SMAEL 8112

Contents

SMAEL 8112 Dual Display Digital Sport Watch User Manual

Model: 8112

1. Product Overview

The SMAEL 8112 is a versatile dual display digital sport watch designed for an active lifestyle. It combines quartz and digital movements, offering multiple features such as alarm, stopwatch, LED night light, and water resistance up to 5ATM.

SMAEL 8112 watch in yellow, showcasing its digital display and robust design.

Figure 1: SMAEL 8112 Dual Display Digital Sport Watch (Yellow variant)

2. Key Features

  • Dual Display: Combines Quartz and Digital movements.
  • Water Resistance: 5ATM (50 meters), suitable for hand washing, face washing, and rain.
  • Shock Resistant: Designed with seismic and anti-drop measures.
  • LED Night Light: Soft, non-blinding light for clear visibility in low light conditions.
  • Multi-Functionality: Stopwatch, Alarm, Auto Date, Chronograph, Complete Calendar, Week Display, Dual Time Display, Countdown, Chime at the correct time.
  • Durable Materials: Plastic case, Hardlex/Plexiglass dial window, Silicone/Silica gel band, Stainless Steel back.

3. Watch Components and Buttons

Diagram showing the functions of the SMAEL 8112 watch buttons: Light, Mode Key, Start/Stop, Adjust Key, Reset, Date Display, Time Display, Stopwatch Display.

Figure 2: Watch Functions and Button Layout

The watch features five main buttons:

  • LIGHT: Activates the LED night light display.
  • MODE KEY: Cycles through different modes (Time, Alarm, Stopwatch, Countdown, Dual Time).
  • START/STOP: Used to start and stop functions like the stopwatch or countdown.
  • ADJUST KEY: Used to adjust settings within a selected mode.
  • RESET: Resets functions like the stopwatch or countdown, or confirms settings.

4. Setup Instructions

4.1 Initial Power On

Your watch comes with a pre-installed battery. It should be ready for use upon receipt. If the display is blank, press any button to check if it activates. If not, the battery may need replacement (see Maintenance section).

4.2 Setting Time and Date

  1. Enter Time Setting Mode: Press the MODE KEY repeatedly until the time setting interface is displayed (usually indicated by flashing digits).
  2. Select Item to Adjust: Use the RESET button to cycle through the items you wish to set (e.g., seconds, hour, minute, year, month, day).
  3. Adjust Value: Use the ADJUST KEY to increase or decrease the selected value.
  4. Confirm Setting: Once all desired values are set, press the MODE KEY again to exit the setting mode and save changes.

4.3 Setting Alarm

  1. Enter Alarm Mode: Press the MODE KEY until the alarm setting interface appears.
  2. Select Hour/Minute: Use the RESET button to toggle between setting the hour and minute.
  3. Adjust Alarm Time: Use the ADJUST KEY to set the desired alarm hour and minute.
  4. Activate/Deactivate Alarm: While in alarm mode, use the START/STOP button to turn the alarm ON or OFF. An alarm icon will typically appear on the display when activated.
  5. Exit Alarm Mode: Press the MODE KEY to return to the normal time display.

5. Operating Instructions

5.1 Using the LED Night Light

Press the LIGHT button to illuminate the digital display. The soft light is designed to be non-blinding and allows for accurate time reading in dark environments.

Close-up of the SMAEL 8112 watch display with the LED night light activated, showing clear digits in a dark setting.

Figure 3: LED Night Light Display

5.2 Stopwatch Function

  1. Enter Stopwatch Mode: Press the MODE KEY until the stopwatch display appears (usually showing '00:00:00').
  2. Start/Stop: Press the START/STOP button to begin timing. Press it again to pause.
  3. Reset: While paused, press the RESET button to clear the stopwatch to zero.
  4. Exit Stopwatch Mode: Press the MODE KEY to return to the normal time display.

5.3 Countdown Timer

The watch includes a countdown timer feature. Refer to the 'MODE KEY' and 'ADJUST KEY' for setting the countdown duration and 'START/STOP' for activation.

5.4 Dual Time Display

This feature allows you to view a second time zone. Use the MODE KEY to navigate to the dual time display and the ADJUST KEY to set the second time zone.

6. Maintenance and Care

6.1 Water Resistance

The SMAEL 8112 watch has a 5ATM water resistance rating. This means it is suitable for daily use, such as washing hands, face, and exposure to rain. It is not recommended for swimming, diving, or prolonged water immersion, especially in hot water or steam, as this can compromise the seals.

SMAEL 8112 watch submerged in water, illustrating its 5ATM waterproof capability.

Figure 4: 5ATM Water Resistance

6.2 Cleaning

  • Case and Band: Wipe the watch case and silicone band with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
  • Dial Window: The Hardlex/Plexiglass dial window is anti-scratch and wear-resistant. Clean with a soft, lint-free cloth. Avoid abrasive materials that could scratch the surface.

6.3 Battery Replacement

The watch uses a long-life battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.

Close-up of the watch's stainless steel back and silicone strap, highlighting the durable materials.

Figure 5: Stainless Steel Back and Silicone Strap

7. Troubleshooting

  • Display is blank or dim: The battery may be low or depleted. Consider professional battery replacement.
  • Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a stated feature for this model). Try pressing the RESET button. If issues persist, a battery change might resolve it.
  • Time is inaccurate: Re-set the time following the instructions in Section 4.2. If the inaccuracy persists, the movement may require servicing.
  • Water ingress: Despite 5ATM water resistance, extreme conditions or damage to seals can lead to water ingress. Stop using the watch immediately and seek professional repair to prevent further damage.

8. Specifications

Product parameter diagram for SMAEL 8112 watch, showing case diameter, case thickness, and band width.

Figure 6: Product Dimensions

FeatureSpecification
Brand NameSMAEL
Model Number8112
Movement TypeQuartz, Digital
Case MaterialPlastic
Case ShapeRound
Case Diameter48mm (1.88 inch)
Case Thickness17mm (0.66 inch)
Dial Window Material TypePlexiglass
Band Material TypeSilica Gel
Band Width21mm (0.82 inch)
Band Length130mm/80mm (total 23cm)
Wearing Range140mm-230mm
Clasp TypeBuckle
Water Resistance Depth5ATM (50 meters)
Net Weight61g
Battery IncludedYes
FeaturesStop Watch, Shock Resistant, LED Display, Repeater, Luminous, Auto Date, Chronograph, Complete Calendar, Water-Resistance, Alarm, Week Display, Dual Time Display, Countdown, Chime at the correct time, Shatterproof, Ultra Long Life

9. User Tips

  • Understand Water Resistance: While 5ATM is good for daily splashes, avoid pressing buttons underwater or exposing the watch to hot water/steam, which can degrade seals.
  • Button Feel: The multi-function buttons are designed for durability. A firm press may be required to register input.
  • Night Light Usage: Use the LED night light sparingly to conserve battery life, although it is designed for ultra-long life.
  • Strap Comfort: The silica gel strap is designed for comfort and durability. Clean it regularly to prevent skin irritation and maintain its appearance.

10. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact the seller directly. If you encounter any issues that cannot be resolved using the troubleshooting guide, please reach out to the customer support of your retailer for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.