YOWLING Handlebar Grips Caps handlebar Ends 22mm

Contents

Motorcycle Handlebar End Caps Installation and Maintenance Guide

Model: Handlebar Grips Caps (22mm)

1. Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your new YOWLING Motorcycle Handlebar End Caps. These end caps are designed to protect your motorcycle's handlebars and reduce damage during impacts, while also enhancing its aesthetic appeal. Please read this guide thoroughly before installation and use.

2. Product Features

  • Protection: Helps protect the handlebar rod and reduce damage during falls or impacts.
  • Enhanced Aesthetics: Adds a stylish and eye-catching element to your motorcycle.
  • Universal Fit: Designed to fit all standard 22mm (7/8") hollow handlebars.
  • Secure Installation: Includes special adapters for secure fitting to most handlebar sizes.
  • Material: Constructed from high-quality CNC Aluminum for durability.
  • Color Options: Available in multiple colors including Black, Red, Blue, Silver, Titanium, Gold, Orange, and Green.
YOWLING Motorcycle Handlebar End Caps in black with blue accents, featuring YZ250 logo.

Figure 2.1: YOWLING Handlebar End Caps (Example: Black with Blue Accents)

3. Specifications

AttributeValue
Brand NameYOWLING
Model NameHandlebar Grips Caps handlebar Ends 22mm
Item TypeCovers & Ornamental Mouldings
MaterialCNC Aluminum
Item Length6.5 inch (approx. 16.5 cm)
Item Width6.5 inch (approx. 16.5 cm)
Item Height7.5 inch (approx. 19 cm)
Item Weight0.132 kg
Condition100% brand new high quality
Quantity1 pair (2 pieces)
Motobike MakeYamaha
FitmentFor YAMAHA YZ250 YZ250 2001-2019 (and other 22mm handlebars)
Item Color OptionsBlack, Blue, Green, Gold, Grey, Red, Silver, Orange
Diagram showing dimensions of the handlebar end caps: 2.5cm/0.984in diameter, 7.5cm/2.95in height, 1cm/1.2in inner diameter.

Figure 3.1: Product Dimensions

4. Installation Guide

These handlebar end caps are designed for easy installation on standard 22mm (7/8") hollow handlebars. Ensure your handlebars are hollow and do not have internal screw holes.

  1. Prepare Handlebar: Ensure the end of your motorcycle's handlebar is clean and free from debris.
  2. Insert Adapter: Take one end cap and insert the expansion adapter into the hollow end of the handlebar.
  3. Tighten Screw: Use an appropriate Allen key (hex wrench) to gently tighten the screw on the end cap. This will expand the adapter inside the handlebar, securing the end cap in place.
  4. Check Security: Once tightened, ensure the end cap is firmly seated and does not wobble.
  5. Repeat for Other Side: Follow the same steps for the other handlebar.
Five-step visual guide for installing motorcycle handlebar end caps. Steps show inserting the adapter, tightening the screw, and the final secured cap.

Figure 4.1: Installation Steps

Diagram showing compatible handlebar types. A hollow straight handle is marked with a check, while a handle with internal screw holes is marked with an X. Text states: 'Installation instructions: If the inner diameter of the handle is too large and the installation is not firm, you can put something to help fix it.'

Figure 4.2: Compatible Handlebar Types and Installation Tip

Important Note: If the inner diameter of your handlebar is slightly too large and the end cap feels loose after tightening, you may use a thin shim or tape around the adapter to ensure a more secure fit.

5. Operating Instructions

Once installed, the handlebar end caps require no specific operation. They function passively by providing protection to the handlebar ends and enhancing the motorcycle's appearance. Regularly check their tightness to ensure they remain securely in place.

6. Maintenance

  • Cleaning: Clean the end caps periodically with a soft cloth and mild soap to remove dirt and grime. Avoid abrasive cleaners that may damage the finish.
  • Inspection: Regularly inspect the end caps for any signs of wear, damage, or looseness.
  • Tightness Check: Periodically re-check the tightness of the mounting screws to ensure the caps are securely fastened. Re-tighten if necessary.
  • Corrosion Prevention: While made of CNC Aluminum, prolonged exposure to harsh weather conditions can affect the finish. Consider applying a protective wax or sealant if desired.

7. Troubleshooting

  • End Cap is Loose:
    • Ensure the internal expansion adapter is correctly positioned.
    • Tighten the screw firmly but do not overtighten.
    • If the handlebar's inner diameter is slightly larger than the adapter's maximum expansion, use a thin shim (e.g., electrical tape) around the adapter for a snug fit before insertion.
  • Difficulty Inserting:
    • Ensure your handlebar is a standard 22mm (7/8") hollow type.
    • Check for any obstructions inside the handlebar.
    • Slightly loosen the expansion screw before insertion to reduce the adapter's diameter.

8. User Tips

  • Color Matching: With 8 color options, you can choose a color that perfectly matches your motorcycle's existing scheme or adds a contrasting accent.
  • Pre-Installation Check: Always measure your handlebar's inner diameter before purchasing to confirm compatibility, especially if your motorcycle is not a Yamaha YZ250.
  • Logo Options: Some variants may come with or without a logo. Consider your preference when selecting.

9. Support

For further assistance or inquiries, please contact the seller or manufacturer. Ensure you have your product details ready when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.