HIROYASU HW-UV938

Contents

HIROYASU HW-UV938 Multi-Band Walkie Talkie User Manual

Model: HW-UV938 | Brand: HIROYASU

1. Introduction

Thank you for choosing the HIROYASU HW-UV938 Multi-Band Walkie Talkie. This device is a versatile communication tool designed for a wide range of frequencies and applications, offering robust features such as CB, SSB, HF, SW, MW, LW, AM, and FM reception, a powerful 10-watt output, cross-band repeater functionality, NOAA weather alerts, DTMF, and scrambler capabilities. This manual provides essential information for the safe and efficient operation of your new walkie talkie.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 × HIROYASU HW-UV938 Radio Body
  • 1 × 7.4V 2400mAh Li-ion Battery Pack
  • 1 × SMA-Female FM/136-174/400-520MHz High Gain Antenna
  • 1 × Desktop Charger
  • 1 × Type-C Charging Cable
  • 1 × AC Adapter
  • 1 × Belt Clip
  • 1 × Hand Strap
  • 1 × English User Manual
  • 1 × Type-C Programming Cable (Optional)
  • 1 × Shortwave Donut Antenna (Optional)
HIROYASU HW-UV938 package contents including radio, battery, antenna, charger, cables, and accessories.
Figure 2.1: Included components of the HIROYASU HW-UV938 package.

3. Setup

3.1. Battery Installation

  1. Ensure the walkie talkie is powered off.
  2. Align the battery pack with the battery compartment on the back of the radio.
  3. Slide the battery into place until it clicks securely.
Close-up of the HIROYASU HW-UV938 battery pack and its connection points.
Figure 3.1: The 2400mAh rechargeable battery pack for the HW-UV938.

3.2. Antenna Attachment

  1. Locate the antenna connector on the top of the radio.
  2. Screw the provided SMA-Female antenna clockwise onto the connector until it is finger-tight. Do not overtighten.

3.3. Charging the Battery

Before initial use, fully charge the battery. The HW-UV938 supports both desktop charger and direct Type-C charging.

  1. Using the Desktop Charger: Connect the AC adapter to the desktop charger, then plug the adapter into a power outlet. Place the radio (with battery installed) into the charging cradle. The indicator light will show charging status (e.g., red for charging, green for fully charged).
  2. Using Type-C Direct Charging: Connect the Type-C charging cable to the Type-C port on the side of the radio and to a compatible USB power source.
Close-up of the HIROYASU HW-UV938 showing the Type-C charging port and programming port.
Figure 3.2: Type-C charging and programming port location.

4. Operating Instructions

4.1. Power On/Off and Volume

To power on the radio, rotate the top-left knob clockwise. Continue rotating to adjust the volume. Rotate counter-clockwise until it clicks to power off.

4.2. Frequency Range Selection

The HW-UV938 supports a wide range of frequencies. You can select the desired work range through the menu:

  • FM: 64-108MHz (RX)
  • SW: 2.3-30MHz (RX AM)
  • MW: 520-1710KHz (RX AM)
  • LW: 153-279KHz (RX AM)
  • RX: 18-620MHz, 840-1000MHz
  • TX: 18-32MHz, 136-174MHz, 400-520MHz
HIROYASU HW-UV938 displaying various frequency ranges and 10W power output.
Figure 4.1: Overview of supported frequency ranges and power output.

4.3. FM Radio Operation

To access the FM radio:

  1. Enter the FM Radio Menu.
  2. Long press the "# V/M" key to select SW/MW/LW/FM receiving.
HIROYASU HW-UV938 displaying the FM Radio interface with frequency 088.00.
Figure 4.2: FM Radio interface.
Screenshots of the HIROYASU HW-UV938 showing menus for SW, MW, and LW/FM receiving.
Figure 4.3: Menu options for SW, MW, and LW/FM receiving.

4.4. Scanning

The radio supports scanning across its frequency ranges. Refer to the 'Scan Mode' and 'Scan Direction' options within the Basic Settings menu to configure scanning preferences.

4.5. Key Definition

Customize the functions of the side keys and long-press actions through the 'Key Define' menu in Basic Settings.

HIROYASU HW-UV938 displaying the 'Key Define' menu with options for Multi PTT, Side Key 1 S, Side Key 1 L, Side Key 2 S.
Figure 4.4: Key Define menu for custom button functions.

4.6. Scrambler Function

The HW-UV938 includes 8 groups of scramblers for enhanced privacy. Access this feature in the Channel Set menu to select a scrambler group or turn it off.

HIROYASU HW-UV938 displaying the 'Scrambler' menu with options to turn it off or select groups 1, 2, or 3.
Figure 4.5: Scrambler menu for secure communications.

4.7. DTMF (Dual-Tone Multi-Frequency)

The DTMF function allows for sending specific tones for various control purposes. Configure DTMF settings within the Analog Settings menu.

HIROYASU HW-UV938 displaying the 'DTMF Mode' menu with options for Off, TX Start, and TX End.
Figure 4.6: DTMF Mode settings.

4.8. NOAA Weather Forecast

The radio supports NOAA Weather Forecast reception, providing important weather alerts. Access this feature to stay informed about local weather conditions.

HIROYASU HW-UV938 displaying NOAA Weather Channel 07 at 162.525 MHz, with a stormy background.
Figure 4.7: NOAA Weather Forecast display.

4.9. Cross Band Repeater

The cross-band repeater function allows the radio to relay signals between different frequency bands (UHF to VHF or vice-versa) or within the same band (UHF to UHF, VHF to VHF) to extend communication range.

Diagram illustrating the cross-band repeater function, showing U trans U and U trans V modes.
Figure 4.8: Cross-band repeater functionality.

4.10. MIC/Speaker Gain Adjustment

Adjust the microphone (MIC) and speaker (SPK) gain levels to optimize audio quality for your environment. These settings are typically found in the Analog Settings menu.

HIROYASU HW-UV938 displaying options for 1750 Tone, MIC Gain, and SPK Gain adjustment.
Figure 4.9: MIC and SPK Gain adjustment options.

4.11. Frequency Step

The radio offers various frequency step options for precise tuning, including 0.25K, 1.25K, 2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 50K, 100K, 500K, 1M, and 5M.

HIROYASU HW-UV938 displaying the 'Freq Step' menu with various step sizes.
Figure 4.10: Frequency Step selection menu.

4.12. Other Features

  • Multi Standby: Allows monitoring multiple frequencies simultaneously.
  • Talkaround: Enables direct communication between radios without using a repeater.
  • Scan: Automatically searches for active signals.
  • VOX (Voice Operated Transmit): Activates transmission by voice, hands-free.
  • Roger Beep: A tone indicating the end of transmission.
  • Frequency Detect: Helps identify unknown frequencies.
  • CTC/DCS Scan: Scans for CTCSS/DCS tones.
  • AM/FM Rx: Supports both Amplitude Modulation and Frequency Modulation reception.
  • DCS Encryption: Digital Coded Squelch for selective calling and privacy.
  • TOT (Time-Out Timer): Prevents excessively long transmissions.
  • APO (Auto Power Off): Automatically turns off the radio after a period of inactivity.
HIROYASU HW-UV938 displaying a 2.4 inch TFT large screen with frequency information.
Figure 4.11: The 2.4-inch TFT large screen provides clear information.
HIROYASU HW-UV938 displaying a spectrum analyzer view.
Figure 4.12: Spectrum Analyzer display for signal visualization.
HIROYASU HW-UV938 displaying a signal strength meter.
Figure 4.13: Signal Strength Meter Display.

5. User Tips

  • GPS Functionality: Please note that the HIROYASU HW-UV938 does not include a built-in GPS module. Any GPS-related features mentioned in the menu are optional extensions that would require additional hardware or software.
  • Programming: For advanced customization and programming, a Type-C Programming Cable (optional accessory) is required. This allows connection to a computer for software-based configuration.

6. Maintenance

6.1. General Care

  • Clean the radio with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Keep the radio dry. Avoid exposure to rain, moisture, or extreme temperatures.
  • Do not drop or subject the radio to severe impacts.

6.2. Battery Care

  • Always use the original or approved replacement battery and charger.
  • Do not short-circuit the battery terminals.
  • Do not dispose of batteries in fire.
  • If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.

7. Troubleshooting

  • No Power: Check if the battery is properly installed and charged. Ensure the power/volume knob is turned on.
  • Poor Reception/Transmission: Verify the antenna is securely attached. Check the selected frequency and ensure it is within the radio's operating range. Adjust squelch level if necessary.
  • No Audio: Check the volume level. Ensure no headphones are connected if you expect audio from the speaker.
  • Radio Not Responding: Try turning the radio off and then on again. If the issue persists, remove and reinsert the battery.

8. Specifications

CategorySpecification
General
Frequency RangeFM: 64-108MHz (RX)
SW: 2.3-30MHz (RX AM)
MW: 520-1710KHz (RX AM)
LW: 153-279KHz (RX AM)
Rx: 18-620MHz, 840-1000MHz
Tx: 18-32MHz, 136-174MHz, 400-520MHz
Channel Capacity1024 Channels + 3 VFO Channels
Channel Spacing (W/N)Analog: 25kHz/12.5kHz, Digital: 12.5K
Voltage7.4V DC
Working ModeSame Frequency simplex, different frequency simplex
AntennaRemovable Antenna
Frequency Stability±2.5ppm
Working Temperature-20°C ~ 60°C
Dimension149*64*37mm
WeightAbout 307g
Transmitting
Power≤10W
Modulation ModeF3E
Maximum Deviation (W/N)≤5KHz/≤2.5KHz
SNR (W/N)-45dB/-40dB
Tx Current≤3000mA
Receiving
Sensitivity (W/N)0.22uV/0.25uV 12dB SINAD
Inter Modulation (W/N)65dB/60dB
Audio Distortion<5%
Audio Output Power≤1W (16ohm)
RX Current≤350mA
Standby Current≤100mA

Note: The above parameters are subject to change due to technical improvement without prior notice or liability.

9. Warranty & Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

10. Product Demonstration Video

Video 10.1: Unboxing and basic menu navigation demonstration of the HIROYASU HW-UV938.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.