1. Introduction and Safety Guidelines
Thank you for choosing the iScooter W6 Folding Electric Scooter. This manual provides important information on the safe operation, assembly, maintenance, and troubleshooting of your scooter. Please read it thoroughly before your first ride and keep it for future reference.
Safety Disclaimer
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
Always wear a helmet and other protective gear (knee pads, elbow pads) when riding. Ensure you understand and comply with all local laws and regulations regarding electric scooter usage.
2. Package Contents
Carefully unpack your iScooter W6 and check that all items listed below are included and in good condition. If anything is missing or damaged, please contact customer support.

Figure 2.1: Package Contents
- 1 x iScooter W6 Electric Scooter
- 1 x Charger (42V 1.5A)
- 1 x L-type Hexagonal Wrench
- 6 x Screws (including 2 spares)
- 1 x Inflatable Inner Tube
- 1 x Extension Tube
- 1 x User Manual
3. Product Overview
Familiarize yourself with the different parts of your iScooter W6 electric scooter.

Figure 3.1: Labeled Components of the iScooter W6
- Display: Shows real-time speed, riding mode, battery level, etc.
- Throttle: Controls acceleration.
- Headlight: Front illumination for visibility.
- Hanger: For carrying bags or small items.
- Bell: For alerting pedestrians and other riders.
- Brake Lever: Activates the electronic and disc brakes.
- Folding Buckle: Secures the scooter in the folded position.
- Stem: The main vertical shaft connecting the handlebars to the deck.
- Folding Knob: Used to release the folding mechanism.
- Charging Port: Where the charger connects.
- Rear Fender: Protects from splashes.
- Hook: Part of the folding mechanism.
- Taillight & Brake Light: Rear illumination and brake indicator.
- Disc Brake: Rear mechanical braking system.
- Kickstand: For parking the scooter upright.
4. Setup and Initial Charge
4.1 Assembly
Your iScooter W6 comes mostly pre-assembled. You will primarily need to secure the handlebar stem and handlebars.
- Carefully lift the handlebar stem until it clicks into place.
- Use the provided L-type hexagonal wrench and screws to firmly attach the handlebars to the stem. Ensure all screws are tightened securely.
- Check that the folding mechanism is locked properly and the stem is stable.
4.2 Initial Charging
Before your first ride, fully charge the scooter's battery.

Figure 4.1: Battery and Charging Port
- Locate the charging port on the side of the scooter deck.
- Ensure the charging port is clean and dry.
- Connect the charger to the charging port, then plug the charger into a power outlet.
- The indicator light on the charger will typically turn red during charging and green when fully charged.
- Charging time is approximately 5-6 hours. Do not overcharge.
- Disconnect the charger once charging is complete.
5. Operating Instructions
5.1 Power On/Off
- To Power On: Press and hold the power button on the display for a few seconds until the screen illuminates.
- To Power Off: Press and hold the power button again until the display turns off.
5.2 Riding the Scooter
- Place one foot on the deck and push off with the other foot to gain some initial momentum.
- Once moving, gently press the throttle lever to engage the motor.
- Place your other foot on the deck.
- Maintain balance and steer by leaning.
5.3 Speed Modes
The iScooter W6 offers multiple speed modes to suit different riding conditions. You can switch between modes by short-pressing the power button after startup.

Figure 5.1: Speed Mode Demonstration Interface
- Walk Mode: Max Speed 6km/h
- ECO Mode: Max Speed 15km/h
- D Mode: Max Speed 25km/h
- S Mode: Max Speed 35km/h (after speed limit is cracked)
Cracking the Speed Limit
To unlock the full speed potential (35km/h), after turning on the device, hold the brake handle and press the power button 5 times.
5.4 Braking System
The iScooter W6 is equipped with a dual braking system for safety and control.

Figure 5.2: Front Electronic Brake & Rear Wheel Disc Brake
- Front Electronic Brake: Activated by the brake lever, provides responsive stopping power.
- Rear Disc Brake: Also activated by the brake lever, offers strong and efficient braking.
Always apply brakes gently at first, especially at higher speeds, to avoid sudden stops and loss of control.
5.5 LCD Intelligent Riding Display
The LCD display provides essential riding information at a glance.

Figure 5.3: LCD Intelligent Riding Display
Indicators include:
- Real-time Speed
- Speed Unit (km/h or mph)
- Riding Mode (Walk, ECO, D, S)
- Cruise Control status
- App Connection status
- Headlight On indicator
- Motor Overheating warning
- Battery Level
- Error Prompt
5.6 VoltiX Smart APP
Enhance your riding experience with the VoltiX Smart APP.

Figure 5.4: VoltiX APP Interface
The app provides features such as:
- Ride Record
- Cruise Control management
- Detailed Battery Usage information
- Acceleration settings
- Intelligent locking function
Download the VoltiX APP from your smartphone's app store and follow the in-app instructions to connect to your scooter.
6. Folding and Storage
The iScooter W6 features a quick and compact folding design for easy transport and storage.

Figure 6.1: Fast Folding for Portability
6.1 Folding the Scooter
- Ensure the scooter is powered off.
- Locate the folding knob/lever near the base of the handlebar stem.
- Follow the two-step quick folding mechanism: release the safety latch, then pull the folding knob/lever to fold the stem downwards until it locks into place with the rear fender hook.
- Ensure the folding buckle is securely fastened.
6.2 Unfolding the Scooter
- Release the folding buckle from the rear fender.
- Lift the handlebar stem upwards until it clicks into its upright position.
- Ensure the safety latch is engaged and the stem is firmly locked.
6.3 Storage
Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. When storing for extended periods, ensure the battery is charged to about 50-70% and recharge it every 1-2 months to maintain battery health.
7. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your iScooter W6.
7.1 Cleaning
- Wipe the scooter with a damp cloth after each ride. Do not use high-pressure water jets or immerse the scooter in water.
- Avoid using abrasive cleaners that could damage the finish.
7.2 Tires
The scooter features 10-inch wear-resistant pneumatic tires with anti-puncture layers.

Figure 7.1: 10-inch Wear-Resistant Pneumatic Tire Structure
- Regularly check tire pressure and inflate to the recommended PSI (usually indicated on the tire sidewall or in specifications).
- Inspect tires for wear, cuts, or punctures before each ride.
7.3 Brakes
- Periodically check the brake levers and cables for proper tension and function.
- Ensure the disc brake pads are not excessively worn. If they are, they should be replaced by a qualified technician.
7.4 Battery Care
The 36V 7.8Ah battery is managed by a BMS (Battery Management System) for safety.

Figure 7.2: Battery Management System (BMS) Safety Protections
- Avoid completely draining the battery.
- Charge the battery in a well-ventilated area.
- Do not use a charger other than the one provided.
- If the scooter will not be used for an extended period, charge the battery to 50-70% and recharge every 1-2 months.
8. Troubleshooting
This section addresses common issues you might encounter with your iScooter W6.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; Loose connections; Power button malfunction | Charge the battery fully; Check all visible connections; Contact support if issue persists. |
| Motor not engaging/weak power | Low battery; Throttle issue; Overload; Speed limit active | Charge battery; Ensure you push off to gain initial speed; Check rider weight; Crack speed limit if desired (see Section 5.3). |
| Brakes feel loose or ineffective | Brake cable tension; Worn brake pads | Adjust brake cable tension; Inspect and replace brake pads if worn (professional service recommended). |
| Tire loses air quickly | Puncture; Loose valve stem | Inspect tire for punctures and repair/replace inner tube (use provided spare); Tighten valve stem. |
| Display shows an error code | System malfunction | Refer to the specific error code in a more detailed service manual or contact customer support. |
9. Specifications
Detailed technical specifications for the iScooter W6 Folding Electric Scooter.

Figure 9.1: Product Specifications
| Feature | Detail |
|---|---|
| Brand | iScooter |
| Type | Electric Scooter |
| Model | W6 |
| Motor | 500W Front-wheel drive brushless motor |
| Max Load | 120kg |
| Speed Modes | 3 gears: 6/15/25km/h (cracked: 15/25/35km/h) |
| Max Speed | 35km/h |
| Range | 25-30km |
| Battery | 36V 7.8Ah |
| Brake System | Front electronic brake and rear disc brake |
| Tire Type | 10-inch pneumatic tire (wear-resistant, anti-puncture) |
| Charging Time | 5-6 hours |
| Climbing Ability | Max 15° incline |
| Display | LCD Intelligent Riding Display |
| Charger Output | 42V 1.5A |
| Product Weight | 15kg |
| Unfolded Size (L x W x H) | 112 x 49 x 111cm |
| Folded Size (L x W x H) | 112 x 49 x 47cm |
10. User Tips
Here are some general tips to enhance your riding experience and ensure safety:
- Always Wear Protective Gear: A helmet is essential. Consider knee and elbow pads, especially for new riders.
- Check Tire Pressure: Regularly check and maintain the recommended tire pressure for optimal performance and range.
- Familiarize with Controls: Practice accelerating and braking in a safe, open area before riding in traffic.
- Observe Local Regulations: Be aware of and comply with all local laws regarding electric scooter usage, including speed limits and where you can ride.
- Utilize the App: Connect to the VoltiX APP to track your rides, manage settings, and use the intelligent locking feature.
- Ride Defensively: Be aware of your surroundings, anticipate potential hazards, and signal your intentions to others.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.