QJMOTOR SRK250 RS QJ250GS-29E

Contents

Instruction Manual

Footrests for QJMOTOR SRK250 RS QJ250GS-29E

Model: SRK250 RS QJ250GS-29E

Brand: QJMOTOR

1. Introduction

This manual provides essential information for the proper installation, use, and maintenance of the QJMOTOR SRK250 RS QJ250GS-29E motorcycle footrests. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

This product is a specialized accessory designed for motorcycles. Ensure compatibility with your specific motorcycle model, year, and displacement before proceeding with installation.

2. Safety & Warnings

WARNING: Improper installation or use of this product can lead to loss of control, crashes, serious injury, or death.

  • Only qualified technicians should install this product.
  • Always wear a helmet and appropriate protective gear when operating the motorcycle.
  • Check all motorcycle functions thoroughly before riding after installation.
  • Do not overload the motorcycle or exceed safe speeds.
  • Replace worn or damaged parts immediately to prevent accidents.
  • Be aware of the risk of fire, explosion, or electric shock associated with motorcycle components.
  • Improper installation or use may result in loss of control, rollover, personal injury or even death.
  • You must wear a safety helmet and protective equipment when riding, and abide by traffic rules.
  • Speeding, overloading, and dangerous driving are strictly prohibited.

3. Specifications

FeatureDetail
Product NameMotorcycle Footrests
ModelUniversal (Specific to QJMOTOR SRK250 RS QJ250GS-29E)
Applicable ModelsQJMOTOR SRK250 RS, QJ250GS-29E
ManufacturerZhengzhou Tangner Trading Co., Ltd.
Batch Number2025.12.12
OriginMainland China
High-concerned chemicalNone
Package Length18 cm
Package Width15 cm
Package Height10 cm
Package Weight0.5 kg

Note: This product must comply with all applicable safety and regulatory requirements in the market where it is sold.

4. Setup (Installation)

4.1. Product Application Scope

  • This product is a special accessory for motorcycles. Please use it strictly in accordance with the applicable model, specification, and model.
  • Before installation, please confirm that the model year, displacement, and size completely match this accessory. If it does not match, installation is prohibited.

4.2. Pre-Installation Checklist

  • Before installation, turn off the engine, disconnect the power supply, and ensure that the vehicle is turned off, cooled, and stable.
  • Check whether the accessories are intact and free of damage, deformation, cracks, or missing parts.
  • It is highly recommended that installation be performed by professional maintenance personnel. Unprofessional operation may cause malfunction or danger.

4.3. Installation Steps

  1. Install the footrests according to the correct steps, using qualified tools.
  2. Tighten all screws to the specified torque.

4.4. Post-Installation Check

After installation is complete, you must verify the following:

  • Brakes, steering, lights, tires, and other relevant functions operate normally.
  • There is no looseness, abnormal noise, interference, oil leakage, or electricity leakage.
  • The motorcycle can be used only after all debugging is confirmed to be normal.

Visual Reference for Footrest Types:

Left front footrest for QJMOTOR SRK250 RS QJ250GS-29E
Figure 1: Left Front Footrest
Right front footrest for QJMOTOR SRK250 RS QJ250GS-29E
Figure 2: Right Front Footrest
Rear right footrest for QJMOTOR SRK250 RS QJ250GS-29E
Figure 3: Rear Right Footrest
Rear left footrest for QJMOTOR SRK250 RS QJ250GS-29E
Figure 4: Rear Left Footrest

5. Operating & Maintenance

5.1. Initial Use

  • It is recommended that new accessories be run in at low speed before driving normally.

5.2. Regular Inspection

Perform regular checks to ensure the longevity and safety of the footrests:

  • Verify that all screws and fasteners are tight and secure.
  • Inspect for any signs of wear, cracks, aging, or deformation.
  • Check the status of key parts such as brakes, lights, and tires, as they may be affected by footrest condition.

5.3. Cleaning and Care

  • Keep accessories clean.
  • Avoid long-term exposure to direct sunlight, rain, oil, and corrosive substances.

6. Troubleshooting

  • If an accessory appears abnormal (e.g., unusual noise, looseness, damage), it must be stopped immediately and either replaced or repaired by a qualified technician.
  • Ensure all installation steps and post-installation checks are followed to prevent common issues.

6.1. Prohibited Actions

To prevent malfunctions and ensure safety, the following actions are prohibited:

  • Modification, unauthorized disassembly, or mixing of mismatched parts.
  • Using damaged, expired, or inferior quality accessories.
  • Operating the motorcycle without passing a thorough inspection after installation or repair.

7. User Tips

Based on general user experience, always prioritize safety and professional installation for motorcycle accessories. While no specific user tips were available from provided reviews or Q&A, adhering to the manufacturer's guidelines for installation and maintenance is crucial for optimal performance and safety.

8. Warranty & Support

For product support, warranty claims, or technical assistance, please contact the manufacturer or their authorized representative:

  • Manufacturer: Zhengzhou Tangner Trading Co., Ltd.
  • Manufacturer Address: Room 2, Building 3, No. 69 Hejiang Road, Erqi District, Zhengzhou City Yuan 15th floor east door
  • Manufacturer Email: yangnanxiang@163.com
  • Manufacturer Telephone: +86-18637168189
  • EU Authorized Representative: eVatmaster Consulting GmbH
  • EU Representative Address: Bettinastr. 30, 60325
  • EU Representative Email: contact@evatmaster.com
  • EU Representative Telephone: +49-6995179070

A detailed user manual in PDF format is available for download. This document contains additional information regarding product compliance and usage guidelines. You can typically find this on the product's support page or by contacting the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.