1. Product Overview
The DJI RC Pro RM510 is a high-performance remote controller designed for select DJI drones, featuring a 5.5-inch 1080p high-bright display and advanced O3+ video transmission technology. This manual provides essential information for setting up, operating, and maintaining your RC Pro controller.



2. Setup and Initial Use
2.1 Charging the Controller
Before first use, ensure the controller is fully charged.
- Connect a USB charger (12V or 15V recommended) to the controller's charging port.
- Charging time is approximately 2 hours with a 12V USB charger, or 1.5 hours with a 15V USB charger.
- The battery is a Li-ion (5000 mAh @ 7.2 V).
2.2 Powering On/Off
- To Power On: Press the power button once, then press and hold it again for two seconds.
- To Power Off: Press the power button once, then press and hold it again for two seconds.
2.3 SD Card Installation
The controller has 32GB of internal storage, which can be expanded using a microSD card.
- Locate the microSD card slot on the controller.
- Insert a compatible microSD card into the slot until it clicks into place.
- Ensure the card is properly formatted before use (refer to the controller's settings menu).
2.4 Connecting to Aircraft
Refer to your drone's specific user manual for detailed instructions on linking the DJI RC Pro controller to your aircraft (e.g., DJI Mavic 3, Mavic 3 Cine, or Air 2S).
3. Operating the Controller
3.1 Display Features
- Resolution: 1920×1080
- Dimensions: 5.5 inches
- Frame Rate: 60 fps
- Brightness: 1000 nits
- Touch Control: 10-point multi-touch
3.2 Video Transmission
The controller utilizes the O3+ video transmission system for reliable communication with your drone.
- Max Transmission Distance (unobstructed, free of interference): 15 km (FCC); 8 km (CE/SRRC/MIC)
- Operating Frequency: 2.400-2.4835 GHz; 5.725-5.850 GHz
- Antennas: 4 Antennas, 2T4R configuration
3.3 Wireless Connectivity
- Wi-Fi: Supports 802.11a/b/g/n/ac/ax with 2×2 MIMO Wi-Fi. Operating frequencies are 2.400GHz-2.4835 GHz and 5.725-5.850 GHz.
- Bluetooth: Bluetooth 5.1, operating at 2.400-2.4835 GHz.
3.4 Navigation and Output
- GNSS: Integrated GPS + Galileo + GLONASS for precise positioning.
- Video Output Port: Mini-HDMI port for connecting to external displays.
3.5 Battery Life
The controller provides approximately 3 hours of operating time on a full charge.
4. Maintenance
4.1 Cleaning
- Wipe the controller's surface with a soft, dry cloth.
- For the screen, use a microfiber cloth specifically designed for electronics. Avoid harsh chemicals.
4.2 Storage
Store the controller within the recommended temperature ranges to ensure longevity:
- Less than one month: -30° to 60° C (-22° to 140° F)
- One to three months: -30° to 45° C (-22° to 113° F)
- Three to six months: -30° to 35° C (-22° to 95° F)
- More than six months: -30° to 25° C (-22° to 77° F)
4.3 Charging Temperature
Ensure the controller is charged within the temperature range of 5° to 40° C (41° to 104° F).
5. Troubleshooting
- Connectivity Issues: If you experience difficulty connecting to your drone, ensure both the controller and drone are powered on and within range. Try re-linking the devices according to your drone's manual.
- 5.8 GHz Frequency: Note that the 5.8 GHz operating frequency may be unavailable in some countries due to local regulations. If you are experiencing signal issues, check local regulations or switch to the 2.4 GHz band if available.
- Screen Unresponsive: If the touch screen is unresponsive, try restarting the controller. If the issue persists, ensure the screen is clean and free from debris.
- Battery Draining Quickly: Ensure the controller is fully charged before use. Operating in extreme temperatures can affect battery performance.
6. Specifications
| Category | Feature | Specification |
|---|---|---|
| Video Transmission | System | O3+ |
| Max Transmission Distance (unobstructed, free of interference) | 15 km (FCC); 8 km (CE/SRRC/MIC) | |
| Operating Frequency [1] | 2.400-2.4835 GHz; 5.725-5.850 GHz | |
| Antennas | 4 Antennas, 2T4R | |
| Transmitter Power (EIRP) 2.4 GHz | ≤33 dBm (FCC); ≤20 dBm (CE/SRRC/MIC) | |
| Transmitter Power (EIRP) 5.8 GHz | ≤33 dBm (FCC); ≤14 dBm (CE); ≤23 dBm (SRRC) | |
| Wi-Fi | Protocol | 802.11a/b/g/n/ac/ax Support 2×2 MIMO Wi-Fi |
| Operating Frequency [1] | 2.400GHz-2.4835 GHz; 5.725-5.850 GHz | |
| Transmitter Power (EIRP) | 2.4 GHz: ≤26 dBm (FCC); ≤20 dBm (CE/SRRC/MIC) 5.8 GHz: ≤26 dBm (FCC/SRRC); ≤14 dBm (CE) | |
| Bluetooth | Protocol | Bluetooth 5.1 |
| Operating Frequency | 2.400-2.4835 GHz | |
| Transmitter Power (EIRP) | ≤8 dbm | |
| Screen | Resolution | 1920×1080 |
| Dimensions | 5.5 inches | |
| Frame Rate | 60 fps | |
| Brightness | 1000 nits | |
| Touch Control | 10-point multi-touch | |
| General Specs | Battery | Li-ion (5000 mAh @ 7.2 V) |
| Charging Type | Recommended to be charged with USB charger at 12 V or 15 V | |
| Rated Power | 12 W | |
| Storage Capacity | 32GB internal + expandable storage via microSD card | |
| Charging Time | 2 hours (with USB charger at 12 V), 1.5 hours (with USB charger at 15 V) | |
| Operating Time | 3 hours | |
| Video Output Port | Mini-HDMI port | |
| Operating Temperature | -10° to 40°C (14° to 104° F) | |
| Storage Temperature Range | Less than one month: -30° to 60° C (-22° to 140° F) One to three months: -30° to 45° C (-22° to 113° F) Three to six months: -30° to 35° C (-22° to 95° F) More than six months: -30° to 25° C (-22° to 77° F) | |
| Charging Temperature | 5° to 40° C (41° to 104° F) | |
| Supported Aircraft Models [2] | For DJI Mavic 3, Mavic 3 Cine, Air 2S | |
| GNSS | GPS + Galileo + GLONASS | |
| Physical | Dimensions | 183.27×137.41×47.6 mm (antennas folded, controllers not mounted) 183.27×203.35×59.84 mm (antennas unfolded, controllers mounted) |
| Weight | Approx. 680 g | |
| Model | RM510 | |
| Storage | Supported SD Cards | SanDisk Extreme PRO 64GB V30 A2 microSDXC, SanDisk High Endurance 64GB V30 microSDXC, SanDisk Extreme 128GB V30 A2 microSDXC, SanDisk Extreme 256GB V30 A2 microSDXC, SanDisk Extreme 512GB V30 A2 microSDXC, Lexar 667x 64GB V30 A2 microSDXC, Lexar High-Endurance 64GB V30 microSDXC, Lexar High-Endurance 128GB V30 microSDXC, Lexar 667x 256GB V30 A2 microSDXC, Lexar 512GB V30 A2 microSDXC, Samsung EVO 64GB V30 microSDXC, Samsung EVO Plus 128GB V30 microSDXC, Samsung EVO Plus 256GB V30 microSDXC, Samsung EVO Plus 512GB V30 microSDXC, Kingston 128GB V30 microSDXC |
Footnotes:
[1] 5.8 GHz is unavailable in some countries due to local regulations.
[2] The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
7. User Tips
- Verify Drone Compatibility: Always confirm that your DJI RC Pro RM510 controller is compatible with your specific drone model (e.g., Mavic 3 Enterprise, Mavic 3 Pro). The listed compatible models are DJI Mavic 3, Mavic 3 Cine, and Air 2S.
- Check Local Regulations: Be aware that 5.8 GHz frequency availability for drone operation can vary by country due to local regulations. Always check and comply with local laws.
- Consider Product Condition: This product is described as 'Original used 95% new'. Be mindful of this when setting expectations for cosmetic condition or potential wear.
8. Safety and Support
8.1 Important Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
8.2 Technical Support
For technical assistance, firmware updates, or further product information, please refer to the official DJI support channels or website.