K10 Motorcycle Helmet Headset User Manual

1. Introduction

Thank you for choosing the K10 Motorcycle Helmet Headset. This device integrates a 1080P video dashcam, Bluetooth 5.3 connectivity, FM radio, and intelligent noise cancellation into a waterproof design, providing a comprehensive solution for communication, entertainment, and recording during your rides. Please read this manual carefully before use to ensure proper operation and to maximize your experience.

2. Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Warning: Keep the device and its cord out of reach of children under 3 years old.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.

3. Package Contents

Please check the package to ensure all items are present:

• 1 x K10 Host Unit
• 1 x TF Card (32GB, random color)
• 1 x Clamp Base
• 1 x Horn Microphone (Soft Mic, Hard Mic, or 2-in-1 Mic depending on selection)
• 1 x Velcro Set
• 1 x Type-C Charging Cable
• 1 x User Manual (PDF available for download: User Manual PDF)

4. Specifications

5. Setup and Installation

Before installation, ensure the product and all accessories are complete and undamaged.

5.1. Charging the Device

Before first use, fully charge the K10 headset using the provided Type-C charging cable. Connect the cable to the headset's charging port and a suitable USB power source. The charging time is approximately 2 hours.

5.2. Attaching to Helmet

The K10 headset is designed for super adaptability and can be used with various helmet types including Full helmet, Off-road helmets, Unmasked helmets, and Half helmets.

1. Choose a suitable location on the side of your helmet for mounting the clamp base.
2. Securely attach the clamp base to the helmet using the provided mechanism (e.g., screws or adhesive, refer to clamp base instructions).
3. Slide the K10 host unit onto the clamp base until it clicks into place.
4. Install the horn microphone inside the helmet, positioning it close to your mouth for optimal voice capture. Use the Velcro provided to secure the microphone and earphone speakers inside the helmet.

5.3. Initial Check

After installation, perform a quick check to ensure the product functions properly. Power on the device and verify the LCD display is active.

6. Operating Instructions

6.1. Power On/Off

• Power On: Press and hold the power button (usually the 'M' button or a dedicated power button) until the LCD screen lights up.
• Power Off: Press and hold the power button until the LCD screen turns off.

6.2. Bluetooth Pairing

The K10 uses a Bluetooth 5.3 chip for stable connections.

1. Ensure the headset is powered on.
2. Activate Bluetooth on your mobile phone or other device.
3. Search for available Bluetooth devices and select "K10" (or similar name) from the list.
4. Once paired, the headset will confirm the connection, and you can stream audio or make calls.

6.3. Button Functions

The headset features intuitive button controls for various functions:

• '+' Button: Short press for Next Song, Long press for Volume Up.
• '-' Button: Short press for Previous Song, Long press for Volume Down.
• 'M' Button (Multi-function): Typically used for Power On/Off, Play/Pause music, Answer/End calls. Specific functions may vary with short/long presses or double-taps.
• Camera Button: Short press to take a photo, Long press to start/stop video recording.
• One-click Answer: Press the 'M' button to answer incoming calls.
• Voice Assistant: Long press a designated button (often 'M' or a specific voice button) to activate your phone's voice assistant (e.g., Siri, Google Assistant).

6.4. DVR Recording/Photography

The integrated 1080P camera allows you to record your rides.

1. Ensure a TF card is inserted into the designated slot.
2. Press the camera button to start recording video or take a photo.
3. Video resolution is 1920*1080P in MJPG/AVI format.

6.5. FM Radio

The headset includes an FM radio with a frequency range of 87.5-108.0MHZ.

1. Activate FM radio mode (refer to specific button combination in the full PDF manual).
2. Use the '+' and '-' buttons to scan for stations or adjust frequency.

6.6. WIFI Hotspot

The device supports WIFI hotspot functionality for connecting to your phone for video transfer or settings adjustments. Refer to the full PDF manual for detailed instructions on activating and connecting to the WIFI hotspot.

6.7. Atmosphere Light

The headset features an atmosphere light that can be turned on or off. Consult the full PDF manual for the specific button sequence to control this feature.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the headset. Do not use harsh chemicals or abrasive cleaners.
• Water Resistance: The device has an IPX8 waterproof rating, meaning it can withstand immersion in water under certain conditions. However, avoid prolonged exposure to water or high-pressure water jets. Ensure all ports are securely closed before exposure to moisture.

• Storage: Store the headset in a cool, dry place when not in use. Avoid extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

8. Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect to a charger and try again.
• Cannot pair via Bluetooth: Make sure the headset is in pairing mode and within range of your device. Turn off and on Bluetooth on both devices.
• No sound: Check volume levels on both the headset and your connected device. Ensure the earphones are properly connected.
• DVR not recording: Verify that a TF card is inserted and has sufficient free space. Check if the card is formatted correctly.
• Poor call quality: Ensure the microphone is positioned correctly near your mouth. The intelligent noise cancellation feature should help, but strong wind noise can still affect quality.

For more detailed troubleshooting, please refer to the comprehensive user manual PDF.

9. User Tips

• Microphone Choice: The K10 comes with different microphone options (Soft Mic, Hard Mic, 2-in-1 Mic). Choose the one that best suits your helmet type and riding conditions for optimal voice clarity.
• WIFI Hotspot: Utilize the WIFI hotspot feature for quick and easy transfer of recorded video files to your smartphone without needing to remove the TF card.
• Video Resolution: The camera records in 1080P, providing clear footage of your rides. Ensure your TF card is capable of handling high-resolution video recording.

10. Frequently Asked Questions (FAQ)

Q: How do I activate the Wi-Fi?

A: Please refer to the detailed instructions in the full user manual PDF for activating the Wi-Fi hotspot feature and connecting your device.

Q: Is the video recording 1080p or 720p?

A: The K10 Helmet Headset records video in Full HD 1080P (1920*1080P) resolution.

11. Warranty and Support

This product conforms with all applicable European Union regulations, indicated by the CE symbol. The manufacturer, Shenzhen Zhiyu Technology Co., Ltd., declares that the product meets essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives.

For warranty claims, technical support, or further inquiries, please contact the manufacturer or your point of purchase. Refer to the contact information provided in the official user manual PDF:

• Manufacturer: Shenzhen Zhiyu Technology Co., Ltd.
• EU Authorized Representative: SUCCESS COURIER SL
• Official User Manual (PDF): Download PDF