1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Runxin F65P1 Automatic Water Softening Valve. Please read this manual thoroughly before installation and use, and keep it for future reference.
The Runxin F65P1 is an automatic multi-way valve designed for water softening systems, featuring a time-based regeneration method and a digital head controller for easy programming and monitoring.
2. Safety Information
- Always disconnect power before performing any maintenance or service.
- Ensure all plumbing connections are secure and leak-free to prevent water damage.
- Do not operate the valve if it is damaged or malfunctioning.
- Installation should be performed by a qualified professional if you are unsure about plumbing or electrical connections.
- Keep children and unauthorized personnel away from the unit during operation and maintenance.
3. Package Contents
Verify that all items are present in your package:
- Runxin F65P1 Automatic Softening Valve
- Power Adapter
- Inlet/Outlet Connectors
- Drain Connector
- Salt Suction Connector
- O-rings and Gaskets
- User Manual (this document)

4. Specifications
| Feature | Specification |
|---|---|
| Product Model | 64502 (F65P1) |
| Recycling Method | Softening/Time Type |
| Installation Method | Top Mount |
| Inlet/Export Port | 3/4"m (6 points external teeth) |
| Drain Outlet | 1/2"m (4 points external teeth) |
| Salt Suction Mouth | 3/8"m (3 points external teeth) |
| Tank Base Mouth | 2.5"-8NPSM |
| Center Tube | 1.05" OD |
| Suitable for Tank Size | 6" ~ 12" |
| Water Production Capacity | 2 tons/hour |
| Material | Plastic |

5. Setup and Installation
Proper installation is crucial for the optimal performance of your water softening system. It is recommended to have this unit installed by a certified plumber.
5.1 Pre-Installation Checklist
- Ensure you have all necessary plumbing tools and materials.
- Confirm the installation location provides adequate space, drainage, and protection from freezing temperatures.
- Verify the water pressure and temperature are within the recommended operating range for water softening systems.
5.2 Installation Steps
- Prepare the Softener Tank: Ensure the resin tank is clean and ready for the valve. The F65P1 is a top-mount valve, designed to screw directly onto a tank with a 2.5"-8NPSM tank base mouth and a 1.05" OD center tube.
- Install the Valve Head: Carefully screw the F65P1 valve head onto the top of the resin tank. Ensure the center tube aligns correctly and the connection is hand-tight, then use a wrench for a final snug fit, being careful not to overtighten.
- Connect Inlet/Outlet: Identify the inlet and outlet ports on the valve (3/4"m, 6 points external teeth). Connect your main water supply line to the inlet and the softened water line to the outlet. Use appropriate plumbing fittings and ensure all connections are watertight.
- Connect Drain Line: Attach a drain line to the drain outlet (1/2"m, 4 points external teeth). Route this line to an appropriate drain, ensuring there is an air gap to prevent back-siphonage.
- Connect Salt Suction Line: Connect the salt suction line to the 3/8"m (3 points external teeth) port on the valve and route it to your brine tank.
- Power Connection: Plug the power adapter into the valve and then into a suitable electrical outlet.
- Check for Leaks: Slowly turn on the main water supply and carefully inspect all connections for leaks. Address any leaks immediately.
6. Operating Instructions
The F65P1 valve features a digital display and control buttons for easy programming and monitoring of your water softening system.

6.1 Initial Startup and Programming
- Set Current Time: Upon initial power-up or after a power outage, the display may flash. Use the control buttons (refer to the valve's specific button labels, typically 'Up', 'Down', 'Set', 'Regen') to set the current time.
- Program Regeneration Time: As a "Softening/Time Type" valve, you will need to program the desired time for automatic regeneration cycles. Consult the detailed programming instructions that came with your specific valve model for precise steps. This typically involves entering a programming mode and setting the hour and minute for regeneration.
- Initiate Manual Regeneration (Optional): After initial setup, you may want to initiate a manual regeneration cycle to ensure the system is fully operational and to flush out any air. Refer to your valve's specific instructions for initiating a manual regeneration.
6.2 Normal Operation
Once programmed, the F65P1 valve will automatically manage the water softening process and initiate regeneration cycles based on the set time. The display will typically show the current time or the days remaining until the next regeneration.
- Monitoring: Periodically check the display to ensure the valve is operating as expected.
- Salt Level: Regularly check the salt level in your brine tank and replenish as needed. The system relies on salt for regeneration.
7. Maintenance
Regular maintenance ensures the longevity and efficiency of your Runxin F65P1 valve and water softening system.
- Salt Bridge Prevention: Periodically check the brine tank for "salt bridges" (a crust of salt that forms, preventing salt from dissolving). Break up any bridges with a broom handle or similar tool.
- Brine Tank Cleaning: Every few years, or if you notice issues, clean out the brine tank. This involves draining the water, removing any sludge, and rinsing thoroughly.
- Injector Cleaning: If water flow or regeneration performance decreases, the injector may be clogged. Refer to a service professional or detailed service manual for instructions on cleaning the injector.
- Resin Bed Maintenance: Over time, the resin beads can become fouled. Specialized resin cleaners can be used to restore performance.
8. Troubleshooting
This section addresses common issues you might encounter with your water softening valve.
| Problem | Possible Cause | Solution |
|---|---|---|
| No soft water |
|
|
| Excessive salt usage |
|
|
| Low water pressure |
|
|
| Valve display not working |
|
|
9. User Tips
- Always use high-quality water softener salt for best results and to prevent issues like salt bridging.
- Consider installing a pre-filter before your water softener to protect the valve and resin from sediment.
- If you experience frequent power outages, consider a battery backup for the valve's programming, if available, or be prepared to reset the time after each outage.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.