1. Introduction
The Makerbase MKS TS35-R V2.0 is a high-quality 3.5-inch smart touch LCD display designed to enhance the user experience of MKS DLC32 offline control systems, commonly utilized in desktop laser engravers. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your MKS TS35-R V2.0 display.
2. Product Overview
2.1 Features
- Display Type: 3.5-inch TFT Smart Touch LCD
- Resolution: 320x240 pixels
- Compatibility: Seamlessly integrates with MKS DLC32 offline control boards.
- Real-time Monitoring: Displays critical information such as machine status (IDLE), X/Y/Z axis positions, current power settings, engraving speed, and WiFi connection status.
- Intuitive Interface: Features a user-friendly touch interface with dedicated icons for 'Sculpture' (engraving jobs), 'Tool' (tool settings), 'Control' (machine movement), and 'Adjustment' (parameter tuning).
- High-Speed Support: Capable of supporting engraving speeds up to 8000mm/min when paired with the MKS DLC32 main control module, thanks to its high-speed IO flip and powerful timer.
2.2 Package Contents
The standard package for the MKS TS35-R V2.0 includes the following items:
| Item | Description | Quantity |
|---|---|---|
| MKS TS35-R | Smart Touch LCD Display | 1 |
| 40cm flat cable | Connection cable for mainboard | 2 |
3. Setup Instructions
Follow these steps to connect your MKS TS35-R V2.0 display to your MKS DLC32 control board:
- Power Off: Before making any connections, ensure that your MKS DLC32 control board and any connected devices are completely powered off and disconnected from the power source.
- Connect Flat Cable: Locate the display interface port on your MKS DLC32 control board. Connect one end of the provided 40cm flat cable to this port.
- Connect to Display: Connect the other end of the flat cable to the corresponding port on the back of the MKS TS35-R V2.0 display. Ensure the cable is inserted correctly, aligning the pins and ensuring a secure fit.
- Secure Display: Mount the display in your desired location, typically on the enclosure of your laser engraver, using appropriate fasteners (not included).
- Power On: Once all connections are secure, you may power on your MKS DLC32 control board. The MKS TS35-R V2.0 display should power on automatically and show the initial interface.
4. Operating Instructions
The MKS TS35-R V2.0 features an intuitive touch interface for easy control and monitoring of your laser engraver.
4.1 Main Screen Overview
Upon startup, the display will show the main operational screen, providing real-time feedback:
- STATUS: Indicates the current operational state of the machine (e.g., IDLE, RUNNING).
- X POS, Y POS, Z POS: Displays the current coordinates of the laser head.
- Power: Shows the current laser power setting.
- Speed: Indicates the current engraving or movement speed.
- WiFi: Shows the status of the WiFi connection (e.g., Disconnect, Connected).
4.2 Navigation and Functions
The bottom of the screen features four primary touch icons for navigating different functions:
- Sculpture: Tap this icon to access functions related to starting, pausing, or managing engraving jobs. This is where you typically select and initiate your engraving files.
- Tool: This section provides access to various tool-related settings and utilities, such as homing the machine, setting work origins, or performing tool changes if applicable.
- Control: Use this icon for general machine control, including manual movement of the axes (jogging), setting speeds, and other basic operational commands.
- Adjustment: This section allows for fine-tuning of machine parameters, calibration settings, and other advanced configurations.
To interact with the display, simply tap the desired icon or menu option. Use the back button or designated navigation gestures to return to previous screens.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MKS TS35-R V2.0 display.
- Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the screen. For stubborn smudges, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the screen surface.
- Cable Inspection: Periodically inspect the flat cables connecting the display to the control board. Check for any signs of wear, cuts, kinks, or loose connections. Ensure the connectors are firmly seated in their respective ports.
- Environmental Conditions: Operate the display within recommended temperature and humidity ranges. Avoid exposing it to direct sunlight for prolonged periods or to environments with excessive dust or moisture.
6. Troubleshooting
If you encounter issues with your MKS TS35-R V2.0 display, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Display does not power on | Loose cable connection, no power to control board | Check that the flat cable is securely connected at both ends. Ensure the MKS DLC32 control board is powered on. |
| Touchscreen unresponsive | Screen dirty, system freeze | Clean the screen surface. Try restarting the MKS DLC32 control board. |
| "WiFi Disconnect" message | No WiFi network configured or out of range | Verify WiFi settings on the MKS DLC32 board. Ensure the engraver is within range of a configured WiFi network. |
| Incorrect position display | Calibration issues, software error | Check and recalibrate the axis settings on your MKS DLC32 control board. Ensure firmware is up to date. |
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | MKS TS35-R V2.0 |
| Display Type | TFT |
| Screen Size | 3.5 inch |
| Resolution | 320*240 |
| Compatibility | MKS DLC32 Offline Control |
| Max Engraving Speed Support | Up to 8000mm/min (with MKS DLC32) |
| Package Length | 19 cm |
| Package Width | 15 cm |
| Package Height | 5 cm |
| Package Weight | 0.11 kg |
8. User Tips
- Firmware Updates: For optimal performance and access to the latest features, ensure your MKS DLC32 control board's firmware is regularly updated. Refer to the Makerbase official resources for update instructions.
- Backup Settings: Before making significant changes to your machine's configuration or firmware, it is advisable to back up your engraving profiles and settings.
- Power Cycle Safety: Always power off your main control board before connecting or disconnecting the display or any other components to prevent potential damage.
9. Warranty and Support
For detailed warranty information, technical assistance, or further support regarding your Makerbase MKS TS35-R V2.0 display, please refer to the official Makerbase website or contact the authorized retailer from whom you purchased the product. Please retain your purchase receipt as proof of purchase for any warranty claims.
