3 PCs (HDMI, DP, USB 3.0) and outputs for 2 monitors (HDMI, DP), along with shared USB peripherals.
Figure 2: KVM Switch Connection Diagram
KVM switch setup on a desk, illustrating 3 desktop computers connected to the KVM, sharing two monitors, a keyboard, and a mouse.
Figure 3: Typical 3 PC Dual Monitor Setup

Operating Instructions

The KVM switch offers two primary methods for switching between connected computers:

Switching Between Computers

  • Button Switch: Press the "PC1", "PC2", or "PC3" buttons on the front panel of the KVM switch to select the desired computer. An LED indicator will light up to show the active PC.
  • Wired Control Switch: Use the provided wired remote control to switch between computers. This allows you to hide the KVM switch for a tidier desk.
Image showing the KVM switch with its front panel buttons labeled PC1, PC2, PC3, and a separate wired remote control for switching between computers.
Figure 4: Switching Methods (Button and Wired Remote)

Display Modes

The KVM switch supports various display configurations for your dual monitors:

  • Duplicate Mode (Mirror Displays): The main screen's content is duplicated on the second output screen.
  • Extended Mode: The desktop is extended across both monitors, allowing you to drag windows between them.
  • Splicing Wall Displays: This mode allows for advanced multi-display configurations, often used for video walls or large-scale presentations.
Diagram illustrating three different display modes: Splicing Wall Displays, Extended Displays, and Mirror Displays, all managed by the KVM switch.
Figure 5: Multiple Display Modes

Maintenance

To ensure the longevity and optimal performance of your KCEVE KVM switch, follow these maintenance guidelines:

  • Keep the device in a cool, dry place, away from direct sunlight and heat sources.
  • Avoid exposing the KVM switch to moisture or liquids. In case of spills, immediately disconnect power and allow it to dry completely before re-connecting.
  • Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation around the device to prevent overheating.
  • Periodically check all cable connections to ensure they are secure.

Troubleshooting

If you encounter issues with your KVM switch, please refer to the following common troubleshooting steps:

  • No Display on Monitor(s):
    • Verify all HDMI and DisplayPort cables are securely connected between the computers, KVM, and monitors.
    • Ensure the KVM switch is powered on and the correct PC input is selected.
    • Check if your monitors are set to the correct input source (HDMI/DP).
    • Test monitors and cables directly with a single computer to rule out individual component failure.
  • Incorrect Resolution or Refresh Rate:
    • To achieve 8K resolution (8K@60Hz for HDMI 2.1, 8K@30Hz for DP 1.4), ensure that your monitors, computers, and all connecting cables (HDMI and DisplayPort) fully support 8K specifications. Lower quality cables may limit resolution.
    • Check display settings on your computer to ensure the desired resolution and refresh rate are selected.
  • USB Devices Not Working:
    • Ensure the USB 3.0 data cables are connected from each computer to the KVM's USB INPUT ports.
    • Verify that USB peripherals are securely plugged into the KVM's USB 3.0 ports.
    • Try connecting the USB device directly to the computer to confirm it is functional.
    • Some high-power USB devices may require external power or a powered USB hub.
  • Switching Issues:
    • Ensure the wired remote is properly connected if you are using it.
    • Confirm that the KVM switch has power.
  • Cross Output Not Supported: Remember that this KVM switch does not support displaying Monitor A from one PC and Monitor B from another PC simultaneously. Both monitors must be connected to the currently selected PC.

Specifications

FeatureSpecification
Model NumberKC302DH
BrandKCEVE (AIMOS)
Connector AUSB, DisplayPort (DP), HDMI-Compatible
Connector BDisplayPort (DP), HDMI-Compatible
Max Resolution (HDMI)8K@60Hz (HDMI 2.1)
Max Resolution (DisplayPort)8K@30Hz, 4K@144Hz (DP 1.4)
USB Ports4x USB 3.0 (5Gbps data transfer)
Switching ModesButton Switch, Wired Control
ApplicationComputer, Monitor
Dimensions (L x W x H)160mm x 60mm x 32mm (6.3in x 2.36in x 1.26in)
Power SupplyDC/12V
CertificationCE
Two monitors displaying high-resolution content, with the KVM switch in the foreground, highlighting support for up to 8K60Hz resolution via HDMI 2.1 and DP 1.4.
Figure 6: High Resolution Support
Infographic comparing USB 3.0 (5Gbps) and USB 2.0 (480Mbps) data transfer speeds, with the KVM switch shown below, emphasizing its USB 3.0 capabilities.
Figure 7: USB 3.0 Ultra-fast Data Transfer

User Tips

  • Cable Quality Matters: For resolutions like 4K@144Hz or 8K, investing in certified high-speed HDMI 2.1 and DisplayPort 1.4 cables is crucial to avoid flickering, signal loss, or resolution limitations.
  • Port Compatibility: Double-check that each computer you intend to connect has both an HDMI and a DisplayPort output. This KVM requires both for dual monitor functionality per PC.
  • USB 3.0 Speed: Utilize the USB 3.0 ports for faster data transfer with compatible devices like external hard drives or high-speed flash drives.
  • Tidy Setup: Use the wired remote to place the KVM switch out of sight, helping to keep your desk clean and organized.

Warranty and Support

For warranty information, technical support, or any questions regarding your KCEVE KC302DH KVM Switch, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.