MiBoxer K0, K1, K2, K3

Contents

MiBoxer 2.4GHz LED Controller Wireless Remote Instruction Manual

Models: K0, K1, K2, K3 (and their black variants)

Product Overview

The MiBoxer series of 2.4GHz LED controller wireless remotes (K0, K1, K2, K3) are designed to provide convenient control over MiBoxer/Mi-Light 2.4G series lighting products. These remotes feature 2.4GHz wireless transmission technology, offering low power consumption, long transmission distance, strong anti-interference ability, and fast communication speed. They allow for adjustment of brightness and color temperature, and some models support saving scene presets.

MiBoxer K0, K1, K2, K3 remotes in white and black variants
Overview of MiBoxer K0, K1, K2, K3 remotes and their black variants.

Key Features

  • Brightness and color temperature adjustable
  • 2.4GHz wireless transmission technology
  • Support MiBoxer/Mi-Light 2.4G series products
  • Control distance: 30m
  • Magnetic mounting for easy installation
  • Some models support saving up to 4 scene presets
  • Ability to match and control multiple devices simultaneously

Setup and Installation

Battery Installation (K0, K1, K2, K3)

All remotes in this series require battery installation. Batteries are not included and must be purchased separately.

K1/K1-B remote with battery compartment and Link/Unlink button
Rear view of a K1/K1-B remote showing the CR2032 battery compartment and Link/Unlink button.

For K0, K1, K2, K3 remotes:

  1. Open the lower cover of the remote.
  2. Insert the required battery (2*AAA for K0, CR2032 for K1, K2, K3) into the battery compartment, ensuring correct polarity.
  3. Close the lower cover.

Mounting the Remote

The remotes feature magnetic mounting for convenient placement.

Installation steps for K1/K1-B remote
Installation instructions for K1/K1-B remote, showing how to attach the base and then the remote magnetically.

Installation Method 1 (for K0, K1, K3):

  1. Tear off the double-sided tape from the back of the mounting base.
  2. Stick the holder firmly on the desired position on the wall.
  3. Install the battery into the remote.
  4. Put the rotating switch/remote onto the front of the holder; it will attach magnetically.
Installation steps for K2/K2-B remote
Installation instructions for K2/K2-B remote, showing how to attach the base and then the remote magnetically.

Installation Method 2 (for K2):

  1. Tear off the double-sided tape on the back of the base.
  2. Stick the base well. The remote can be magnetically attached to the base.

Linking the Remote to Lights

The controller must be linked with the remote before use.

Linking and Unlinking instructions for MiBoxer remotes
Diagram illustrating the linking and unlinking process for MiBoxer remotes.

Linking Procedure:

  1. Turn off the light for 10 seconds, then turn it on again.
  2. Within 3 seconds of turning on the light, open the lower cover of the remote and press the "SET" key (or Link/Unlink button) 3 times.
  3. The light will flash 3 times slowly, indicating successful linking.

Note: If the light does not flash, linking has failed. Repeat the steps. A remote that is already linked cannot be linked again.

Unlinking the Remote from Lights

Unlinking Procedure:

  1. Turn off the light for 10 seconds, then turn it on again.
  2. Within 3 seconds of turning on the light, open the lower cover of the remote and press the "SET" key (or Link/Unlink button) 5 times.
  3. The light will flash 10 times quickly, indicating successful unlinking.

Note: If the light does not flash, unlinking has failed. Repeat the steps. There is no need to unlink if the light has never been linked.

Operating Instructions

K0 Rotating CCT Scene Remote

K0 remote control layout and functions
K0 remote control layout with ON/OFF, Scene 1-4 buttons, and rotating wheel for adjustments.
  • ON/OFF Button:
    • Short press: Turn the light on or off.
    • Rotate: Dim brightness.
    • Long press (while light is off): Enter night light mode.
    • Long press (while light is on, until indicator blinks): Switch to CCT dimmable mode. Rotate the wheel to dim color temperature. (The device will log out of CCT mode if no operation within 3 seconds).
  • Scene Buttons (1, 2, 3, 4):
    • Short press: Activate the corresponding scene.
    • Long press (3 seconds): Save the current lighting state to the scene. The light will flash once slowly upon successful saving.

K1 Rotating Switch Panel Remote

K1 remote control operation instructions
K1 remote control operation instructions, including short press, rotating, and long press functions.
  • Short press: Turn the light on or off.
  • Rotating: Dim brightness.
  • Long press (while light is off): Enter night light mode.
  • Long press (while light is on, until indicator blinks): Switch to CCT dimmable mode. Rotate the wheel to dim color temperature. (The device will log out of CCT mode if no operation within 3 seconds).

K2 Mini Remote (2.4GHz)

K2 remote control button functions
K2 remote control button functions for ON/OFF, DIM+, DIM-, CCT+, CCT-.
  • ON/OFF Button: Turns the light on or off.
  • DIM+ / DIM- Buttons: Adjust brightness up or down.
  • CCT+ / CCT- Buttons: Adjust color temperature (Cool White / Warm White).

K3 Rotating Wheel Remote

K3 remote control operation instructions
K3 remote control operation instructions, highlighting the rotating wheel for brightness/color temperature and ON/OFF button.
  • ON/OFF Button: Turns the light on or off.
  • Brightness / Color Temperature Rotating Wheel:
    • By default, rotate the wheel to adjust brightness.
    • Long press the ON/OFF key for 3 seconds to enter color temperature adjustment mode. Then, turn the rotating wheel to adjust color temperature.

Care and Maintenance

  • Do not use the remote control in high humidity or high-temperature environments.
  • If the remote control will not be used frequently, remove the battery to prevent leakage and store it in a dry, static-electricity-free area.
  • Clean the remote with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

Troubleshooting

Linking Issues

  • If the light does not flash during the linking process, repeat the linking steps carefully.
  • Ensure the light is turned off for 10 seconds and then turned on again immediately before attempting to link.
  • Confirm that the "SET" key (or Link/Unlink button) is pressed the correct number of times (3 for linking, 5 for unlinking) within 3 seconds of turning on the light.
  • A remote that has already been linked cannot be linked again.

Signal Interference

  • Avoid using the remote control near large metal objects or strong magnetic fields, as this can affect the signal and reduce the control distance.
  • Ensure there are no obstructions between the remote and the receiver that could block the 2.4GHz signal.

Remote Not Responding

  • Check the battery. Replace it if it is low or depleted.
  • Ensure the remote is within the 30m control distance of the lights.
  • Re-link the remote to the lights if necessary.

Specifications

General Specifications (Applicable to K0, K1, K2, K3)

  • Brand Name: HCSOYES (MiBoxer/Mi-Light)
  • Item Type: RGB controller
  • Features: 2.4GHz wireless control
  • Connection Mode: 2.4GHz
  • Controled Method: 2.4GHz
  • Remote Distance: 30m
  • Applicable Lights: MiBoxer/Mi-Light 2.4G series
  • Material: ABS
  • Origin: Mainland China
  • Certification: CCC, CE, ROHS, EMC, LVD, RED
  • High-concerned chemical: None

Model-Specific Parameters

MiBoxer Remote Control Parameters
ParameterK0 Rotating CCT Scene RemoteK1 Rotating Switch Panel RemoteK2 Mini RemoteK3 Rotating Wheel Remote
Product NameRotating CCT Scene RemoteRotating Switch Panel RemoteMini Remote (2.4GHz)Rotating Wheel Remote
Model No.K0 (K0-B)K1 (K1-B)K2 (K2-B)K3 (K3-B)
Working Voltage3V (AAA*2PCS)3V (CR2032 battery)3V (CR2032 battery)3V (CR2032 battery)
Standby Power Consumption6μA<6uA<6uA6μA
Transmitting Power6dBm6dBm6dBm6dBm
RF2.4GHz RF2.4GHz2.4GHz2.4GHz
Control Distance30M30m30m30m
Transmission Frequency2400-2483.5MHz2400-2483.5MHz2400-2483.5MHz2400-2483.5MHz
Modulation MethodGFSKGFSKGFSKGFSK
Working Temperature-10~40°C-10~40°C-10~40°C-10~40°C

Warranty and Support

Warranty Information

This product comes with a 2-year warranty. Please retain your proof of purchase for warranty claims.

Additional Resources

For a detailed user manual in PDF format, please refer to the official documentation available at: MiBoxer User Manual (PDF)

User Tips

  • Easy Pairing: Users have reported that these remotes pair easily with MiBoxer FUT035S+ 2-in-1 controllers, making integration into existing setups straightforward.
  • Battery Life: To maximize battery life, especially for CR2032 models, ensure the remote is stored in a dry place and remove the battery if not in use for extended periods.
  • Magnetic Mounting: Take advantage of the magnetic mounting feature for convenient placement on metallic surfaces or using the provided adhesive base.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.