SoBuy FSR117

Contents

SoBuy FSR117 Shoe Bench with Storage and Seat

Model: FSR117 | Brand: SoBuy

1. Introduction

Thank you for choosing the SoBuy FSR117 Shoe Bench. This versatile piece of furniture combines a comfortable seating area with practical storage for your shoes and accessories. Designed with a minimalist modern aesthetic, it is perfect for hallways, entryways, bedrooms, or living rooms. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new shoe bench.

SoBuy FSR117 Shoe Bench in an entryway with coat rack and shelves

Image: SoBuy FSR117 Shoe Bench in a modern entryway setting.

2. Safety Instructions

  • Read all instructions carefully before assembly and use.
  • Ensure all parts and hardware are present before beginning assembly.
  • Assemble the unit on a soft, clean surface to prevent scratches.
  • Do not overtighten screws, as this may damage the material.
  • Keep small parts and packaging materials away from children during assembly.
  • Place the assembled bench on a flat, stable surface.
  • Do not exceed the maximum load capacity of 150 kg (330 lbs) for the bench seat.
  • Periodically check all connections and re-tighten if necessary.

3. Package Contents

Please verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

Diagram of all parts and hardware included with the SoBuy FSR117 shoe bench

Image: Overview of all furniture parts and hardware.

Furniture Parts

No.DescriptionQty
1Top Panel1
2Base Panel1
3Side Panel (Right)1
4Side Panel (Left)1
5Middle Divider1
6Door2
7Back Panel Support1
8Adjustable Shelf2
9Back Panel1
10Top Shelf1
11Bottom Frame Support2
12Feet4

Hardware

No.DescriptionQty
AM6*35 Screw8
BΦ15*10 Cam Lock8
CM6*40 Screw4
DM4*25 Screw12
EM4*35 Screw6
FM2.5*10 Screw16
GΦ6*30 Dowel10
HM4*14 Screw16
JHinge4
KΦ5*17 Shelf Pin8
LAllen Key1
MΦ25*3 Felt Pad4

4. Setup and Assembly

Follow these step-by-step instructions carefully. It is recommended to have a second person for some steps, though assembly can be done by one person.

General Bolt Installation Guide

Diagram showing correct and incorrect bolt installation methods

Image: Guide for correctly inserting bolts and connecting pieces. Ensure the connecting piece direction is correct before inserting the bolt.

Assembly Steps

  1. Step 1: Prepare the Base Panel
    Attach cam locks (B) and screws (A) to the base panel (1). Ensure they are securely fastened but do not overtighten.
  2. Step 2: Assemble Top Section
    Attach side panels (4, 5) to the top panel (7) using screws (A) and dowels (G). Make sure the dowels align with the pre-drilled holes.
  3. Step 3: Connect Side Panels
    Connect side panels (3, 4, 5) using cam locks (B) and dowels (G). Ensure all panels fit snugly together.
  4. Step 4: Insert Screws for Shelves
    Insert screws (E) into the designated holes on the side panels. These will support the adjustable shelves.
  5. Step 5: Assemble the Base Frame
    Assemble the bottom frame supports (11) with screws (C). Attach the feet (12) to this frame and apply felt pads (M) to the bottom of the feet to protect your floor.
  6. Step 6: Attach Base Frame to Main Unit
    Carefully attach the assembled base frame to the main unit using screws (D). Ensure it is centered and secure.
  7. Step 7: Attach Back Panel
    Attach the back panel (9) to the rear of the unit using screws (F). Ensure the panel is flush with the edges.
  8. Step 8: Prepare Doors
    Attach hinges (J) to the doors (6) using screws (H). Ensure the hinges are oriented correctly.
  9. Step 9: Install Shelf Pins
    Insert shelf pins (K) into the desired holes for the adjustable shelves (8). There are multiple height options for customization.
  10. Step 10: Attach Doors
    Attach the prepared doors (6) to the main unit using the hinges (J) and screws (H).
  11. Step 11: Adjust Doors
    Adjust the hinges to ensure proper door alignment and smooth opening/closing.
Diagram showing the dimensions of the SoBuy FSR117 shoe bench

Image: Dimensions of the assembled shoe bench.

For a complete visual guide, you can also refer to the official PDF user manual available at: SoBuy FSR117 User Manual (PDF)

5. Operating Instructions

Storage

  • Utilize the internal compartments for organizing shoes, handbags, and other entryway essentials.
  • The two adjustable shelves (8) can be positioned at three different heights to accommodate various shoe sizes and types, from flats to boots.

Seating

  • The padded top provides a comfortable seat for putting on or taking off shoes.
  • Ensure the weight on the bench does not exceed the maximum load capacity of 150 kg (330 lbs).
SoBuy FSR117 Shoe Bench with doors open, showing shoes stored inside

Image: Interior view of the shoe bench showing storage capacity.

6. Maintenance

Cleaning

  • For the MDF and bamboo surfaces, wipe with a soft, slightly damp cloth.
  • Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
  • For the fabric cushion, spot clean with a mild detergent and a damp cloth. Allow to air dry completely.

General Care

  • Periodically check all screws and connections to ensure they are tight. Re-tighten if necessary to maintain stability.
  • Avoid placing hot items directly on the surface.
  • Keep the bench away from direct sunlight and excessive moisture to prevent warping or discoloration.

7. Troubleshooting

  • Bench is Wobbly:
    Ensure all screws are fully tightened. Check that the bench is placed on a flat and level surface. If the floor is uneven, consider using furniture pads to level it.
  • Doors are Not Aligning Properly:
    Adjust the hinges as shown in Step 11 of the assembly instructions. Most hinges allow for minor adjustments in height, depth, and side-to-side positioning.
  • Missing or Damaged Parts:
    If you find any parts missing or damaged upon unboxing, please contact SoBuy customer support immediately with your purchase details.

8. Specifications

FeatureDetail
ModelFSR117
Color OptionsWhite / Natural / Khaki
MaterialMDF (E1) / Bamboo
Product Dimensions (W x H x D)90 x 46 x 34 cm (35.4 x 18.1 x 13.4 inches)
Load Capacity (Bench Seat)Up to 150 kg (330 lbs)
Storage Compartments4 (behind 2 doors)
Adjustable Shelves2 shelves, 3 height options
StyleMinimalist Modern

9. User Tips

  • Assembly Time: Many users find that assembly can be completed by one person in approximately 45 minutes. Having a clear workspace and organizing parts beforehand can help.
  • Cushion Use: The top cushion provides comfort and is designed to rest securely on the bench. While it can be lifted, it is not intended for frequent removal.
  • Versatile Placement: This bench is not only functional for shoes but can also serve as extra seating or a decorative piece in various rooms.

10. Warranty and Support

SoBuy products are designed for quality and durability. For any questions regarding your SoBuy FSR117 Shoe Bench, including warranty claims, missing parts, or assembly assistance, please contact SoBuy customer support. Please have your purchase details and model number (FSR117) ready when contacting support.

© 2024 SoBuy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.