1. Introduction
This manual provides essential information for the safe and efficient operation of your PowMr Pure Sine Wave Solar Hybrid Inverter. Please read this manual thoroughly before installation and use, and keep it for future reference.
The PowMr Hybrid Solar Inverter is designed to integrate solar power, utility power, and battery power to provide continuous power supply. It features a pure sine wave output, dual MPPT solar charge controllers, and supports both on-grid and off-grid operations.

Figure 1: PowMr Hybrid Inverter (Model POW-HVM10.2M/POW-HVM8.2M) with key features and dimensions (537x390x130mm).
2. Safety Instructions
Please observe the following safety precautions during installation, operation, and maintenance:
- Read all instructions and cautionary markings on the unit and in this manual before operating.
- Do not disassemble the inverter. Refer servicing to qualified personnel.
- Ensure proper grounding of the inverter.
- Disconnect all power sources (solar, battery, utility) before performing any wiring or maintenance.
- Install the inverter in a well-ventilated area, away from flammable materials.
- Avoid exposing the inverter to rain, snow, or liquids.
- Use appropriate tools and personal protective equipment (PPE) during installation.
3. Product Overview
3.1 Features
- Pure sine wave output.
- Dual MPPT (Maximum Power Point Tracking) solar charge controllers.
- Supports on-grid and off-grid operation.
- High efficiency (98%).
- Integrated battery charger.
- LCD display for system status and configuration.
3.2 Package Contents
Verify that all items are included in the package:
- PowMr Hybrid Solar Inverter (POW-HVM10.2M or POW-HVM8.2M)
- User Manual
- Communication Cable (if applicable)
- Mounting Hardware (if applicable)
4. Installation
4.1 Mounting the Inverter
- Choose a suitable location: vertical wall mount, indoors, well-ventilated, protected from direct sunlight, heat, and moisture.
- Ensure sufficient clearance around the inverter for proper heat dissipation.
- Use appropriate mounting hardware to secure the inverter firmly to the wall.
4.2 Wiring Connections
All wiring must be performed by a qualified electrician in accordance with local electrical codes.

Figure 2: Rear view of the inverter with connection terminals. (Specific labels are not visible in the image, general connection types are inferred).
- **Battery Connection:** Connect the battery bank to the designated battery terminals. Ensure correct polarity (positive to positive, negative to negative).
- **Solar Panel Connection:** Connect the solar panel arrays to the dual MPPT input terminals. Verify correct polarity and voltage/current limits.
- **AC Input Connection (Utility/Grid):** Connect the utility grid power to the AC input terminals.
- **AC Output Connection (Load):** Connect your AC loads to the AC output terminals.
- **Grounding:** Connect the inverter to a reliable ground source using the designated grounding terminal.
WARNING: Incorrect wiring can cause severe damage to the inverter, batteries, and connected appliances, and poses a risk of electric shock. Always double-check all connections before applying power.
5. Operating Instructions
5.1 Initial Startup
- After all connections are secure, switch on the battery breaker.
- Switch on the solar panel breaker.
- Switch on the AC input breaker (if connecting to utility grid).
- Switch on the AC output breaker (to power loads).
- The inverter will perform a self-test and the LCD display will show the operating status.
5.2 LCD Display and Buttons
The front panel features an LCD display and buttons for monitoring system status and configuring settings. Refer to the on-screen menus for detailed information on input/output voltage, current, frequency, battery status, and operating modes.
5.3 Operating Modes
The inverter typically supports various operating modes, such as:
- **Utility Priority Mode:** Utility power is the primary source, solar/battery acts as backup.
- **Solar Priority Mode:** Solar power is the primary source, utility/battery acts as backup.
- **Battery Priority Mode:** Battery power is the primary source, solar/utility acts as backup.
- **Grid-Tie with Backup:** Feeds excess solar power to the grid while providing backup power during outages.
Consult the inverter's LCD menu for specific mode selection and configuration options.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your inverter.
- **Cleaning:** Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
- **Connection Check:** Annually inspect all wiring connections for tightness and corrosion. Re-tighten if necessary.
- **Battery Inspection:** Follow the battery manufacturer's maintenance guidelines for your battery bank.
- **Environmental Check:** Ensure the installation environment remains within specified temperature and humidity ranges.
CAUTION: Always disconnect all power sources before performing any maintenance.
7. Troubleshooting
If the inverter is not operating correctly, refer to the following common issues before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power output | Battery disconnected, low battery voltage, AC input disconnected, inverter fault. | Check battery connections and voltage. Verify AC input and output breakers are on. Check for error codes on LCD. |
| Low power output | Overload, insufficient solar input, battery issues. | Reduce load. Check solar panel connections and sunlight conditions. Inspect battery health. |
| Inverter displays error code | Internal fault, over-temperature, over-voltage/under-voltage. | Note the error code and consult the full manual (if available) or contact technical support. Ensure proper ventilation. |
| Solar charging not working | Solar panels disconnected, MPPT fault, insufficient sunlight. | Check solar panel connections. Verify MPPT settings on LCD. Ensure panels are clean and not shaded. |
For persistent issues, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | POW-HVM10.2M, POW-HVM8.2M |
| Brand | PowMr |
| Rated Output Power | 8200W / 10200W |
| Input Voltage (DC) | 48V |
| Output Voltage (AC) | 230V (Nominal: 200/230/240VAC) |
| Output Voltage Range | 195.5~253VAC |
| Output Current | 35.6A / 44.3A |
| Output Frequency | 50/60Hz |
| Maximum AC Input Current | 40A / 50A |
| Maximum Solar Charging Current | 160A / 180A |
| Output Type | Single |
| Inverter Efficiency | 98% |
| Power Factor | 98% |
| Size (L*W*H) | 537*390*130 mm |
| Weight | 14.2 kg |
| Certificate | CE |
| Origin | Mainland China, Guangdong |
9. User Tips
- **System Sizing:** Ensure your solar panel array and battery bank are appropriately sized for your inverter model and energy consumption needs.
- **Ventilation:** Always maintain clear airflow around the inverter to prevent overheating, especially during peak operation.
- **Monitoring:** Regularly check the LCD display for system status and any alerts. Consider remote monitoring solutions if available for your model.
- **Firmware Updates:** Check the manufacturer's website for any available firmware updates to ensure optimal performance and access to new features.
10. Warranty and Support
10.1 Warranty Information
This PowMr Hybrid Solar Inverter comes with a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
Please retain your proof of purchase for warranty claims.
10.2 Technical Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact customer service:
- Email: A1boutiquestore@163.com
When contacting support, please provide your inverter model number (POW-HVM10.2M or POW-HVM8.2M) and a detailed description of the issue.