K&F CONCEPT O275A5+BH-36

Contents

K&F CONCEPT 192cm Camera Tripod Instruction Manual

Model: O275A5+BH-36 | Brand: K&F CONCEPT

Introduction

Thank you for choosing the K&F CONCEPT O275A5+BH-36 Camera Tripod. This professional aluminum tripod is designed for stability and flexibility, featuring a 360-degree ball head and a detachable monopod. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new tripod to ensure optimal performance and longevity.

Package Contents

Please verify that all items are included in your package:

  • Tripod x 1
  • Phone and tablet clip x 1
  • 1/4" Quick release plate x 2
  • Bluetooth remote control x 1
  • Storage bag x 1
  • Instruction manual x 1 (This document)
Contents of the K&F CONCEPT O275A5+BH-36 Tripod package, including tripod, phone clip, quick release plates, Bluetooth remote, storage bag, and manual.
Figure 1: Included accessories and main tripod unit.

Specifications

K&F CONCEPT O275A5+BH-36 Tripod Specifications
FeatureSpecification
Model NumberO275A5+BH-36
Brand NameK&F CONCEPT
TypeProfessional Tripod
MaterialAluminum Alloy
Number of Leg Sections5
Maximum Tube Diameter2.7cm / 1.06"
Maximum Height (Tripod)192cm / 75.6"
Maximum Height (Monopod)203cm / 79.9"
Folded Length43cm / 16.93"
Weight Capacity8kg / 17.6lb
Net Weight1.5kg / 3.3lb
Ball Head Diameter36mm
Ball Head Load Weight8kg
Ball Head Net Weight220g
Ball Head Height8cm
Ball Head Bottom Screw3/8"
Ball Head Top Screw1/4"
CompatibilityDSLR, Mirrorless System Cameras, Mobile Phones, Tablets
Diagram showing the K&F CONCEPT O275A5+BH-36 Tripod with a camera mounted, alongside a table of key specifications including leg sections, tube diameter, max height, storage length, weight capacity, net weight, and material.
Figure 2: Tripod specifications overview.
Table detailing the specifications of the BH-36 Ball Head, including load weight, net weight, height, sphere diameter, bottom screw, and top screw.
Figure 3: BH-36 Ball Head specifications.

Key Components

Familiarize yourself with the main parts of your K&F CONCEPT tripod:

  • Arca-Swiss Quick Release Plate: For fast and secure camera attachment. Two pieces are included.
  • 2-Section Centre Column: Allows for additional height adjustment.
  • 3 Angle Adjustable Legs: Provides flexibility for various shooting conditions and terrains.
  • Stabilising Hooks: Located at the bottom of the center column, these hooks allow you to hang weight (e.g., a backpack) for increased stability.
  • Plate Buckle Tripod Locks: Quick-release leg locks for easy and fast height adjustment.
  • Bluetooth Remote: For wireless shutter control with compatible mobile devices.
Diagram highlighting key components of the K&F CONCEPT Ball Head Tripod: Arca-Swiss Quick Release Plate, 2-Section Centre Column, 3 Angle Adjustable legs, Stabilising Hooks, Plate Buckle Tripod Locks, and Bluetooth Remote.
Figure 4: Ball Head Tripod key components.

Setup Instructions

  1. Unfold the Tripod: Release the leg locks and extend the tripod legs to your desired spread. Ensure the legs are securely locked using the plate buckle locks.
  2. Adjust Leg Angles: Press the leg angle adjustment buttons at the top of each leg to set the desired angle for stability on uneven surfaces or for low-angle shots.
  3. Extend Center Column (Optional): Loosen the lock on the 2-section center column and extend it to increase the tripod's height. Securely tighten the lock.
  4. Attach Camera/Device:
    • For Cameras: Attach one of the Arca-Swiss quick release plates to your camera's 1/4" tripod socket. Then, slide the plate with the camera into the ball head clamp and tighten the clamp securely.
    • For Mobile Phones/Tablets: Mount the phone/tablet clip onto a quick release plate, then attach it to the ball head as described above. Insert your device into the clip.
  5. Leveling: Use the built-in bubble level on the ball head to ensure your camera is perfectly level.
  6. Bluetooth Remote Pairing: Turn on the Bluetooth remote. On your mobile device, search for and pair with the remote. Once paired, you can use it to trigger your device's shutter wirelessly.
Diagram illustrating how to adjust the two-section center column and the leg angles of the tripod.
Figure 5: Adjusting tripod height and leg angles.
Diagram showing the phone/tablet holder and the 1/4 inch screw for camera attachment, demonstrating wide compatibility.
Figure 6: Wide application with phone holder and 1/4" screw.

Operating Your Tripod

Adjusting Height and Stability

  • The tripod can be adjusted from a minimum height of 55cm to a maximum of 192cm.
  • For added stability, especially in windy conditions or with heavy equipment, hang a weight (like your camera bag) from the stabilising hooks located at the bottom of the center column.
Diagram illustrating the various height adjustments of the tripod, from folded (43cm) to fully extended (192cm) and monopod mode (203cm).
Figure 7: Multiple heights available for the tripod and monopod.

Using the Ball Head

The 36mm ball head provides smooth and precise camera positioning:

  • Loosen the main locking knob to adjust the camera angle freely.
  • Tighten the main locking knob to secure the camera in position.
  • Use the separate panning lock knob to control horizontal rotation for panoramic shots. The 360-degree scale at the base of the ball head assists with precise panoramic alignment.

Detachable Monopod Function

To convert your tripod into a monopod:

  1. Unscrew the leg with the foam grip from the tripod body.
  2. Unscrew the ball head from the center column.
  3. Screw the ball head onto the top of the detached leg.
  4. Extend the monopod to its maximum height of 203cm for flexible, stable shooting on the go.
Diagram showing the steps to convert the tripod into a detachable monopod, including unscrewing a leg, detaching the ball head, and reattaching the ball head to the leg.
Figure 8: Detachable Monopod Design.

Shooting Angles

The tripod supports various shooting angles:

  • High Angle Shot: Achieved by fully extending the legs and center column.
  • Low Angle Shot: Achieved by spreading the legs wide and using the lowest leg angle setting.
  • Inverted Centre Column: For extreme low-angle or macro photography, the center column can be inverted.
Three examples of shooting angles: a high angle shot with the tripod fully extended, a low angle shot with the tripod legs spread wide, and an inverted center column setup.
Figure 9: Various shooting angles.

Product Demonstration Video

Video 1: K&F CONCEPT O275A5+BH-36 Camera Tripod demonstration, showing setup, features, and usage.

Maintenance

  • Cleaning: Wipe down the tripod with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp cloth and mild soap, then dry thoroughly.
  • Lubrication: The ball head features an oil-free damping design. Do not apply lubricants to the ball head mechanism.
  • Leg Locks: Periodically check the plate buckle leg locks for proper function. Ensure they engage and disengage smoothly. Clean any debris that might hinder their operation.
  • Storage: Store the tripod in its provided storage bag in a cool, dry place away from extreme temperatures and humidity.
  • Screws and Joints: Occasionally check all screws and joints for tightness. Do not overtighten.

Troubleshooting

  • Tripod is unstable:
    • Ensure all leg sections are fully extended and their plate buckle locks are securely fastened.
    • Verify that the leg angles are set appropriately for the terrain.
    • Consider hanging a weight from the stabilising hooks for added stability.
  • Camera movement on ball head:
    • Ensure the main locking knob on the ball head is fully tightened.
    • Check that the quick release plate is securely attached to both the camera and the ball head clamp.
  • Bluetooth remote not connecting:
    • Ensure the remote is powered on and within range (up to 10 meters).
    • Check your mobile device's Bluetooth settings to ensure it's enabled and correctly paired with the remote.
    • Replace the remote's battery if necessary.
  • Legs are stiff or difficult to extend/retract:
    • Clean the leg sections and locks to remove any accumulated dirt or sand.
    • Avoid forcing the leg sections; ensure locks are fully disengaged before adjusting.

User Tips

  • When shooting outdoors, always check the stability of the tripod on uneven ground before mounting your camera.
  • Utilize the detachable monopod feature for quick, portable shooting when a full tripod setup isn't necessary.
  • Experiment with different leg angles and the inverted center column for creative low-angle and macro shots.
  • The Bluetooth remote is ideal for group photos or self-portraits, eliminating camera shake from pressing the shutter button.
  • Always carry your tripod in its protective bag to prevent scratches and damage during transport.
Collage of usage scenarios: Vlogging with a phone on the tripod, a family group photo, an interview setup, and a person traveling with the monopod.
Figure 10: Diverse usage scenarios for the tripod.

Warranty and Support

K&F CONCEPT products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official K&F CONCEPT website or contact their customer service directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.