MICTUNING P1Y

Contents

MICTUNING P1Y Switch Panel User Manual

Model: P1Y

Brand: MICTUNING

Introduction

Thank you for purchasing the MICTUNING P1Y Switch Panel. This advanced system provides centralized control for your vehicle's accessories with features like wireless remote control, customizable RGB lighting, and multiple operating modes. This manual will guide you through the installation, operation, and troubleshooting of your new switch panel.

Product Overview Video: Demonstrates the features and functionality of the MICTUNING P1Y Switch Panel.

Packing List

Please check the contents of your package against the list below:

  • Switch Panel (6-Gang, 8-Gang, or 12-Gang depending on model)
  • Remote Control
  • Control Box
  • Circuit Breaker
  • Antenna
  • Mounting Brackets
  • Wire Harness
  • Adhesive Pad
  • Cable Ties
  • ACC Wire
  • Panel Cover
  • Fasteners
  • Screwdriver
  • Switch Labels (140 pieces)
  • MICTUNING Stickers
MICTUNING P1Y 8-Gang Switch Panel with Remote and accessories

Image: MICTUNING P1Y 8-Gang Switch Panel, remote control, and included accessories.

Specifications

FeatureSpecification
Product TypeSwitches and accessories
Input Voltage12-24V DC
Maximum Power (8-Gang)720W@12V, 1440W@24V
Maximum Power (12-Gang)960W@12V, 1920W@24V
Maximum Current (8-Gang)60A
Maximum Current (12-Gang)80A
Operating Temperature-40°F to 221°F (-40°C to 105°C)
Waterproof RatingIP65
Remote Control RangeUp to 230ft (70m) under unobstructed, ideal conditions

Installation

Switch Panel Installation

The switch panel can be installed using various methods:

  1. Adhesive Mount (6-Gang Panel Only):
    1. Stick the adhesive pad on the back of the panel.
    2. Peel off the other side's backing and stick it on the desired location.
  2. Fix Mount:
    1. Align the bracket with the hole position.
    2. Tighten the flat head screws.
  3. Angle Adjustable Mount:
    1. Tighten the base plate screws.
    2. Tighten the bracket screws.
  4. Middle Plate Mount:
    1. Align the bracket with the hole position.
    2. Tighten the screws.

Control Box Installation

The control box can be installed using a Fix Mount or Middle Plate Mount, similar to the switch panel. Ensure it is placed in a secure and accessible location.

Wiring Diagram

The MICTUNING P1Y Switch Panel simplifies wiring with a centralized control box. Below are the general wiring steps and diagrams.

Easy Wiring Diagram for 8-Gang Switch Panel

Image: Easy Wiring Diagram for the 8-Gang Switch Panel, showing connections to battery, accessories, and antenna.

8-Circuit Fuse Blocks:

CircuitAmperage
Circuit 130A
Circuit 220A
Circuit 315A
Circuit 410A
Circuit 530A
Circuit 620A
Circuit 715A
Circuit 810A

12-Circuit Fuse Blocks:

CircuitAmperage
Circuit 130A
Circuit 230A
Circuit 320A
Circuit 415A
Circuit 510A
Circuit 610A
Circuit 730A
Circuit 830A
Circuit 920A
Circuit 1015A
Circuit 1110A
Circuit 1210A

Control Box Wiring Steps

  1. Connect Battery: Connect the negative terminal of the battery to the negative terminal of the control box, and the positive terminal of the battery to the positive terminal of the control box.
  2. Connect ACC Wire: Connect the white connector of the ACC wire to the control box.
  3. Connect Lights/Devices: Connect the light/device wires to the control box. Negative wires can be connected to the common cathode.
  4. Connect Switch Panel: Connect the switch panel to the control box.
  5. Connect Antenna: Connect the antenna to the control box.
  6. Close Cover: After all wiring is completed, close the cover of the control box.
  7. Position Antenna: Put the antenna on the right A-pillar of the car, exposing it to enhance signal reception.

Operation

Customizing Buttons with Labels

The P1Y Switch Panel comes with 140 switch labels for customization.

  1. Wipe clean the switch panel, ensuring it is dry and free of dust.
  2. Peel off the desired label and firmly stick it onto the panel button.
  3. Once labeling is completed, your buttons are customized for easy control of devices and lights.

6-Level Brightness Adjustment

The switch panel features 6 levels of brightness (0%, 10%, 25%, 50%, 75%, 100%) for optimal visibility in any lighting condition.

  • Short Press Brightness Button: Each short press cycles through the 6 brightness levels.
  • At Night: Adjust to a lower level for comfortable viewing and reduced eye strain.
  • Daytime: Use higher brightness for clear vision and easy operation, ensuring safe driving.
Brightness adjustment for day and night

Image: Demonstrates 6-level brightness adjustment for optimal visibility in different lighting conditions.

4 Control Modes

Each button can be configured with one of four distinct control modes, indicated by a color-coded LED:

  1. Toggle (Red): Press to turn on/off a device.
  2. Momentary (Blue): Activates the device only when the button is pressed and held.
  3. Flash (Purple): Flashes at a slower speed, similar to a turning signal.
  4. Strobe (Green): Strobes like a warning light.
Four control modes: Toggle, Momentary, Strobe, Flash

Image: Visual representation of the four control modes and their corresponding LED colors.

Control Mode Setting:

  1. Enter Control Mode Setting: Long press the Brightness Button until the Red Backlight starts flashing.
  2. Set Button Mode: Press any button you wish to set. The indicator's color will switch each time you press it, representing the 4 control modes (Toggle-Red, Momentary-Blue, Flash-Purple, Strobe-Green). Set all desired buttons to their respective modes.
  3. Exit Setting: Press the On/Off button to exit the setting. If no actions are taken within 10 seconds, the control mode setting will automatically exit.

RGB Colors & Effects

The panel offers 8 RGB backlight colors and 3 lighting effects.

  • Short Press RGB Button: Cycles through 8 RGB colors (Red, Orange, Yellow, Green, Cyan, Blue, Purple, White).
  • Long Press RGB Button (2-3s): Cycles through 3 lighting effects (Gradient, Jumping, Breathing).
  • Long Press RGB Button (7+s): Resets the panel to factory settings.

Wireless Remote Control

The P1Y Switch Panel includes a wireless remote control for convenient operation from a distance.

Wireless Remote Control with 230ft range

Image: Wireless remote control demonstrating its range and magnetic attachment feature.

Pairing the Remote to the Control Box:

  1. Long press the Control Box's pairing button until its indicator slowly flashes.
  2. Long press the remote's ON/OFF button.
  3. When the Control Box's indicator turns solid red, pairing is successful.

Note: To clear pairing, long press the Control Box's pairing button. First, it will flash slowly, then quickly. Release when you see fast flashing—pairing is cleared.

One remote can pair with up to 5 panels, or one panel can connect to up to 5 remotes.

Control with App

The MICTUNING P1Y Switch Panel also supports control via a dedicated mobile application. For app installation and usage instructions, please refer to the official MICTUNING resources, such as their YouTube channel by searching "MICTUNING P1Y App Install".

Maintenance

To ensure the longevity and optimal performance of your MICTUNING P1Y Switch Panel, follow these maintenance guidelines:

  • Cleaning: Regularly wipe the switch panel and control box with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Silicone Cover: For 8-gang and 12-gang panels, utilize the included weatherproof silicone cover to protect against rain, dust, and debris, especially in harsh environments.
  • Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure the circuit breaker is functioning correctly.
  • Fuse Replacement: If a fuse blows, replace it with a new fuse of the SAME or LOWER amperage. Never use a fuse with a higher amperage than specified. For example, replace a 30A fuse with another 30A or less; do NOT use a 10A fuse to replace a 5A fuse.

Troubleshooting

Q: Where should I put the antenna?
A: Please put the antenna on the right A-pillar of the car, exposing it to receive better signal. You may use the antenna sticker to secure it in place.
Q: How does a normal switch panel control 2 or more lights at the same time with one button?
A: Connect the wires of both accessories to the same positive and negative outputs of the control box. Ensure that the accessories connected to a single circuit will not draw more power than the maximum for that control box circuit and its fuse.
Q: Can I connect negative wire to the common cathode?
A: Yes.
Q: What is the maximum running current?
A: The 6-gang or 8-gang is 60A, and the 12-gang is 80A.
Q: When connecting the battery, the power indicator is always on. Will it cause battery loss?
A: No. The standby current of this product is less than 3mA. A 60AH battery provides 833 days of standby power for the switch panel without charging it.
Q: How do I know if the wiring is correct?
A: If the power indicator is red, it means the connection is correct.
Q: What is the function of the control box's power switch?
A: The Control Box Switch provides two ways to obtain power: Connect ACC or Battery. It is suggested to obtain power from the battery.
Q: What is the type of Add-a-Circuit Fuse Tap?
A: Small fuse tap.
Q: Can I replace the fuses in the control box?
A: Yes, BUT always use a new fuse with the SAME or LOWER amperage as the old one. For instance, replace a 30A fuse with another 30A or less; to replace a 5A fuse, do NOT use a 10A fuse.

User Tips

  • For optimal wireless remote performance, ensure the antenna is exposed and positioned on the vehicle's A-pillar.
  • Utilize the provided switch labels to clearly identify each controlled accessory, enhancing ease of use and safety.
  • Adjust the panel's brightness according to ambient light conditions to prevent eye strain during night driving and ensure visibility during the day.
  • Experiment with the different control modes (Toggle, Momentary, Flash, Strobe) to find the most suitable setting for each connected device.

Warranty & Support

MICTUNING stands behind its products with a commitment to quality and customer satisfaction. If you have any questions or require support, please feel free to contact us.

For a comprehensive guide, you can also refer to the official user manual PDF: MICTUNING P1Y User Manual (PDF)

© MICTUNING. All Rights Reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.