1. Introduction
Thank you for choosing the VIKEFON Car Phone Holder Mount. This gravity-sensing phone holder is designed to provide a secure and convenient way to mount your smartphone in your vehicle. Featuring an auto-lock mechanism and 360-degree rotation, it ensures your device is stable and accessible for navigation and hands-free use. This manual provides essential information for proper installation, operation, and maintenance of your new car phone holder.
2. Setup and Installation
The VIKEFON Car Phone Holder is designed for easy installation on your vehicle's air vent. Follow these steps for a secure setup:
- Choose an Air Vent: Select a suitable air vent in your car that provides good visibility and does not obstruct your driving view or vehicle controls.
- Attach the Clip: The holder features a robust air vent clip. Gently push the clip onto one of the air vent blades until it is firmly seated. Ensure the clip is securely attached and the holder does not wobble.
- Adjust Orientation: The holder features a ball-joint mechanism allowing 360-degree rotation. Adjust the holder to your preferred viewing angle.
3. Operating Instructions
The VIKEFON Car Phone Holder features a convenient one-hand operation with an auto-lock gravity mechanism.
3.1 Inserting Your Phone
- Open the Clamp: Press the open key located on the holder. The clamping arms will automatically pop open.
- Place Your Phone: Gently place your smartphone into the holder.
- Auto-Lock: As the weight of your phone presses down on the bottom bracket, the side clamping arms will automatically close and secure your phone.
3.2 Removing Your Phone
To remove your phone, simply lift it upwards. The gravity mechanism will release the clamping arms, allowing you to retrieve your device with one hand.
3.3 Adjusting Viewing Angle
The holder supports both horizontal and vertical screen orientations and offers a 360-degree viewing angle. Adjust the bracket freely to optimize your navigation and driving experience.
4. Maintenance
To ensure the longevity and optimal performance of your VIKEFON Car Phone Holder, follow these maintenance guidelines:
- Cleaning the Suction Cup (if applicable): If the suction cup (for dashboard/windshield mounting, though this model is primarily air vent) becomes dirty or loses its stickiness, wash it with warm water and let it air dry completely before re-attaching.
- General Cleaning: Wipe the holder with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, as these can damage the materials.
- Check for Wear: Periodically inspect the clamping arms, air vent clip, and ball joint for any signs of wear or damage.
5. Troubleshooting
If you encounter any issues with your car phone holder, consider the following:
- Holder is not stable on air vent: Ensure the air vent clip is fully engaged with a vent blade. Try repositioning the clip to a different part of the vent or a different vent if necessary.
- Phone is not securely held: Verify that your phone's size is within the supported range (4-7 inches). Ensure the phone is placed correctly to activate the gravity auto-lock mechanism.
- Difficulty adjusting angle: Check if the ball joint's tightening ring is loose enough to allow movement. Tighten it after adjusting to secure the position.
6. Specifications
Key specifications for the VIKEFON Car Phone Holder Mount:
| Parameter | Detail |
|---|---|
| Product Name | 2022 Innovative Gravity Stand |
| Product Material | ABS + Silicone |
| Product Size | 106mm * 106mm * 110mm |
| Color Options | Black, Red |
| Applicable Models | 4 ~ 6.7 inch mobile phones |
| Applicable Location | Air Outlet |
7. User Tips
- Always ensure the holder is securely attached to the air vent before placing your phone.
- For optimal stability, ensure your phone is centered within the holder to properly engage the gravity-sensing auto-lock.
- Periodically check the tightness of the air vent clip, especially after driving on rough roads.
8. Warranty and Support
For any questions, concerns, or support regarding your VIKEFON Car Phone Holder Mount, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.
