Introduction
This manual provides detailed instructions for the UGREEN Bluetooth 5.2 Transmitter Receiver (Model 35223). This versatile 2-in-1 device allows you to wirelessly transmit audio from non-Bluetooth devices (like TVs, PCs, projectors) to Bluetooth headphones or speakers, or receive Bluetooth audio from your phone/tablet to wired speakers or car stereos. Please read this manual thoroughly before use to ensure proper operation and to maximize your device's performance.
Package Contents
Please check the package for the following items:
- UGREEN Bluetooth 5.2 Transmitter Receiver Unit
- 3.5mm to 2 Male RCA Cable
- 3.5mm Audio Cable
- USB-C Charging Cable
- 3.5mm Male to Male Connector

Product Diagram

- Microphone: For voice input in RX mode.
- USB-C Charging Port: For charging the device.
- 3.5mm Audio Port: For audio input/output.
- Volume Up / Next Song Button: Short press for volume up, long press for next song.
- Volume Down / Previous Song Button: Short press for volume down, long press for previous song.
- TX/RX Switch: Toggles between Transmitter (TX) and Receiver (RX) modes.
- MFB (Multi-Function Button) / Pairing Button: Power on/off, play/pause, answer/end calls, and initiate pairing.
Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Special Feature | 2 IN 1 Transmitter Receiver |
| Color | Black |
| Model Number | 35223 |
| Bluetooth Version | 5.2 |
| Codec | AAC/SBC |
| Battery Capacity | 300mAh |
| Material | Plastic |
| Transmission Distance | 10M / 32.8 FT |
| Battery Life (TX mode) | Max 27 hours |
| Battery Life (RX mode) | Max 25 hours |
| Audio Output | 3.5mm |
Setup
1. Charging the Device
Before first use, fully charge the UGREEN Bluetooth adapter using the provided USB-C charging cable. Connect one end to the device's USB-C port and the other to a standard USB power adapter (not included). The LED indicator will show charging status and turn off when fully charged.
2. Power On/Off
- Power On: Press and hold the MFB (Multi-Function Button) for approximately 3 seconds until the LED indicator lights up.
- Power Off: Press and hold the MFB for approximately 3 seconds until the LED indicator turns off.
3. Mode Selection
Use the TX/RX switch on the side of the device to select the desired mode:
- TX (Transmitter) Mode: To send audio from a non-Bluetooth device to Bluetooth headphones/speakers.
- RX (Receiver) Mode: To receive Bluetooth audio from your phone/tablet to wired speakers/car stereo.
Operating Instructions
Transmitter (TX) Mode
Use this mode to wirelessly stream audio from your TV, PC, projector, or other non-Bluetooth audio sources to your Bluetooth headphones or speakers.
- Switch the device to TX mode.
- Connect the UGREEN adapter to the audio output port (e.g., 3.5mm AUX, RCA) of your non-Bluetooth audio source using the appropriate audio cable (3.5mm audio cable or 3.5mm to 2 Male RCA cable).
- Power on the UGREEN adapter. It will automatically enter pairing mode (LED indicator will flash).
- Put your Bluetooth headphones or speakers into pairing mode.
- The UGREEN adapter will automatically search for and connect to your Bluetooth audio device. Once connected, the LED indicator will remain solid.
- Dual Pairing: To connect a second pair of Bluetooth headphones/speakers, put the second device into pairing mode and then short press the MFB button on the UGREEN adapter. Both devices will now receive audio simultaneously.

Receiver (RX) Mode
Use this mode to enable your wired speakers, car stereo, or soundbar to receive Bluetooth audio from your phone, tablet, or laptop.
- Switch the device to RX mode.
- Connect the UGREEN adapter to the audio input port (e.g., 3.5mm AUX) of your wired speaker, car stereo, or soundbar using the 3.5mm audio cable.
- Power on the UGREEN adapter. It will automatically enter pairing mode (LED indicator will flash).
- Enable Bluetooth on your phone, tablet, or laptop. Search for Bluetooth devices and select "UGREEN" (or similar device name) from the list to pair.
- Once connected, the LED indicator will remain solid. You can now stream audio from your device to your wired audio system.

Controls
- Volume Up: Short press the "Volume Up" button.
- Volume Down: Short press the "Volume Down" button.
- Next Song: Long press the "Volume Up" button.
- Previous Song: Long press the "Volume Down" button.
- Play/Pause: Short press the MFB button.
- Answer/End Call (RX Mode): Short press the MFB button.
Maintenance
To ensure the longevity and optimal performance of your UGREEN Bluetooth adapter, please follow these maintenance guidelines:
- Keep Dry: Avoid exposing the device to moisture, rain, or liquids.
- Clean Gently: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
- Temperature: Store and operate the device within recommended temperature ranges. Avoid extreme heat or cold.
- Avoid Impact: Do not drop, hit, or subject the device to strong impacts.
- No Disassembly: Do not attempt to disassemble, repair, or modify the device yourself. This will void the warranty and may cause damage.
Troubleshooting
If you encounter any issues with your UGREEN Bluetooth adapter, please refer to the following common problems and solutions:
No Sound
- Power/Charge: Ensure the device is powered on and has sufficient battery charge.
- Mode Selection: Verify that the correct mode (TX or RX) is selected using the switch.
- Cable Connection: Check that all audio cables are securely connected to both the adapter and the audio source/receiver.
- Volume Levels: Adjust the volume on both the UGREEN adapter and the connected audio device (headphones, speakers, TV, phone).
- Pairing: Confirm that your Bluetooth devices are successfully paired. If not, re-pair them.
Cannot Pair
- Correct Mode: Ensure the adapter is in the correct mode (TX for transmitting, RX for receiving).
- Pairing Mode: Make sure the adapter is in pairing mode (LED indicator flashing). If not, power cycle the device or long-press the MFB to initiate pairing.
- Proximity: Place the UGREEN adapter and the target Bluetooth device closer to each other (within 1 meter) during pairing.
- Clear Pairings: Clear previous Bluetooth pairings on both the adapter and your other device, then try pairing again.
- Restart Devices: Power off and then power on both the UGREEN adapter and your Bluetooth device.
Short Transmission Distance or Interference
- Obstacles: Reduce physical obstacles (walls, furniture) between the adapter and the connected Bluetooth device.
- Interference: Move away from sources of strong electromagnetic interference (e.g., Wi-Fi routers, microwaves, other Bluetooth devices).
- Range: Ensure devices are within the specified 10-meter (32.8 ft) transmission range.
User Tips
- For optimal performance, ensure the adapter is fully charged before extended use, especially in TX mode for long flights or TV sessions.
- When using in RX mode for car stereos, ensure your car's audio system is set to the correct AUX input.
- If experiencing connection issues, try restarting both the adapter and the connected Bluetooth device.
- The dual pairing feature in TX mode is excellent for sharing audio with a friend or family member without disturbing others.
Warranty and Support
The UGREEN Bluetooth 5.2 Transmitter Receiver (Model 35223) comes with a 1-Year Warranty from the date of purchase.
Warranty Exclusions:
- Damage caused by human factors or misuse.
- Damage resulting from improper operation or failure to follow instructions in this manual.
- Products that are no longer in a resalable condition due to physical damage or alteration.
- Defects not reported before initial use.
For technical support, warranty claims, or any other inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation or the seller's website for specific contact details.