Introduction
The kebidumei K10 is a multi-functional motorcycle helmet headset designed to enhance your riding experience with advanced communication, entertainment, and recording capabilities. It features Bluetooth 5.4 for stable connections, an LCD display for clear information, stereo FM radio, and a 1080P HD video dashcam. With IPX8 waterproofing and intelligent noise cancellation, the K10 ensures clear communication and reliable performance in various conditions.
Setup
Package Contents
Please check that all the following items are included in your package:
- 1 x K10 Host Unit
- 1 x TF Card (32G)
- 1 x Clamp Base
- 1 x Horn Microphone (Hard Mic, Soft Mic, or 2-in-1 Mic depending on selection)
- 1 x Velcro Set
- 1 x Type-C Charging Cable
- 1 x User Manual
Installation
The K10 headset is designed for super adaptability and can be installed on various helmet types, including full-face, off-road, unmasked, and half helmets. Use the provided clamp base and Velcro to securely attach the host unit to your helmet. Ensure the microphone is positioned correctly for optimal voice pickup.
Charging
Before first use, fully charge the K10 headset. Connect the provided Type-C charging cable to the charging interface on the device and a suitable USB power source. The charging current is approximately 1000mA, and a full charge takes about 2 hours. The saturation voltage is 4.2V±0.05.
Operating Instructions
Power On/Off
Press and hold the power button (refer to the device diagram for exact location) for a few seconds to power on or power off the device. The LCD screen will illuminate upon power-on.
Bluetooth Pairing
With the device powered on, activate Bluetooth on your smartphone or other compatible device. Search for 'K10' in the list of available Bluetooth devices and select it to pair. The K10 supports HFP, HSP, A2DP, and AVRCP profiles, ensuring compatibility with most devices. The connection distance is typically 10 meters or more.
Music Playback
Once paired via Bluetooth, you can stream music from your smartphone. Use the physical buttons on the K10 to control playback:
- Switch to previous song: Press the '-' button.
- Switch to next song: Press the '+' button.
- Pause/Play music: Press the 'M' button.
Phone Calls
The K10 supports high-quality calls with intelligent noise cancellation. When a call comes in, you can answer it with a one-click action (refer to the device diagram for the specific button). The electret condenser microphone ensures clear voice transmission.
FM Radio
The K10 includes a stereo FM radio. To activate the FM radio, press the designated FM button (refer to the device diagram). The LCD display will show the current frequency, which ranges from 87.5-108.0MHz. Use the '+' and '-' buttons to tune to different stations.
Voice Assistant
Access your smartphone's voice assistant directly from the K10. This feature allows for hands-free commands such as navigating to a gas station or home, as depicted in the control diagram.
DVR Recording / Photography
The integrated 1080P HD video dashcam allows you to record your rides. The video resolution is 1920*1080P, and the video encoding format is MJPG/AVI. Ensure a TF card is inserted for recording. The device also supports photography.
WIFI Hotspot
The K10 supports a WIFI hotspot function. This feature allows for connectivity with other devices, potentially for video transfer or remote control (specific functionality may vary, refer to the full user manual for details).
Atmosphere Light
The device includes an atmosphere light feature that can be turned on or off as desired.
Maintenance
Waterproofing
The K10 headset boasts an IPX8 waterproof rating, meaning it is protected against continuous immersion in water. This allows for use in various weather conditions without fear of wind or rain damage. However, avoid prolonged submersion or high-pressure water jets.
Cleaning and Storage
- Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the Type-C charging port cover is securely closed when not charging to maintain waterproofing.
- Store the headset in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect to the Type-C charging cable and allow it to charge for at least 15 minutes before attempting to power on again.
- Bluetooth pairing issues: Make sure the K10 is in pairing mode (usually indicated by a flashing Bluetooth icon on the LCD). Turn off and on Bluetooth on your phone, and try pairing again. Ensure no other devices are actively connected to the K10.
- No audio/poor audio quality: Check the volume levels on both the K10 and your connected device. Ensure the speakers are correctly positioned inside your helmet. If using for calls, confirm the microphone is not obstructed.
- DVR recording not working: Verify that a TF card is properly inserted and has sufficient free space. Check the video recording settings.
- WiFi connection difficulties: Some users have reported challenges with WiFi connectivity. Ensure you are following the specific instructions in the full user manual for establishing a WiFi hotspot connection. If issues persist, try resetting the device.
- No intercom function: Please note that the K10 headset does not support intercom functionality with other devices or brands. This feature is not included in this model.
Specifications
| Feature | Specification |
|---|---|
| Material | ABS+Silicone |
| Sound Channel System | Stereo |
| Manipulation Mode | Key |
| Waterproof Level | IPX8 |
| Chipset | JIELI JL7016C |
| Bluetooth Version | V5.3 |
| Compatible Systems | HFP, HSP, A2DP, AVRCP |
| Operating Frequency | 2.4GHZ-2.4835GHZ ISM Band |
| Bluetooth Distance | ≥ 10 meters |
| Horn Power | 2mW-32mW |
| Earphone Power Amplifier | TK0430D |
| Frequency Response | 20~20000Hz |
| FM Radio Frequency Range | 87.5-108.0MHZ |
| Horn | 40mm 32 Ohm |
| Microphone | Electret condenser microphone |
| Battery Capacity | 1200mAh (Built-in) |
| Charging Interface | Type-C |
| Charging Current | About 1000MA |
| Charging Time | About 2 hours |
| Saturation Voltage | 4.2V±0.05 |
| Static Power Consumption | 8UA |
| Standby Power Consumption | 20MA |
| Running Time | About 40 hours |
| Shutdown Standby Time | 6 months |
| Over Discharge Protection | 3.3V±0.05 |
| Video Resolution | 1920*1080P |
| Video Encoding Format | MJPG/AVI format |
| Item Weight | 230g |
| External Testing Certification | CE |
| Certification | CE, RoHS, FCC |
| Origin | Mainland China |
User Tips
- Microphone Choice: The K10 comes with different microphone options (Hard Mic, Soft Mic, 2-in-1 Mic). Choose the one that best suits your helmet type and riding style for optimal voice clarity.
- Battery Life: With approximately 40 hours of running time and 6 months of shutdown standby time, the K10 offers excellent battery endurance. Remember to fully charge it before long trips.
- DVR Storage: Always ensure you have a TF card inserted and sufficient storage space for your video recordings. Regularly back up important footage.
- No Intercom: Be aware that this model does not support direct intercom communication with other riders or devices. Its primary functions are personal audio, calls, recording, and navigation.
- WiFi Hotspot: While the device supports a WiFi hotspot, specific setup and usage details for this feature may require consulting the comprehensive user manual for your model.
Warranty and Support
For any warranty claims, technical support, or further inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
