K&F CONCEPT T255A3+BH-28L

Contents

K&F CONCEPT T255A3+BH-28L Travel Aluminium Camera Tripod User Manual

Model: T255A3+BH-28L | Brand: K&F CONCEPT

1. Introduction

Thank you for choosing the K&F CONCEPT T255A3+BH-28L Travel Aluminium Camera Tripod. This versatile tripod is designed for photographers seeking stability, flexibility, and portability. It features a unique transverse center column, a detachable monopod function, and a 360° rotatable ball head, making it suitable for various photography styles, including panorama, low-angle, inverted, and overhead shooting. Please read this manual carefully to ensure proper setup, operation, and maintenance of your tripod.

2. Package Contents

Before proceeding, please verify that all items are present in your package:

  • 1 x T255A3 Tripod with BH-28L Ball Head
  • 1 x Tripod Carry Bag
  • 1 x Instruction Manual
  • 1 x Hex Wrench
K&F CONCEPT T255A3+BH-28L Tripod Package Contents
Image: Contents of the K&F CONCEPT T255A3+BH-28L Tripod package.

3. Setup Guide

3.1. Initial Setup

  1. Remove the tripod from its carry bag and unfold the legs.
  2. Ensure the ball head is securely attached to the tripod's main column.

3.2. Adjusting Leg Sections

The tripod features 5-section column legs with quick-release flip-locks for rapid height adjustment.

  1. To extend a leg section, open the flip-lock, pull the leg to the desired length, and close the flip-lock securely.
  2. Repeat for all leg sections on each leg until the desired height is achieved.
Tripod leg extension with quick release flip-locks
Image: Illustrates the quick-release flip-locks for extending tripod legs.

3.3. Adjusting Leg Angles

The tripod legs can be adjusted to three different opening angles to provide stability on various terrains and inclines.

  1. Push the angle adjustment tab at the top of each leg.
  2. Move the leg to one of the three predefined angle positions until it clicks into place.
Tripod leg angle adjustment for stability on uneven ground
Image: Demonstrates adjusting the tripod leg angles for different stability requirements.

3.4. Transverse Center Column Setup

The central column can be moved from 0 to 180 degrees and rotated 360° horizontally for panoramic and overhead shots.

  1. Loosen the main column locking knob.
  2. Pull the center column upwards until it clears the tripod body.
  3. Tilt the column to the desired horizontal angle (up to 180 degrees).
  4. Tighten the locking knob to secure the column in place.
  5. For 360° horizontal rotation, ensure the column is in the horizontal position and rotate it as needed.
Tripod with horizontal center column extended
Image: The tripod with its center column extended horizontally, measuring 35cm/13.8 inches.
Horizontal center column 360 degree rotation
Image: Demonstrates the 360-degree rotation capability of the horizontal center column.

3.5. Detachable Monopod Conversion

One of the tripod legs can be detached and combined with the center column to form a monopod.

  1. Unscrew the leg with the foam grip from the tripod body.
  2. Unscrew the center column from the tripod body.
  3. Screw the detached leg onto the bottom of the center column.
  4. Attach your camera to the ball head on the monopod.
Tripod converting into a monopod
Image: Shows the process of detaching a leg and the center column to form a monopod.

4. Operating Instructions

4.1. Using the Ball Head (BH-28L)

The BH-28L ball head allows for precise camera positioning and 360° panoramic shooting.

  1. Attach your camera to the quick release plate on the ball head.
  2. Loosen the main locking knob to adjust the camera angle.
  3. Tighten the main locking knob to secure the camera position.
  4. For panoramic shots, loosen the panoramic base knob and rotate the camera horizontally. The base has degree markings for accurate alignment.
360 degree panoramic shooting with ball head
Image: Illustrates the 360-degree panoramic shooting capability using the ball head.

4.2. Low-Angle Shooting

For extreme low-angle shots, spread the tripod legs to their widest angle and use the shortest leg sections. The transverse center column can also be inverted for even lower perspectives.

Example of low-angle creative shooting with tripod
Image: A camera mounted on the tripod for low-angle creative shooting.

4.3. Inverted Shooting

To achieve inverted shooting (camera hanging below the center column), fully extend and invert the center column. This is ideal for macro photography or unique perspectives.

Tripod set up for inverted shooting
Image: The tripod configured for inverted shooting, with the camera positioned below the center column.

4.4. Overhead Shooting

Utilize the transverse center column in its horizontal position for overhead shots, perfect for product photography or video recording from above.

Tripod setup for overhead shooting
Image: A camera mounted on the horizontal center column for overhead shooting, capturing a gaming controller.

4.5. Multi-functional Accessory Extension

The tripod's design allows for the attachment of various accessories, such as external monitors, microphones, or lights, to enhance your shooting setup.

Tripod with multi-functional accessory extension
Image: The tripod configured with multiple accessories like a phone, light, and microphone for extended functionality.

5. Maintenance

  • Cleaning: Wipe down the tripod with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
  • Lubrication: Periodically check the moving parts. If any joints feel stiff, apply a small amount of silicone-based lubricant.
  • Storage: Store the tripod in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Regularly inspect all screws, knobs, and leg locks for tightness. Use the provided hex wrench to tighten any loose components.

6. Troubleshooting

  • Tripod is unstable: Ensure all leg sections are fully extended and their flip-locks are securely closed. Verify that the leg angles are locked into position. Check the ground for unevenness.
  • Ball head movement is stiff: Loosen the main locking knob completely. If still stiff, clean any debris from the ball head mechanism and apply a small amount of lubricant if necessary.
  • Camera wobbles on ball head: Ensure the quick release plate is securely attached to your camera and then firmly locked into the ball head clamp. Check that the ball head's main locking knob is fully tightened.
  • Leg sections won't extend/retract smoothly: Check for dirt or sand inside the leg sections. Clean them thoroughly. Ensure flip-locks are fully open before attempting to adjust.

7. Specifications

K&F CONCEPT T255A3+BH-28L Tripod with key specifications
Image: The K&F CONCEPT T255A3+BH-28L Tripod displaying its main specifications.
Tripod Specifications (Model: T255A3)
Feature Detail
Material Aluminium Alloy
Leg Sections 5
Tube Diameter 2.5 cm / 0.98"
Max Extended Length 186 cm / 73.23" (72")
Folded Length 43 cm / 16.93"
Load Capacity 10 kg / 22 lbs
Tripod Weight 1.87 kg / 4.12 lbs
Ball Head BH-28L specifications
Image: Detailed specifications for the BH-28L Ball Head.
Ball Head Specifications (Model: BH-28L)
Feature Detail
Load Capacity 10 kg / 22 lbs
Ball Diameter 2.8 cm / 1.1"
Bottom Interface 3/8"
Height 8 cm / 3.15"
Weight 0.27 kg / 0.6 lbs
Material Aluminum Alloy

8. User Tips

  • Always ensure your camera is securely mounted and all locking knobs are tightened before leaving the tripod unattended.
  • When shooting in windy conditions, consider hanging a weight (e.g., your camera bag) from the center column hook for added stability.
  • Practice adjusting the transverse center column and monopod conversion to become proficient in various shooting scenarios.
  • For maximum stability, extend the thickest leg sections first and avoid over-extending the thinnest sections unless necessary.
  • When packing, collapse the tripod fully and place it in its protective carry bag to prevent damage.

9. Warranty and Support

K&F CONCEPT products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official K&F CONCEPT website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.