WiiYii W1

Contents

W1 GPS HUD Speedometer User Manual

Model: W1

Brand: WiiYii

Introduction

Thank you for choosing the WiiYii W1 GPS Head-Up Display (HUD) Speedometer. This device is designed to enhance your driving safety by projecting essential vehicle information directly onto your windshield, allowing you to keep your eyes on the road. The W1 features a high-definition LED display, GPS + Beidou dual-mode chip for accurate speed, and a plug-and-play design for universal compatibility with various vehicle types.

Product Overview

Key Features

  • Big Fonts: Clear and easy-to-read display.
  • Plug & Play: Simple installation without complex wiring.
  • Non-skip Speed: Utilizes 10 Hz high refresh rate GPS + Beidou dual-mode chip for quick and accurate speed updates without delay.
  • Universal Compatibility: Works with all models, including buses, trucks, new energy vehicles, and gas-electric hybrid vehicles.
  • High-Definition LED: Ensures clear visibility day and night.
  • USB Powered: Zero power consumption when the car is turned off, preventing battery drain.
  • Small Size: Compact design for discreet placement on the dashboard.
  • Sunshine Hood: Integrated design to reduce glare in bright conditions.

Packing List

The package includes the following items:

  • 1 x Host (W1 GPS HUD Unit)
  • 1 x 2m USB Cable (Type-C)
  • 1 x Non-slip Mat
  • 1 x Scraper
  • 1 x Reflective Film (for enhanced projection clarity)
WiiYii W1 GPS HUD Speedometer packing list including the main unit, USB cable, non-slip mat, scraper, and reflective film.
Figure 1: Contents of the W1 GPS HUD Speedometer package.

Specifications

AttributeValue
Brand NameWiiYii (also XMSJ)
Model NumberW1
Model NameW1
TypeCombiner HUD, Diagnostic Tool, GPS
Display TypeLCD Widescreen
Screen TypeTFT, OLED, LED
FunctionSpeed, Car ECU display
Warranty2 Year
Place of OriginGuangdong, China / Mainland China
Product NameCar HUD
ColorBlack
VersionLatest version
FeatureScreen Sharing, Smooth response
UsageCar Safe Driving, Digital Speedometer
PerformanceExcellent
CertificationCE/ROHS/FCC/ISO9001
High-concerned chemicalNone

Setup Guide

The W1 GPS HUD Speedometer is designed for easy plug-and-play installation. Follow these steps to set up your device:

  1. Choose Placement: Select a suitable flat surface on your dashboard, typically near the windshield, where the projected display will be clearly visible without obstructing your view of the road.
  2. Secure the Device: Place the provided non-slip mat on the chosen dashboard area. Then, place the W1 HUD unit on the non-slip mat to prevent it from moving during driving.
  3. Apply Reflective Film (Optional but Recommended):
    • Clean the area of your windshield where the HUD will project the information.
    • Carefully peel off the protective layer from the reflective film.
    • Apply the film to the cleaned windshield area, ensuring it is smooth and free of air bubbles. Use the provided scraper to remove any bubbles. This film enhances the clarity and visibility of the projected display, especially in bright sunlight.
  4. Connect Power: Connect the provided USB cable to the W1 HUD unit and plug the other end into a USB power source in your vehicle (e.g., a car charger, USB port). The device is designed for 0 power consumption when the car is off, so it will not drain your battery.
  5. Power On: Once connected, the HUD unit will power on automatically with your vehicle's ignition. It will begin searching for GPS and Beidou satellite signals to acquire speed data.
Image showing the W1 GPS HUD Speedometer and its universal compatibility with various vehicle types, emphasizing USB cable connection.
Figure 2: Universal compatibility and USB connection for the W1 HUD.
Diagram illustrating the USB power connection for the W1 GPS HUD, highlighting zero power consumption when the car is off.
Figure 3: USB power connection and power-saving feature.

Operating Instructions

The W1 GPS HUD Speedometer operates automatically once powered on. Here's what to expect:

  1. Automatic Power On/Off: The device will automatically turn on when your vehicle starts and turn off when the vehicle is shut down, ensuring no battery drain.
  2. GPS Signal Acquisition: Upon startup, the HUD will search for GPS and Beidou satellite signals. This may take a few moments, especially in areas with limited satellite visibility (e.g., tunnels, dense urban areas). Once signals are acquired, the speed display will become active.
  3. Speed Display: Your current driving speed will be projected onto the windshield in large, clear digits. The 10 Hz refresh rate ensures that the speed displayed is always current and accurate, without noticeable lag.
  4. Day and Night Visibility: The high-definition LED display is designed to be clearly visible in various lighting conditions, from bright daylight to complete darkness.
Comparison image showing the W1 GPS HUD display clarity during day and night driving conditions.
Figure 4: Day and night visibility of the HUD display.
Image illustrating the GPS + Beidou dual chipsets and 10 Hz refresh rate for accurate and non-skipping speed display.
Figure 5: GPS + Beidou dual chipsets for high-accuracy speed.

Product Demonstration Video

Video 1: Demonstration of the W1 GPS HUD Speedometer in action, showing real-time speed projection on the windshield.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the HUD unit. Do not use abrasive cleaners or solvents.
  • Reflective Film: If the reflective film becomes dirty or damaged, gently clean it with a soft, damp cloth. If necessary, it can be carefully removed and replaced.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

No display after connecting power:
  • Ensure the USB cable is securely connected to both the HUD unit and the vehicle's power source.
  • Check if the vehicle's USB port or cigarette lighter adapter is functioning correctly.
  • Verify that the vehicle's ignition is on.
Inaccurate or no speed display:
  • Ensure the HUD unit has a clear view of the sky to receive GPS and Beidou satellite signals. Obstructions like tunnels, tall buildings, or heavy tree cover can interfere with signal reception.
  • Wait a few moments after starting the vehicle for the device to acquire satellite signals.
  • If the issue persists, try repositioning the HUD unit on the dashboard.
Display is too dim or too bright:
  • The W1 HUD typically has automatic brightness adjustment. Ensure the light sensor (if present, usually a small dot on the unit) is not obstructed.
  • If the reflective film is not used, the display might appear dimmer in bright sunlight. Applying the film can significantly improve visibility.

User Tips

  • For optimal clarity, especially in direct sunlight, ensure the reflective film is properly applied to your windshield.
  • Position the HUD unit carefully to avoid any obstruction of your driving view.
  • The "Plug & Play" nature means you can easily move the device between compatible vehicles if needed.

Warranty and Support

The WiiYii W1 GPS HUD Speedometer comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact your retailer or the manufacturer directly.

An electronic version of the user manual (PDF) is available for download: WiiYii W1 User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.