1. Introduction
The Jikong JK Smart Battery Management System (BMS) is an advanced active equalizer balancer designed for various battery chemistries, including LiFePO4, Li-ion, and LTO. It provides active energy transfer balancing to ensure optimal performance and longevity of your battery packs. This manual provides essential information for the safe and effective installation, operation, and maintenance of your JK Smart BMS.
2. Features
- Supports 2-24 cell battery packs.
- Active, balanced energy transfer with a cell voltage delta of ≤ 5mV.
- Cell voltage acquisition range: 1V ~ 5V, with ±5mV accuracy.
- Compatible with all common battery types on the market (Li-ion, LiFePO4, LTO).
- Balance current is independently settable within the range of 0.1 ~ 10A (depending on model, e.g., 1A, 2A, 5A, 10A).
- Supports balanced cascades for battery packs with more than 16 cells.
- Built-in Bluetooth function with a mobile application for Android and iOS devices.
- Balance-Wire resistance detection to identify wiring errors proactively.
- Operating power supply: 40V~100V, can be powered by the battery pack itself or an external source.
- Six security protection features: Over charge, Short circuit, Over discharge, Over current, ALL-IN (cable drop/poor contact), Over temperature.
3. Specifications
| Attribute | Value |
|---|---|
| Model Number | B5A24S (Refer to product title for specific model purchased) |
| Accessory Type | Battery Accessories |
| Equalizing Current | 1A/2A/5A/10A (Varies by model) |
| Balanced Cascade | 24S Supported |
| Other Interfaces | CAN/RS485 Supported (Optional) |
| Power Supply Mode | Battery pack self powered or external power supply |
| Equalizing Mode | Non energy consumption energy transfer active equalization technology |
| Applicable Battery Type | Li-ion, LiFePO4, LTO |
| Communication Function | Built-in Bluetooth support Android/IOS APP |
| Power Consumption | Work mode 10mA@100V, Idle mode 6mA@100V |
| Temperature Range | -20℃~70℃ |
| Condition | New |
| Certification | CE |
| Origin | Mainland China |
Model Dimensions and Weights:

Image: Jikong JK Smart BMS models B4A24S and B2A24S, showing their physical dimensions and net weights. The B4A24S measures 15.5*12.8*2.4cm (front) / 17.7*12.8*2.4cm (back extension spacer) and weighs 549g. The B2A24S measures 13.5*9.9*1.9cm (front) / 15.8*9.9*1.9cm (back extension spacer) and weighs 371g.
4. Setup
4.1 Unboxing and Component Identification
Upon receiving your JK Smart BMS, carefully unbox the components. The package typically includes the balancer unit, balance wires, and an adapter board. Some full sets may come in a protective case with additional accessories like alligator clips.
Video: An unboxing and connection demonstration for the JK Smart B10A24S Balancer, showing the components and initial setup steps.

Image: A full set of the JK-B10A24S balancer, including the main unit, balance wires, and an adapter board, neatly arranged in a protective case.

Image: A close-up view of the JK-B5A24S balancer unit, highlighting the ports where the balance wires are connected.
4.2 Wiring Diagrams and Connection Methods
Correct wiring is critical for the safe and proper functioning of the BMS. Always ensure power is disconnected from the battery pack before making any connections.
General Wiring Principle:
The BMS connects to each cell in your battery pack to monitor individual cell voltages and perform active balancing. The 'B-' terminal connects to the negative terminal of the first cell, and subsequent connections (B1, B2, ..., B24) connect to the positive terminals of each cell in sequence. The 'B+' terminal connects to the positive terminal of the last cell.

Image: Detailed wiring diagrams for JK Smart BMS, illustrating connections for battery packs with various cell counts (24S, 20S, 17S, 16S, 14S, 13S, 8S, 7S for Li-ion). Pay close attention to the sequence of B- to B+ connections and the placement of the temperature sensor (Temp sensor).

Image: Physical connection diagrams for 24S, 20S, 17S, and 13S battery configurations. Also shows a step-up module connection (3S as sample) for when the battery pack voltage is below 40V, allowing cooperation with a boost module to power the equalizer.
Application Method of Active Equalization Module (Usage 1: Temporary Repair Equalization):
If you need to balance a battery pack that has a protection board, you can use the active equalization module for temporary repair equalization. This involves pulling out the battery pack protection board cable and using an adapter board to connect the active equalization module.

Image: Illustrates three connection methods for the active equalization module: 1. Patch cord connection method, 2. Converter connection method, and 3. Equipment patch cord connection method. In all methods, the black line is inserted in sequence according to the jack size and direction, starting with B-.
5. Operating Instructions
5.1 Powering On
Once all wiring is securely connected according to the diagrams, the BMS will typically power on automatically if the battery pack voltage is within the operating range (40V-100V). If using an external power supply, ensure it is connected and providing the correct voltage.
5.2 Mobile APP Operation
The Jikong JK Smart BMS features built-in Bluetooth for monitoring and control via a dedicated mobile application available for Android and iOS. Download the official app from your device's app store.

Image: Screenshots of the mobile application interface, displaying real-time balance status. The app shows balance current, battery voltage, average cell voltage, delta voltage, individual cell voltages (01-24), and cell wire resistance. Both English and Chinese versions are shown.
Through the app, you can:
- Monitor real-time cell voltages and overall battery pack voltage.
- View the balance current and delta voltage between cells.
- Check the status of active balancing.
- Detect cell wire resistance to identify potential connection issues.
- Access settings and control functions (specific functions may vary by model and app version).
6. Maintenance
- Keep the BMS unit clean and free from dust and moisture.
- Regularly inspect all wiring connections for tightness and signs of wear or corrosion.
- Ensure the operating temperature remains within the specified range of -20℃ to 70℃ to prevent damage.
- Periodically check the mobile app to monitor battery health and balancing activity.
7. Troubleshooting
Common Issues and Solutions:
- BMS not powering on: Check all power connections and ensure the battery pack voltage is within the 40V-100V operating range. If using an external power supply, verify its output.
- Balancing not occurring or inconsistent: Verify all balance wire connections are secure and correctly polarized. Use the app's balance-wire resistance detection feature to identify any faulty connections. Ensure the battery cells are within the voltage range where balancing is active.
- App connectivity issues: Ensure Bluetooth is enabled on your mobile device and the BMS is powered on. Try restarting the app or your device. Make sure you are within Bluetooth range of the BMS.
- Over-charge/Over-discharge protection activated: The BMS will automatically protect the battery. Check individual cell voltages via the app to identify the problematic cell(s) and address the charging/discharging conditions.
- Over-current/Short-circuit protection activated: Disconnect the load immediately. Inspect for any short circuits in the system or excessive current draw.
- Over-temperature protection activated: Ensure the BMS unit has adequate ventilation and is not exposed to direct heat sources. Allow the unit to cool down.
Active Balance Principle:

Image: Diagram explaining the JK BMS active balance principle. It shows how energy is transferred between cells to achieve balance during both charging and discharging, ensuring all cells are fully charged or discharged evenly, thereby maximizing battery capacity and lifespan.
Six Security Protection:

Image: Visual representation of the six security protection features: Over charge protection (prevents over-charging), Short circuit protection (automatic protection), Over discharge protection (prevents battery from running out), Over current protection (prevents current from exceeding range), ALL-IN protection (prevents cable drop or poor contact), and Over temp protection (prevents battery from overheating).
8. User Tips
- Always double-check wiring polarity and sequence before connecting the BMS to the battery pack. Incorrect wiring can cause damage.
- Utilize the mobile app regularly to monitor individual cell voltages. This helps in early detection of potential issues and ensures optimal battery health.
- When performing maintenance or modifications, always disconnect the battery pack from the BMS and any loads/chargers.
- For long-term storage, ensure the battery pack is balanced and stored at a recommended state of charge as per battery manufacturer guidelines.
9. Safety Information
- Read this manual thoroughly before installation and operation.
- Always wear appropriate personal protective equipment (PPE), including safety glasses and insulated gloves, when working with batteries.
- Ensure all connections are secure and insulated to prevent short circuits.
- Do not attempt to open or repair the BMS unit yourself. Refer to qualified personnel for service.
- Keep the BMS and battery pack away from flammable materials and heat sources.
- In case of smoke, unusual odors, or excessive heat, immediately disconnect the battery pack and seek professional assistance.
- This device is designed for specific battery chemistries and cell counts. Using it with incompatible batteries may result in damage or safety hazards.
10. Warranty and Support
This Jikong JK Smart BMS product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, technical support, or service inquiries, please contact your point of purchase or the manufacturer directly. Please retain your proof of purchase for warranty claims.