Ronix 8613 12V Cordless Brushless Drill Screwdriver Instruction Manual

1. Introduction

Thank you for choosing the Ronix 8613 12V Cordless Brushless Drill Screwdriver. This powerful and versatile tool is designed for efficient drilling and screwing tasks in various materials. Featuring a brushless motor, keyless chuck, and multiple clutch settings, it offers precision and durability for both DIY enthusiasts and industrial applications. Please read this manual carefully before operating the tool to ensure safe and effective use.

2. General Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

• Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
• Personal Safety: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• Battery Pack Use and Care: Recharge only with the charger specified by the manufacturer. Do not use battery packs or tools that are damaged or modified.

3. Package Contents

Your Ronix 8613 Cordless Brushless Drill Screwdriver kit includes the following items:

• 1 x Ronix 8613 Cordless Brushless Drill Screwdriver
• 2 x 1.5Ah 12V Batteries
• 1 x 2-in-1 Charger (110-240V)
• 1 x BMC Carrying Case
• 1 x Color Box Packaging

4. Specifications

5. Setup

5.1. Charging the Battery

1. Connect the charger to a standard 110-240V AC power outlet.
2. Insert the battery pack into the charger. Ensure it clicks into place.
3. The charging indicator on the charger will show the charging status. A full charge typically takes 1 hour.
4. Once fully charged, remove the battery from the charger. Do not overcharge the battery.

5.2. Installing and Removing the Battery Pack

• To Install: Align the battery pack with the slot in the tool handle and slide it in until it locks securely.
• To Remove: Press the battery release button (usually located on the side or front of the battery pack) and slide the battery out.

5.3. Installing and Removing Drill/Screwdriver Bits

The Ronix 8613 features a 10mm 2-sleeve keyless chuck for quick and easy bit changes.

1. To Install: Rotate the front sleeve of the chuck counter-clockwise until the jaws are open wide enough to insert the bit. Insert the desired drill or screwdriver bit. Rotate the front sleeve clockwise to tighten the chuck jaws firmly around the bit. Ensure the bit is centered and secure.
2. To Remove: Rotate the front sleeve of the chuck counter-clockwise to loosen the jaws and remove the bit.

6. Operation

6.1. Power On/Off and Speed Control

• The tool is activated by pressing the trigger switch.
• The speed is variable and controlled by the amount of pressure applied to the trigger. Light pressure results in lower speed, while full pressure results in maximum speed.
• The tool has two speed settings: 0-400 RPM (low speed for high torque applications) and 0-1500 RPM (high speed for fast drilling). Use the speed selector switch on top of the tool to choose between these ranges.

6.2. Forward/Reverse Rotation

A forward/reverse selector switch is located above the trigger. Push the switch to the left for forward rotation (screwing in, drilling) and to the right for reverse rotation (removing screws). Position the switch in the center to lock the trigger and prevent accidental starting.

6.3. Torque Adjustment (Clutch Settings)

The Ronix 8613 features 18 clutch settings and a drill mode. Rotate the torque adjustment ring (located behind the chuck) to select the desired setting.

• Screwing: Use lower torque settings (1-17) for smaller screws and softer materials to prevent over-tightening or stripping. Increase the setting for larger screws or harder materials. The maximum torque is 26 N.m.
• Drilling: For drilling, always select the drill mode symbol (drill bit icon) on the torque adjustment ring. This bypasses the clutch and provides maximum power.

6.4. Drilling and Screwing

• Drilling: Select the drill mode. Start drilling at a low speed to create a pilot hole, then increase speed as needed. Apply steady, even pressure.
• Screwing: Select an appropriate clutch setting. Start at a low speed and gradually increase. The clutch will disengage when the set torque is reached, preventing damage to the screw head or workpiece.

7. Maintenance

• Cleaning: Keep the tool's ventilation openings clean to prevent overheating. Use a soft, damp cloth to clean the exterior. Do not use harsh chemicals or abrasive cleaners.
• Chuck Maintenance: Periodically clean the chuck jaws to ensure proper gripping.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
• Inspection: Regularly inspect the tool for any signs of damage, loose screws, or worn parts. Have any issues repaired by qualified personnel.

8. Troubleshooting

9. User Tips

• For delicate tasks or when working with soft materials, always start with a lower torque setting and gradually increase if needed. This prevents damage to the workpiece or stripping screw heads.
• Utilize the two-speed gearbox effectively: use the lower speed (0-400 RPM) for driving screws and applications requiring higher torque, and the higher speed (0-1500 RPM) for faster drilling.
• Keep your bits sharp and clean. Dull bits require more force and can lead to inefficient work and potential damage to the tool or material.

10. Warranty and Support

Ronix products are manufactured to high-quality standards. This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Ronix customer service.

For technical support, spare parts, or service inquiries, please contact your retailer or the official Ronix support channels. Ensure you have your product model number (8613) and purchase details available when contacting support.

11. Frequently Asked Questions (FAQ)

Q: Why would I choose this product?

A: This product offers premium quality, a brushless motor for efficiency and durability, a versatile 10mm keyless chuck, and comes with two batteries and a charger for continuous work.

Q: What about after-sales service?

A: Our company is responsible for the supplied product within its usage life. Please refer to the warranty section for more details.

Q: Can I get samples?

A: Samples can be supplied, but a sample fee will be charged, which may be returned after an order is confirmed.

Q: Can you help me design or modify the products as I request?

A: We have an R&D capability and a professional & efficient team, so custom service and OEM/ODM are welcome.