SUMRY ECO LV 3.6KW / HGX4KW

Contents

SUMRY 3.6/4kW Hybrid Solar Inverter User Manual

Models: ECO LV 3.6KW / HGX4KW

Sustainable Power Solutions for You: Safe, Efficient, Green

1. Introduction

This manual provides essential information for the safe and efficient operation of your SUMRY 3.6/4kW Hybrid Solar Inverter. This advanced inverter is designed to provide reliable, clean, and quiet AC energy for various applications, including household, RV, camping, and emergency power needs. It features a pure sine wave output, an integrated MPPT solar charge controller, and comprehensive protection mechanisms.

Please read this manual thoroughly before installation and operation to ensure proper usage and to maximize the lifespan of your inverter.

SUMRY Hybrid Solar Inverter integrated into a home solar system.
SUMRY Hybrid Solar Inverter integrated into a home solar system.

2. Safety Information

WARNING: High Voltage! Installation and maintenance should only be performed by qualified personnel.

  • Ensure all wiring is correctly connected and securely fastened before operation.
  • Do not attempt to open or repair the inverter yourself. Refer to qualified service personnel.
  • Keep the inverter away from water, flammable materials, and corrosive substances.
  • Ensure adequate ventilation around the inverter to prevent overheating.
  • Always disconnect all power sources (AC, PV, Battery) before performing any maintenance or wiring.
  • Install appropriate circuit breakers as specified in the installation section.

3. Product Overview

The SUMRY Hybrid Solar Inverter is available in two main models: ECO LV 3.6KW and HGX4KW, both offering robust performance for your solar energy needs.

Overview of SUMRY HGX (110V) and MPS-VIII ECO Series Hybrid Solar Inverters, highlighting key specifications.
Overview of SUMRY HGX (110V) and MPS-VIII ECO Series Hybrid Solar Inverters, highlighting key specifications.

3.1 Key Features

  • Pure Sine Wave Output: Provides clean and stable power, compatible with over 98% of electrical appliances.
  • Integrated MPPT Solar Charge Controller: Maximizes solar power harvesting (120A for ECO LV 3.6KW, 140A for HGX4KW).
  • Flexible Operation: Supports on-grid and off-grid modes, and can run without a battery (HGX4KW model).
  • Wide PV Input Voltage Range: 60-500VDC for ECO LV 3.6KW, 55-350VDC for HGX4KW.
  • Intelligent Cooling Fan: Sensor chip adjusts fan speed based on ambient temperature.
  • Comprehensive Protection: Includes overload, short circuit, battery, overheating, overcurrent, high/low voltage, anti-reverse, and energy fallout protection.
  • Communication: RS232/RS485 ports.
  • WiFi Module: Free WiFi module included for remote monitoring via iOS/Android app (shipped separately).
  • Battery Compatibility: Supports various 24V battery types including GEL, Lithium, AGM, and user-defined settings.
SUMRY Hybrid Solar Inverter with included WiFi module for remote monitoring.
SUMRY Hybrid Solar Inverter with included WiFi module for remote monitoring.

3.2 Rear Panel Connections

Rear panel view of the inverter showing connection terminals for AC In, Main Out, Second Out, Battery, PV In, and Communication ports.
Rear panel view of the inverter showing connection terminals for AC In, Main Out, Second Out, Battery, PV In, and Communication ports.

The rear panel provides the following connection points:

  • AC IN: For connecting to the utility grid.
  • MAIN OUT: Primary AC output for loads.
  • SECOND OUT: Secondary AC output for loads (if applicable to model).
  • BATTERY (+/-): For connecting to the battery bank.
  • PV IN (+/-): For connecting to the solar panel array.
  • COMM: Communication ports (RS232/RS485) for monitoring and configuration.
  • Ground Terminal: For safety grounding.

4. Installation

Before installing, ensure the inverter is turned off and all power sources are disconnected.

4.1 Circuit Breaker Installation

It is highly recommended to install circuit breakers in the following four positions to ensure safety and proper operation:

  1. Between the battery pack and the inverter battery input.
  2. Between the solar panel and the photovoltaic input of the inverter.
  3. Between the power input of the grid and the inverter.
  4. Between the inverter output and the load.

The circuit breaker effectively prevents misconnection or reverse connection of the mains input and inverter output. In case of a short circuit, load short circuit, or overload in the output, the circuit breaker will cut off the circuit to protect the inverter.

Installation knowledge diagram showing recommended circuit breaker placement for battery, solar panel, grid, and inverter output.
Installation knowledge diagram showing recommended circuit breaker placement for battery, solar panel, grid, and inverter output.

4.2 Wiring Connections

Follow the detailed wiring diagram below for proper connection of your hybrid solar inverter. Ensure all connections are tight and correct polarity is observed.

Detailed wiring diagram for 24V 3.6KW and 48V 6.2KW models, showing connections for generator/mains, battery, solar panels, and AC loads, with wire color coding.
Detailed wiring diagram for 24V 3.6KW and 48V 6.2KW models, showing connections for generator/mains, battery, solar panels, and AC loads, with wire color coding.
  1. Battery Connection: Connect the 24V battery bank to the BATTERY terminals (+ and -) on the inverter. Ensure correct polarity (red for positive, black for negative). Recommended battery wire: 2AWG.
  2. PV Input Connection: Connect the solar panel array to the PV IN terminals (+ and -). Observe correct polarity.
  3. AC Input Connection (Generator/Mains Power): Connect the AC input (utility grid or generator) to the AC IN terminals (L, N). Suggested cable: 12AWG / 1.2Nm. Max AC Input Current: 40A/80A depending on model.
  4. AC Output Connection (Loads): Connect your household appliances to the MAIN OUT and SECOND OUT terminals (L, N). Recommended breaker: 32A.
  5. Communication Port: Connect the WiFi module or other communication devices to the COMM port (RS232/RS485).
  6. Grounding: Connect the inverter to a reliable ground source using the ground terminal.

Note: The free WiFi module must be sent from China. Please contact customer service for tracking information after placing your order.

Video: Unboxing and basic connection demonstration, including charging a phone and boiling water.

5. Operating Modes

The inverter offers multiple operating modes to suit various energy management strategies:

Diagram of the four working modes: Solar Charging, Electricity Utility Priority, Solar Priority, Hybrid Charging, with built-in 140A MPPT.
Diagram of the four working modes: Solar Charging, Electricity Utility Priority, Solar Priority, Hybrid Charging.
  • Solar Charging: Prioritizes charging batteries from solar panels.
  • Electricity Utility Priority: Prioritizes utility grid power for loads, using solar/battery as backup.
  • Solar Priority: Prioritizes solar power for loads, using utility/battery as backup.
  • Hybrid Charging: Combines solar and utility power for charging and powering loads.

The inverter also features three safe charging modes and two output modes:

Diagram illustrating the three safe charging modes (Solar First, Solar and Utility, Only Solar) and two output modes (SUB, SBU) for the inverter.
Diagram illustrating the three safe charging modes (Solar First, Solar and Utility, Only Solar) and two output modes (SUB, SBU) for the inverter.
  • Charging Modes: Solar First, Solar and Utility, Only Solar.
  • Output Modes: SUB (Solar-Utility-Battery), SBU (Solar-Battery-Utility).

These modes can be configured via the LCD display and touchable buttons, or through the WiFi monitoring app.

6. Specifications

Below are the detailed specifications for the SUMRY Hybrid Solar Inverter models.

Product Data Sheet for VICTOR NM-ECO-LV-3.6KW PLUS and VICTOR NM-ECO-LV-6.2KWPLUS models, detailing input, output, battery & charger, solar charger, grid output, general, and interface specifications.
Product Data Sheet for VICTOR NM-ECO-LV-3.6KW PLUS and VICTOR NM-ECO-LV-6.2KWPLUS models.
Product Data Sheet for HGX (110V) 4KW model, detailing input, output, battery & AC charger, solar charger, grid output, efficiency, physical, and communication interface specifications.
Product Data Sheet for HGX (110V) 4KW model.
ParameterECO LV 3.6KWHGX 4KW (110V)
ModelVICTOR NM-ECO-LV-3.6KW PLUSHGX (110V) 4KW
Rated Power3600W/3800VA4000W
Nominal DC Voltage24VDC24VDC
AC Output Voltage120VAC (100/105/115V settable)120VAC ±5%
Frequency Range50Hz/60Hz50Hz/60Hz (Autosensing)
Wave FormPure Sine WavePure Sine Wave
Max. PV Input Power4200W4200W
MPPT Voltage Range60-450VDC55-280VDC
Max. Solar Charging Current120A140A
Max. AC Charging Current100A110A
Max. AC Input Current40A40A
Efficiency (Peak) PV to INV98%97%
Efficiency (Peak) BAT to INV94%94%
Dimensions (H*W*D)500*415*180mm50*41.5*18cm
Net Weight8.8 kg10 kg
Communication InterfaceRS232/RS485/WIFI/GPRS/Lithium BatteryCOM port (Standard), LCD remote/WiFi (Optional)
Operating Environment Humidity5% to 95% Relative Humidity (Non-condensing)5% to 95% Relative Humidity (Non-condensing)
Operating Temperature-15°C to 50°C-15°C to 50°C
CertificationCECE

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris. The built-in anti-dust kit helps in harsh environments.
  • Connections: Regularly check all wiring connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
  • Battery Health: Monitor your battery bank's health according to the battery manufacturer's guidelines. The inverter's smart battery charge design helps optimize battery life.
  • Firmware Updates: Check the manufacturer's website or app for any available firmware updates to ensure your inverter has the latest features and bug fixes.
  • Environmental Check: Ensure the operating environment remains within specified temperature and humidity ranges.

8. Troubleshooting

This section covers common issues and their potential solutions. For complex problems, contact technical support.

  • Inverter Not Turning On:
    - Check battery connections and voltage. Ensure batteries are charged.
    - Verify AC input connection if operating in utility-dependent modes.
    - Check all circuit breakers for trips.
  • No AC Output:
    - Check if the inverter is in the correct operating mode.
    - Verify AC output wiring and load connections.
    - Check for overload conditions; reduce connected loads.
    - Ensure the inverter is not in a fault state (check LCD display for error codes).
  • Low Power Output / Inconsistent Performance:
    - Check PV input voltage and current from solar panels.
    - Ensure solar panels are clean and not shaded.
    - Verify battery health and charge level.
  • Overheating Warning:
    - Ensure adequate ventilation around the inverter. Clear any obstructions from cooling fans.
    - Check ambient temperature; it should be within the specified operating range.
  • WiFi Module Not Connecting:
    - Ensure the WiFi module is correctly installed and powered.
    - Check your network settings and ensure the inverter is within WiFi range.
    - Refer to the WiFi module's specific instructions for setup.

9. User Tips

  • Battery-less Operation (HGX4KW): If you have the HGX4KW model, you can power loads directly from your PV array without a battery connected. This is useful for daytime loads or as a direct solar power supply.
  • Remote Monitoring: Utilize the free WiFi module and the dedicated app to monitor your system's performance, battery status, and energy flow from your smartphone.
  • Prioritize Energy Sources: Experiment with the different operating modes (Solar Priority, Utility Priority, SBU, SUB) to find the most efficient setup for your specific energy consumption patterns and local utility rates.
  • Appliance Compatibility: The pure sine wave output ensures compatibility with sensitive electronics. Feel confident powering a wide range of household appliances, from refrigerators to computers.

10. Warranty and Support

Your SUMRY Hybrid Solar Inverter comes with a 1-year warranty, ensuring peace of mind regarding product quality and performance.

For technical support, troubleshooting assistance, or warranty claims, please contact your seller or the manufacturer directly. Ensure you have your product model and serial number ready for faster service.

Contact Information:
WhatsApp: +852 46091341
Email: ajie7221@gmail.com
Working Hours: 9:00-22:30 am (Beijing time)

© 2024 SUMRY. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.